Super PI Test (The 30 fastest PCs from HardLimit)

[Redesoft]

This post is being processed/translated. The original version will be shown:

@incrediboy:

noctua? medio kilo?… me extraña que pese tan poco.

sobre lo de verlo por software que yo sepa no se puede, solo se puede saber mirando la caja o el ihs(chapita donde se echa la pasta termica)

Realmente no sé cuanto pesa. Solo se que si se me ocurre cerrar la torre eso lleva a 70 grados así que tiene que estar destapada y por otra parte creo que me costó unos 70 euros … que luego he visto por algunas tiendas kits de refrigeración liquida que valen mas o menos lo mismo... si lo llego a saber antes me compro un kit de esos

[Tecnho]

This post is being processed/translated. The original version will be shown:

Los kits de RL son un poco guarrada, y esos 70º algo va muy mal ahí, porque con ese voltage y siendo un sandy no puede ser, mira ver ese disipador porque lo tienes que tener mal colocado.

[Redesoft]

This post is being processed/translated. The original version will be shown:

Eso es si cierro la caja y lo subo de vueltas y procesando un rato, así de normal…

A la frecuencia que pone ni caso, va a X45 de normal aunque para el super pi lo puse a X48, aun le puedo subir un poco mas jugando con el voltaje pero se vuelve tremendamente inestable. Me creo que el problema es la memoria que es 1333, lo mismo de tenerla de 1600 no petaría tan pronto.

[Xevipiu]

This post is being processed/translated. The original version will be shown:

@Redesoft:

Bueno. Acabo de registrarme después de haber estado mirando algunos posts sobre overclock. La verdad es que se me da bastante mal porque se me ha petado el pc 34853974593 veces XD menos mal que estas GB se "resetean" solas.

En fin, ya que estaba he hecho un superpi de mi equipo.

Un saludo a todos XD

**No tiene fé, eso es un BUG, me pasa lo mismo con la MSI en muchas ocaciones, en cambio la M4E marca el real xD

**

[rul3s]

This post is being processed/translated. The original version will be shown:

Bueno, aqui subo mi superpi, con el que me coloco en segundo lugar

Refrigeracion por aire con un noctua nhu12, y memorias Gskill 1600 cl7 7-8-7-24

Un saludo!

[Sylver]

This post is being processed/translated. The original version will be shown:

Me lo estaba oliendo al ver el otro post en "Comiendo sandya", pero no estaba seguro…

¡Enhorabuena por la subida!

Saludos

[Xevipiu]

With a little more time, I hope to improve it

[krampak]

Is RL or is that already 1-phase?

Rules, hang me an image with a resolution that I can read xD

[rul3s]

@krampak:

Still RL or is that already 1-phase?

Rules, hang me an image with a resolution I can read xD

Here you go!!

[krampak]

Do you have info on the speed and timings of the memories?

[Xevipiu]

@krampak:

Still RL or is that already 1-phase?

**Ostia, I can't remember if it's the micro that I used under RL or with the LS, in any case put under "Phase" The physical limitation is the same under RL as LS

Ahh, tomorrow I'll pass by your town, I have a road bike outing from Girona to Vallter2000, so I'll definitely stop by your town xDD**

Carrer del Riu Terri to Carrer desconegut - Google Maps

Salut fiera

[krampak]

Well without decent memory and with a somewhat vague CPU I think for now I leave it here xD What voltages do you use in the memory those who go to cas 7-7-7? To me at 8-8-8 it wouldn't start anymore, that is if interleave / bank and 1T are activated, although perhaps the first thing would be to remove 2 modules.. which with 4 has always been more complicated.

[Tecnho]

Another sandy ehh, you're heating up my head, you'll see in the end I end up with a 2600k of those XD.

[_Neptunno_]

@Tecnho:

Another sandy ehh, you're heating up my head, you'll see in the end I end up with a 2600k of those XD.

Lol, the last day you'll see me with one Anyway Krampak was coming from a 775 it was time for a change and more coming from him, with what has been tinkering around these forums hehe.

Greetings!!

[Tecnho]

Well, I'm already looking at z68 motherboards, so I'll probably get one this month and get rid of my precious 920 and XDD set

[Obione]

Overclocking memories have never been very important and in the Sandy they are very little noticeable. Don't worry, we are old enough to not bother with benchmarks :chuckles:

On the other hand, I think you have put a lot of voltage in it, I hope it is not more than to pass a SuperPI. If I were you, I would not go beyond 1.4 in normal mode.

From what I have read, there comes a point when it asks for a lot of voltage or it does not go beyond a certain frequency. I have tested up to 4.5GHz and the demand for voltage is linear. I leave you the OC/Vcore graph I made, along with a table that also has temperatures. As you can see, the temperature does shoot up from 4 and a half but well, we are talking about pretty cool micros, nothing to worry about with a quality/price cooler, not to mention price. What cooler did you put in it?

http://imageshack.us/f/14/12219012.jpg/

[Bm4n]

Watch out krampak, at those speeds you're going to have to play with the rest of the CPU voltages, and then if you disable a couple of cores it will also help.

[Obione]

Cierrtoo, good point. From 4.8, it's time to cheer up PLL but watch out for overvolt eh

To give it a go with memories, VTT can also help, I think it's on Gigabyte for VCCIO.

Editing: My board is very sad with the voltage adjustment. It has Vdroop, I can only touch Vcore/vRAM, I don't have dynamic voltage for micro and the PLL adjustment is an on/off :hangover:

One of these days I'll try the latest BIOS, a user of the MSI GD65 told me it improved the Vdroop.

[krampak]

So that's it, I've only touched the Vcore to get 4.9. I know it's high, I'm not going to leave it like that. Now I have it at 4.4Ghz factory voltage, the heat doesn't keep up, anyway at 4.7Ghz 1.42V was stable and didn't reach 70ºC with all 4 cores maxed out, this beast I've built does wonders :chuckles:

What PLL/VTT voltages etc did you reach for the 5.1 Bm4n?

Krampak the memories have never been very important and in Sandy they are noticed very little. Don't worry about it, we're old enough not to get worked up about benchmarks

True, I don't get worked up like I did 6 years ago XD I mentioned the memories because I'm not sure if they have to have specific chips or if I'm not playing well with the voltages, that's why I asked what voltage they used.
I also have a lot of Vdroop, 1.5V in BIOS stay at 1.42V at full load, I don't know if there's an option like 'load line calibration' like my P35 had that avoided that problem.

[Tecnho]

Krampak, if that photo is from your build, it's out of curiosity because you have the fans upside down, do you have any inverted case or some kind of invention?