Asus Direct Cu ii ati hd 6950 2gb
-
Man I would say to make sure what function that red led has, and that if the graphics card performs under conditions and stays at normal temperatures there should be no problem.
-
I have not found anywhere that it means that red LED but it is the typical one for lack of power. If I remove the 2 pci-e connectors that light turns on as well.
-
Look at the manual for the alma candida board, or if not, search the web before doing anything, you need to know what that led is.
-
Are you referring to the manual for the graphics? It's a little booklet with 1 page on how to install it in 3 steps.
-
Bm4n tells you the manual for the board (motherboard) and you say that a red led lights up near the PCI-E connectors (we deduce that it's on the motherboard) so check the manual to see what that led is for
anyway, it lets you do something, enter the bios or not even start -
The LED that lights up is on the graphics card, right above on the graphics board. -
Ahhh then that's the power led: giggles:
Here it says it's: Tested and Burned] ASUS GeForce GTX 560 Ti DirectCU II TOP Review - 3D Tech News and Pixel Hacking - Geeks3D.com But exactly what does it indicate… it may be that your power supply doesn't power it well or that the graphics card is faulty, it's difficult to know without being able to test it or with another power supply or that same graphics card in another computer.
-
The million-dollar question, but does it work or not, if not, to use the warranty, regards
!AMD Power!:D
-
Check what amperage your source has for the 12V line. -
It has more than 70A on the 12V line so it seems to me that the power supply is not the problem… It looks like the graph is broken...
Regards
-
solved! it was the pci-e connectors, I put the modular ones instead of the ones that go directly to the source and it's like silk! -
Well, if the source is under warranty, you know, before it expires, send it back.
-
yes, if that's the case, it's almost certain that your power supply has a fault, maybe a bad connection in a cable or something similar. as they have told you above, don't think twice and process the warranty if you can. it's better that you do it directly with corsair and not with the store where you bought it, corsair has impeccable customer service, they usually don't put up any obstacles and they take very little time. once I had to change a corsair power supply, they sent a delivery person to my house to pick up the faulty power supply and delivered a new one at the same time, that is, without having to wait absolutely nothing to assemble the new one. -
Well in my opinion, his problem was solved by plugging in the 6+2 PCI-E cable from the modular power supply, (logically this is the one designed for graphics cards), not the 6+2 that comes from the power supply, (12v auxiliary connector for the motherboard), I don't think it has any fault :rollani:
!AMD Power!
-
Well, in my opinion, the problem was solved by plugging in the 6+2 PCI-E cable from the modular power supply, (logically this is the one designed for graphics cards), not the 6+2 that comes from the power supply, (12-pin auxiliary connector for the motherboard), I don't think it has any fault :rollani:
!AMD Power!
Did the connector fit well? Without forcing it, I mean? ¿|:|
-
If in the manual of the source it is named as EPS/ATX 12V 8 & 4 Pins, this is not for the PCI-E (graphics), but the alignment of the ATX plates
Best regards
-
I say this because almost all (if not all) PC graphic connectors and others have certain chamfered corners so that they only fit into certain connectors and in a single position (for example, the four-pin molex)
-
This post is being processed/translated. The original version will be shown:
¿Estabas conectando la alimentación extra de la placa base a la gráfica?
-
This post is being processed/translated. The original version will be shown:
Si CNCBCN, estos dos son igulaes al ser de +12V, bueno te lo digo por que en mi placa base e conectado el de 8 PCI en la alimentación ATX pues es de 8 también, estas conexiones acostumbran a ser compatibles el 4 6 y 8 lógicamente las de +12V, las de +5V y demás no son compatibles los Molex.
Si Bm4n por lo que a escrito si eso es lo que a echo, un saludo!AMD Power!
-
This post is being processed/translated. The original version will be shown:
cuanta pasta te has dejado en velas
por que hacer eso y no fundir nada ….
pues nada me alegro que finalmente no seria nada
P.D en los cables adecuados si que pone PCI-E ¿no?como no tengo muy claro si va por mi o no , lo aclaro directamente aqui http://traficantesdehardware.com/Reviews-Hardware/Review-Tacens-Valeo-II-700W.html esta es mi fuente y los cables están bastante diferenciados rojos para PCI e ( graficas ) y negros no modulares para la placa
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse