New motherboard

[JoseFR]

@jordiqui:

I have a doubt about all this. Have you solved the RAM problem in the other thread you have open? Because if you have tried all memory banks and you still get the same problem: it detects 8 but only uses 4 first I would get a little wet with everything related to hardware and as your partner says, be clear about what you are going to use the PC for: office work, games, overclocking, since this determines the form factor, components, etc. I am really curious to know what is really wrong, a screenshot of the bios would not be bad.
Good luck and wait for 2012.

The RAM problem is still the same, I can't guess what it might be. I read the motherboard specifications and it supports up to 16 GB so I am still in the same situation. I have been looking around the internet, some tutorial from people who have had the same problem and I have tried some things but we are still the same. The only thing I managed was to update the bios so that it marked 4 GB as usable instead of 3 with something (I think it was 3.90 or something like that)

I will wait for 2012 as I have to start collecting funds for the motherboard, processor, etc. I ask for advice more than anything because I can see many numbers and things that I say "wow this seems to be good…" but when it comes down to it it's not a big deal and as I don't know very well how to interpret them, I find it hard to know what is good for what I want or not.

Well if you tell me that you need to see from the bios I will put the picture in the other thread without problems, more than anything so as not to have to take a picture of all the bios options

I really appreciate the help

edit: I forgot that I mostly use it for games, overclocking gives me a little respect but I would also like to learn how to do it properly

[jordiqui]

@JoseFR:

.Lo único que conseguí fue al actualizar la bios que me marcase como utilizables 4gb en vez 3 con algo(creo que era 3.90 o algo así)

Una pregunta absurda, ¿puedes hacer una captura de pantalla en *C:* para ver qué carpetas aparecen? deberían aparecer dos carpetas de archivos de programa. Si haces la captura creo que me sacas de una duda muy obvia.

Antes de entrar aquí en el foro que te voy a escribir, haz una captura de pantalla de lo que te he comentado, simplemente para que no pierdas el tiempo.
TechNet
te registras y buscas un hilo con algún problema similar al que te ocurre, aunque microsoft te dirá que el problema no suele ser de ellos.:D:D:D
pero lo dicho, captura de pantalla y nos ahorramos tiempo. Y mucho me temo que sé lo que es pero sin capturas de pantalla no se puede hacer nada.

[JoseFR]

![http://img833.imageshack.us/img833/9500/88530803.th.jpg]

here you have the photo

[jordiqui]

@JoseFR:


aqui tienes la foto

A technet and test what you were told before (load the minimum devices, etc.) because either a memory module is failing or something is not configured correctly. I assume the bios is with the parameters of the ram in manual, timings, etc.

[JoseFR]

@jordiqui:

Check the technet and test what you were told before (load the minimum devices, etc.) because either a memory module is failing or something is not properly configured. I assume the BIOS is set to manual RAM parameters, timings, etc.

I set the timings to manual and entered the manufacturer's settings 9 9 9 24 2N but even when on automatic it showed the same thing :S they were exactly the same. The only thing I can think of is taking a picture of the timings to see if I need to change something else, but as I looked at the data, the RAM was the same in the BIOS, even when on automatic.

I also tried changing the RAM positions and the PC wouldn't even start. pc.no I don't know if it's because the other two slots I have free don't work, plus a light that says RAM ok turned on, the light stays completely fixed and the PC does nothing.

I edit a question, on the motherboard there are some pins that say OV DRAM on top, I have the first pin free and the second and third are covered with a blue cap, what function does that have? I just tried the RAM separately and both are fine, I don't get any errors, it recognizes them separately

![http://img338.imageshack.us/img338/7648/10122011122.th.jpg Uploaded with [url]ImageShack.us[/url]) Uploaded with [url]ImageShack.us[/url])

![http://img7.imageshack.us/img7/460/10122011123.th.jpg Uploaded with [url]ImageShack.us[/url]) Uploaded with [url]ImageShack.us[/url])

![http://img249.imageshack.us/img249/8884/10122011124.th.jpg Uploaded with [url]ImageShack.us[/url]) Uploaded with [url]ImageShack.us[/url])

![http://img202.imageshack.us/img202/4508/10122011125.th.jpg Uploaded with [url]ImageShack.us[/url]) Uploaded with [url]ImageShack.us[/url])

![http://img11.imageshack.us/img11/7811/10122011126.th.jpg Uploaded with [url]ImageShack.us[/url]) Uploaded with [url]ImageShack.us[/url])

Here are the BIOS photos as well, I took pictures of everything I thought might be necessary to see if I have something wrong

[JoseFR]

This post is being processed/translated. The original version will be shown:

en technet no tienen ni idea de que puede ser :S.Lei algo sobre los procesadores buscando por el foro el mismo problema que el mio,y decian que podria ser por culpa del procesador pero no se si sera verdad eso o no :S,ami desde luego no saben que puede ser lo que me pasa ya que algunas opciones que dicen de desactivar y tal las tengo como dicen en el foro :S

[Fassou]

This post is being processed/translated. The original version will be shown:

Sobre lo del problema con las memorias, mira este post

Salu2!

[JoseFR]

This post is being processed/translated. The original version will be shown:

@Fassou:

Sobre lo del problema con las memorias, mira este post

Salu2!

gracias fassou,voy a mirarme eso aver

[manolovic]

¡Esta publicación está eliminada!

[Franziskaner]

¡Esta publicación está eliminada!