-
Hello everyone
It had been a long time since I last visited here and it's that the Raid0 has crashed. It gives me an error on one of the disks. I provide a photo of the loading screen:
In the end, after getting kicked out a few times, the Windows error fixing tool let me get into my session and save everything I didn't want to lose. What I would like to ask you is, if the hard drive is already unusable or if I can format it and make a raid0 again with it. Or if there is any program that can tell me the status of that disk.
-
When it flags an error, something is wrong, you should check the SMART in the controller application, which depending on the one you use, may give you the option to run an error check. But let's say that after a disk gives errors, I don't trust it anymore to be without recent backups, it can work for years without giving more errors or give one and leave you with your pants down.
-
I don't have any raid controller card, how can I do an error check like the one you mentioned?
Thanks in advance
-
With any program that has SMART, which is a technology of the disks, not something that only some dedicated controllers have.
-
Thank you very much everyone ^^
-
Although I always share the idea of making backups even when the disks never fail (in a Raid 0 with two disks you duplicate the failure rate), it is possible that the disk is not physically bad but that a bad shutdown or a blue screen have left some data unusable, because in fact the raid 0 continues to diagnose it as normal.
Apart from the checks that have been told to you (or better, after those checks) enter the Intel Matrix storage Console program (if you do not have it installed download it from the Intel website) and with the right button on the hard drive that has given you the error, mark it as Normal again.
-
Although it is integrated you have a controller or else it is a bad thing, the smart can normally not be checked but through the controller's software. The intel give few options, the amd you can manually configure the checks, also sometimes there is the option of smart in raid in the bios although I do not know how it works.
-
The capture is controlled by the Intel Matrix Storage Manager, which is the typical on-board controller. As far as I know, with Intel software (Intel Matrix Storage Console) you can't see SMART information, but it does provide some useful information.
-
thanks for the information guys, it has been very helpful
-
With a Raid 0 it is always advisable to have a disk for backups. Moreover, I have already checked that bad shutdowns can cause problems such as losing the data you currently saved. That is to say, you turn on the PC, work/play and the files that were modified/created during that time, if it turns off badly due to a blue screen, you lose them, not always but it can happen quite a few times.
Greetings!
-
yes, I will have backups from now on. This week I had to order from pccomponentes for the hard drive and a couple of other things (taking advantage of the shipping costs :D) thanks for the help. Regards -
If the disk is not physically broken and the data is important, you can recover it with Getdata back raid recovery.
-
¡Esta publicación está eliminada! -
¡Esta publicación está eliminada!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse