Mother and Micro temperature

[lforos]

If you have something more serious to test, you have nothing to lose, but I fear it will be difficult for me to fix it if the problem is with the motherboard.

Has this problem always occurred, in recent days, or since you upgraded the BIOS? (if you think it could be the latter, you already have your answer …)

[lejo78]

@lforos:

If you have something more serious to try, you have nothing to lose, but I fear it will be difficult for me to fix it if the problem is with the motherboard.

Has this problem always happened to you, in recent days, or since you upgraded the BIOS? (if you think it could be the latter, you already have your answer …)

this problem started a few months ago, when I was playing pes 2010, it didn't happen before. I am also experiencing monitor blackouts that occur when the system is not using any resources. I mean... the PC keeps working but the monitor turns off.

[Franziskaner]

@lejo78:

Sorry but I don't know how to use CPU Burn-in, sorry for my ignorance.

Needless to say thank you for responding

very easy, you download it from the link I gave you, you run it (twice, because you have two cores) you set 30 minutes and start, and it has to raise the temperatures. If it doesn't, then you either have the motherboard probes screwed up and the micro sensors screwed up and no, that's not fixable.
but in fact the problem is not serious (I have the same thing happen to me, only it marks me as over) and my solution was to disable the temperature over safety in the bios :wall:
regards

[Tecnho]

You have checked that the heatsink makes good contact with the processor and is properly fitted, and that the thermal paste is well distributed with a thin layer.

Regards.

[lejo78]

@Tecnho:

Has comprobado que el disipador hace bien contacto con el procesador y está bien ajustado, y con la pasta térmica bien distribuida con una fina capa.

Saludos.

Si broo, eso esta comprobado ya que le cambie el disipador y cooler para ver si solucionaba el problema

[Franziskaner]

lo dicho.
de todos modos mirate this
that will serve you as an example so you can see what you have to "upload" as images

[Fassou]

As you have already been answered in another of the forums where you posted the query ¬¬, update the BIOS.

@Asus:

Version 0515
Description P5SD2-VM BIOS 0515
1. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx
2. Fix sometimes the password is requested when entering BIOS setup even though the password function is diabled.
3. Fix POST beeps too many times when onboard VGA is disabled and no add-on VGA card is installed.
4. Fix system cannot enter Windows Vista after installing VGA driver for ATI EAH3850 VGA card.
5. Modified CPU temperature measuring algorithm.
File Size
438,74 (KBytes) 2009.07.06 update

Salu2!

[lejo78]

@Fassou:

As you have already been answered in another of the forums where you posted the query ¬¬, update the BIOS.

Salu2!

If it is an option, logically I consult in several forums as anyone would, since I look for different opinions to be able to continue testing and verify what the real problem is. I value all the opinions a lot because everything serves me. Thanks for pointing it out ;D

[lejo78]

Well for the moment I changed the power supply to a SENTEY EXTREME 400W R. everything remains the same, I still have to flash the bios, I don't have a disk and the AZ-FLASH doesn't recognize the USB drive. so I'll buy a disk and comment on how it went

[lejo78]

Well, the bios has already been updated (to the same version that I already had, which was the most up-to-date to download), but maybe changing things would help.. here are the results that are the same. So I rule out:

*Updating the bios
*Cleaning and changing thermal paste
*Changing the heatsink and micro cooler
*Changing the thermal paste of the Chipset
*Cooling the tower
*Changing the power supply
*Checking temperatures in bios
*reading temperature with different software

here are the photos:

http://i.imgur.com/mSRsO.jpg

http://i.imgur.com/wCkMS.png

http://i.imgur.com/qy3lW.jpg

well you guys will say what's next and thanks for the answers

[Franziskaner]

This post is being processed/translated. The original version will be shown:

cuando dices que has actualizado la bios a : (a la misma version que ya tenia que era la mas actualizada para bajar) me estas diciendo que has instalado la misma bios que tenias AHORA por que si es asi ….:facepalm:
saludos

[Franziskaner]

This post is being processed/translated. The original version will be shown:

¿alguien sabe como desactualizar la BIOS ?
me explico : si Lejo78 tiene que poner una BIOS anterior a la que tiene lo mas probable es que la P.M le mande al peo y le diga que : la version que intenta instalar es ANTERIOR a la actual .
a mi personalmente me a pasado
saludos.

[Bm4n]

This post is being processed/translated. The original version will be shown:

Yo con todas las placas que he tenido puedes flahsear cualquier BIOS, anterior o posterior a la que tenga.

[Nemo]

This post is being processed/translated. The original version will be shown:

Yo apuesto por que se han muerto las sondas de temperatura de la placa.
Con un sistema de medición externo saldrías de dudas, tipo esto podrías saber la temperatura real (o al menos aproximada) de los componentes.

Un saludo

[lforos]

This post is being processed/translated. The original version will be shown:

@Franziskaner:

cuando dices que has actualizado la bios a : (a la misma version que ya tenia que era la mas actualizada para bajar) me estas diciendo que has instalado la misma bios que tenias AHORA por que si es asi ….:facepalm:
saludos

No pasaría nada. De hecho, si hubiese tenido algún error la primera vez que instaló la nueva versión, en la segunda podría haber funcionado bien. Ese no es el problema.

Lo de ir a una versión anterior no es mala idea. Sería cuestión de probarlo y ver si es un error de la nueva BIOS. Si sigue sin funcionar, me temo que el diagnóstico inicial de fallo en los sensores de la placa es el más probable. Dudo que eso tenga arreglo, al menos fácil.

[Franziskaner]

This post is being processed/translated. The original version will be shown:

@Bm4n:

Yo con todas las placas que he tenido puedes flahsear cualquier BIOS, anterior o posterior a la que tenga.

eso sera tu opinión ¿no?
saludos

[lejo78]

This post is being processed/translated. The original version will be shown:

Quizas no entendi bien… lo que me proponen es que instale una version de bios anterior, ya que esta puede que presente falla. no tengo problema en probar si me aseguran que no corro riesgo de joder la placa. los prosedimientos para actualizar la bios los conosco y no tengo problema en hacerlo.

espero confirmacion, de lo contrario podriamos decir que los sensores son el problema.

[Bm4n]

This post is being processed/translated. The original version will be shown:

@Franziskaner:

eso sera tu opinión ¿no?
saludos

Eso es mi experiencia, majete

[Franziskaner]

This post is being processed/translated. The original version will be shown:

@lejo78:

Quizas no entendi bien… lo que me proponen es que instale una version de bios anterior, ya que esta puede que presente falla. no tengo problema en probar si me aseguran que no corro riesgo de joder la placa. los prosedimientos para actualizar la bios los conosco y no tengo problema en hacerlo.

espero confirmacion, de lo contrario podriamos decir que los sensores son el problema.

como bien te dice Fassou en el post 17 SI TIENES LA VERSIÓN 0515 TE DARÁ FALLOS EN LA TEMPS
LO PONGO EN MAYÚSCULAS PARA QUE SE LEEA Y SE ENTIENDA BIENNNNNN :wall::wall::wall::wall:

Bm4n hoy no se mañana puede . te colgare una fotico para que veas MI EXPERIENCIA :troll:

… .- .-.. ..- -.. --- ...

[Bm4n]

This post is being processed/translated. The original version will be shown:

@Franziskaner:

Bm4n hoy no se mañana puede . te colgare una fotico para que veas MI EXPERIENCIA :troll:

No se porque debería interesarme :facepalm: