Complete PC for gaming
-
-
- I wouldn't mind waiting, but I also don't want a state-of-the-art PC, and the new ones are usually more expensive.
Lately the prices are not exaggerated for quads and there is a socket change, I don't remember the estimated price (in $) but it was reasonable, I would expect them to be just around the corner.
-
something like this would be fine

regards
-
From the options you've proposed, I've done some research and I'm going with this combination.
I have some doubts about the monitor, I've seen good reviews and not so good ones, but for that price and 23" I think they will all be similar. Any better options from your personal experience?
Do you think the processor fan is necessary? Because in the specifications it says it's included, but the PcComponentes configurator says it's mandatory.

Best regards.
-
Of the options you've suggested, I've done some research and I'm going with this combination.
I have some doubts about the monitor, I've seen good and not-so-good reviews, but for that price and 23" I think they'll all be similar. Any better options from your personal experience?
Do you think the processor fan is necessary? Because in the specifications it says it's included, but the PcComponentes configurator says it's mandatory.

Best regards.
CPU coolers as a rule and speaking very badly are: crap :troll:, especially if you plan to overclock, otherwise they are very noisy. For about 20 euros more you can get a micro (CPU) series K with real options for OC, anyway I think in this forum you were told to wait for the new Intel platform (which changes very often and I don't think it's a plan to buy the "old" one now)
if you wait a little the "old" platform will drop in price / and the new one will last longer (that's Intel not AMD)
regards -
I agree with Franziskaner. If you can wait 2 months perfect, and from the micro the K. From what I have read they go up, as a rule, much more than the normal ones.
And if it is to play get a wired mouse. Any logitech keyboard, even if it is wireless, and mouse the one that is most comfortable for you. "Design" (to call it something) and I end up always using a wired one because of the dpi issue. It helps a lot and in the end you don't even notice the cable.Good luck
-
Well, here's another one who supports the motion to wait for the new one. I won't say anything about the K designation of the micro since you claim not to want to OC in any case, and about the heatsink, more of the same... the stock one is acceptable, although in the long run the processor will appreciate one that's a little better.Regards
-
A question:
If I buy a PC as I described above, and later I want to change the micro to one of the new Intel ones that you mention, will I need a new motherboard, or would it be compatible with the one I already have?
Best regards.
-
A question:
If I buy a PC as I described above, and later I want to change the micro to one of the new Intel ones that you mention, will I need a new motherboard, or would it be compatible with the one I already have?
Best regards.
:troll::troll: on Intel platform? How funny.
Well, jokes aside, Intel changes the socket every time it changes platforms and therefore you would have to change the motherboard, that is the difference (apart from performance) between Intel and AMD
Best regards
P.D. Unless you are in a hurry, wait for the new Intel platform, that even in the worst case if you don't buy the new ones the old ones will go down in price. -

¿Por que no la B75M-ITX? Ademas esa que pones no sirve…
Huye de fuentes Corsair
¿Por que no las Ripjaws X?
Por curiosidad, grabadora en el 2013 ¿que usos le seguis dando?
¿El ventilador del procesador lo véis necesario?
En tu caso no ya que el de Intel cumple mas que de sobra y es muy silencioso:
"La semana pasada me monte yo un pc ITX gammer y no se oye absolutamente nada"

Si me compro un PC tal y como he descrito arriba, y más adelante quiero cambiar el micro por uno de los nuevos de Intel que comentáis ¿necesitaré una placa base nueva, o sería compatible con la que ya tendría?
Distinto socket, no seran compatibles
Seguramente no merezca la pena pasar de un i5 ivy bridge 1155 a un i5 haswell 1150
Nunca compres hardware nada mas salir al mercado como procesadores, graficas, placas base, etc
-
Why run away from Corsair sources?
-
¡Esta publicación está eliminada! -
I reiterate Tecnho's question… Avoiding Corsair sources? What is the basis for this recommendation?
Best regards
-
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada! -
This post is being processed/translated. The original version will be shown:
¿Por que no la B75M-ITX? Ademas esa que pones no sirve…
Huye de fuentes Corsair
¿Por que no las Ripjaws X?
He elegido esa marca simplemente porque dos de los foreros la recomendaron.
Por curiosidad, grabadora en el 2013 ¿que usos le seguis dando?
Pues a veces me grabo discos para oirlos en el coche, además que por 16€ tengo lector/grabador por si acaso.
En tu caso no ya que el de Intel cumple mas que de sobra y es muy silencioso:
"La semana pasada me monte yo un pc ITX gammer y no se oye absolutamente nada"

Le voy a echar un vistazo.
PD: creo que este forero está baneado, pone "Expulsado" bajo su nick. ¿En que quedamos con el tema de las fuentes Corsair?
-
This post is being processed/translated. The original version will be shown:
Pues tal y como te imaginarás, las fuentes Corsair son buenas, fiables, eficientes, potentes y encima tienen muchos años de garantía, por eso te las recomendamos.
Mira en nuestras firmas, la mayoría tenemos alguna fuente Corsair, y sobra decir que nos van estupendamente :sisi:
Saludos
-
This post is being processed/translated. The original version will be shown:
Se fija en la tontería de el índice de RMA de una marca es superior en 0.03%, como hizo con el tema de los WD black y los 7200.14. Chorradas. Así le han expulsado. Su argumento es "esto es así porque lo digo yo, que lo leí" sin citar fuentes.
Mientras tenga pfc activo, que lo tienen todas las de marca conocida, eficiencia de, al menos, un 80-85% y si la quieres modular para no tener tanto cable dentro de la fuente cómprala.
Para que te hagas una idea. He tenido Enermax 350w, una maravilla; Seasonic 600w, comprada en el foro a krampak creo; Tacens 650w Cu, modular, Tacens 450W normal en el de mi hermana; Tacens 500W en el equipo que uso en la oficina, y menos la Enermax, que rompió despues de estar encendida durante 8-9 años, las demás tienen de media 5 años y ni un sólo problema.
Es como el tema de Acer. Tienen un RMa alto, pero son los que más portátiles venden. Así normal.Lo mejor la foto. El que más sabe y usa el disipador stock porque le va a montar una Rl, en esa caja… Pa qué?
PD: los que tienen Corsair es porque están comprados por la marca :troll:
