How do I connect it?
-
This post is being processed/translated. The original version will be shown:
Hola, estoy intentando montar un ordenador y me he quedado estancado en la conexión del audio con el panel frontal (microfono y ariculares). El manual de la placa no lo entiendo bien porque viene en ingles. La placa es K7S5A pro, la cuestion es que tengo 4 cablecitos para 9 pines y no se el orden. Para una mayor aclaración aquí os dejo unas fotos:
Esto es lo que pone en el manual:
AUDIO2: Front Panel Audio header
This header allows the user to install auxiliary front-oriented microphone and
line-out ports for easier access.
Pin Signal Name Function
1 AUD_MIC Front Panel Microphone input signal
2 AUD_GND Ground used by Analog Audio Circuits
3 AUD_MIC_BIAS Microphone Power
4 AUD_VCC Filtered +5 V used by Analog Audio Circuits
5 AUD_FPOUT_R Right Channel Audio signal to Front Panel
6 AUD_RET_R Right Channel Audio signal to Return from
Front Panel
7 HP_ON Reserved for future use to control Headphone
Amplifier
8 KEY No Pin
9 AUD_FPOUT_L Left Channel Audio signal to Front Panel
10 AUD_RET_L Left Channel Audio signal Return from
Front PanelUna de mis grandes dudas es si tengo que quitar alguno de los jumpers que vienen en la primera foto.
-
This post is being processed/translated. The original version will be shown:
Puwes tienes que conectar estos, antes quita los jumpers
1-2 microfono
5-6 in/out canal derecho
9-10 in/out canal izquierdoel resto no los conectes
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse