pues parece un pony láser, tipo arma del half live ;D

@Franziskaner:

no seáis malos ….
Dispositivos de los ordenadores
que tocho DIOS :wall:
si alguno se lo lee entero le regalo puntos ;D;D
saludos

He puesto una imagen de mi pequeño pony, no puedo ser malo

no seáis malos ….
Dispositivos de los ordenadores
que tocho DIOS :wall:
si alguno se lo lee entero le regalo puntos ;D;D
saludos

Esa imagen tiene más sentido que este hilo.

Mid tower

Mini tower Here no one has told you about a full tower, which I don't think you have any idea what it is. What I have told you is that if you want us to recommend cases, put a measure because in mini tower you not only have mATX but also some ATX, which by the way is a motherboard format NOT a case format, and I tell you this because it's better for you, piece of troglodyte. If you can't explain yourself and on top of that it bothers you when you're asked for a measure, don't enter the forum, Obione has answered the rest correctly. I hope now I have been explicit enough.]]>https://foro.hardlimit.com/en/post/510841https://foro.hardlimit.com/en/post/510841Mon, 07 May 2012 18:52:08 GMT@Bm4n:

I'm going to be more explicit, if you don't say what space you have for example that you need that doesn't exceed such height/width/depth we'll figure out what you're looking for. If not, kid, the cases are for tastes, look for mATX and what you like, I don't buy mATX cases the only ones I know more or less are the Fractal.

What I was saying my LianLi A05 is the same height as the NOX that Franziskaner puts on so you understand that sometimes mATX doesn't make sense but will simply limit you. But let's not try to do more research, who should be interested in explaining is you... I suppose, so you don't get the graphics card in because of the length, a decent cooler because of the width, that it's noisier because you have to mount 80s will be your problem.

let's see if we figure it out: I need an m-atx case because of space issues (it's obvious to point out the dimensions if I indicate that there's a space limitation for full towers). and that's it, there's nothing more because there's no need for more explanations. if you don't know about these: then don't enter the post and more to ramble and not give solutions. those are the ones who don't figure it out...

P.D.: I'm closing the post on my part because I already have a solution to the event.

Lian Li PC-V354B
SilverStone TJ08-E

The Aerocool that you have proposed is not smaller because it is compatible with m-ATX boards, it simply has more space left over in the case around the board. But you could very well put an ATX format board inside it. If what you have is a space problem, you simply need a small case, which has nothing (or little) to do with the board formats that you can mount in it. There are cases larger than my wardrobe and m-ATX boards can be mounted in them.
There is no need to get tense over these technical issues ;D;D. I hope I have clarified the reason for the insistence of the colleagues on this issue.

We are here to try to help anyone who wants to be helped.

Best regards

Cooler Master Elite 342 MicroATX RC-342-KKN1-GP Caja/Torre

¿Y que quieres que te explicite?, es una pregunta: para que quieres montar una mATX pudiendo montar una de tamaño completo (que suelen tener más slots, puertos, fases, etc.).

no has leido el enunciado completo del post verdad??? el equipo ha de ser m-atx por eventos de espacio

P.D: estoy leyendo muy buenas criticas respecto a los Thermalright TY-140… interesante.

For micro atx, it's silly with that configuration.

more explicit, please…
this set can't stand on its own??? give me reasons

P.D.: Better the Gentle Typhoon.

Too much plaque it seems, you can also save some on the heatsink, if that you can get a 7870.

It would be good if you commented on the models of cases they have.

give me suggestions, obione

It would be good if you could comment on the models of cases they have.