Graphic enlargement
-
what a weirdo the guy is :D:D I've never had an SLI or two graphics cards plugged into the same PC, but I'm saying that you'll need the drivers for both, each with their own, because otherwise I don't think it will work. but beware that I could be wrong, that's what I have a mouth for, but I don't think so :D:D:D
P.D every day you can learn something new ¿ what's up for today? :D:D
edit : after a trip with Mr. Firefox you install the drivers for both and the 260 you configure it as physx and run. here they comment on the topic http://www.elotrolado.net/hilo_activar-sli-en-placas-no-soportadas_1311382_s20 -
Interesting, according to the forum you posted, you can put 2 SLI even if the card doesn't support it? :|:| I had no idea.
-
can someone confirm this to me plz? -
¿el que?
-
A GTX260 for Physx is something exaggerated, today. You won't get the most out of it, at least that's my conclusion after analyzing some comments and tests from other users.
You're better off selling it and with that extra € you can get a slightly more powerful Nvidia and you can use Physx almost without problems.
As for SLI, I don't know if you'll be able to do it with your card, it could limit your performance compared to other platforms, but well.On the subject of physics, the recommended thing is to use a G80 or G92, using a superior model, it seems that it doesn't pay off in terms of performance/consumption.
I've even seen the same real performance in physics from a GTX470, GTX295 and 8800Ultra for physics in various games, without hardly varying a few fps, not even in the minimum.
It seems that the explanation is somewhat simple and I hope to explain it well (or understand its explanation when they gave it to me), but if I get confused in any data, tell me
The G80 and G92 have the Alu units separated from the Shaders, so these can be used exclusively for Physx and the Alu units are wasted, reaching almost 100% of the GPU for physics, ok?
That's why if we OC the graphics card that we have dedicated to this task, it's better to increase shaders than the Core, because where we will really notice the improvement of the OC is here since the other is not directly "used", to put it in a way.However, in the GTX400 (I don't know if the GTS450 changes this, honestly or the GT200... although they are different from the G80/92, but I don't have that much data), this changes a lot.
Inside each SM carries its own Alu and its cuda cores. The Teselator goes to the side, this doesn't influence.
What this does is that the graphics card isn't well used for physics, since the way its architecture is built makes it not get 100% of its performance.All this talking about games (which seems to be the majority), use the Shaders for physics.
When we focus on the use of an application/game that uses the Alu for physics, the GTX400 crushes by knockout.Anyway, I hope I haven't said something incorrect, although it's possible that I left something out, that is, if someone sees something more, don't hesitate to say it, we're all here to learn. And note, I know this because of what other people have told me and various readings on the subject.
Greetings!!
P.D: If I had time and "desire" I could do some tests to see that this is true firsthand (or maybe it's not like that :risitas:)
With the GTX470 and the 8800GT that I have, using them for physics with the HD6950 could be interesting the results that the tests would show.
But... ains how little desire to mess around lately!! -
I edit because I hadn't seen the second page of the post xD
Good explanation Neptunno
-
From what I've read, they say it's possible, but it doesn't perform the same as SLI (it performs less, in fact). Anyway, what would you use for SLI?
-
a couple of pages that talk about the topic
Activate SLI mode on unsupported boards - Foro Vagos
Enable SLi on boards that do not support it • MundoBIP.com
http://www.elotrolado.net/hilo_activar-sli-en-placas-no-soportadas_1311382from this, the teachers who think

-
The vagos forum has intrigued me a lot xD although I end up trusting it.
I don't know what to do anymore :nono:
-
This post is being processed/translated. The original version will be shown:
pero ¿ con que quieres hacer el SLI ? vuelvo a preguntar otra vez :D:D
-
This post is being processed/translated. The original version will be shown:
de plantearmelo, sería con otra 260, ya que tengo una

-
This post is being processed/translated. The original version will be shown:
¿ para juegos actuales ? olvídate , dejando de lado que seguirías sin soporte para D11 . 60 que puedes sacar por la tuya y 60 que te dejas en la nueva 120 esto por 125 y sin mirar mucho ( mejor dicho nada ) ASUS. GTX550TI DIRECTCU 1GB GDDR5 192BIT PCIE ::: APPinformatica.com :::
te rinde mas que el SLI tienes D11 menos ruido y drivers mas actuales ¿ que mas quieres?
y si quieres algo un poco mejor http://www.alternate.es/html/product/Tarjetas_graficas_NVIDIA_GeForce_GTX/GIGABYTE/GeForce_GTX_560_OC/557197/
P.D no te pongo ninguna ATI pero podría ser interesante por que podrías montar tu 260 para las físicas ( ojo que solo es compatible con algunas ATI ) -
This post is being processed/translated. The original version will be shown:
Gracias CNCBCN por la explicación, xao al SLI.
La gracia es que cuando me empezaba a decidir por la 560Ti MSI N560GTX-Ti Twin Frozr II/OC: Amazon.es: Electrónicaveo esto:Rumor: Nvidia prepara rebajas navideñas - CHW
me espero a navidad? :muerto:
-
This post is being processed/translated. The original version will be shown:
una buena noticia sin duda :D:D quien sabe puede que incluso yo aproveche y todo, que la 280 ya meda problemas de ruido ( temps ) con el B2 y con el 3 no quiero ni imaginármelo :llorar:
-
This post is being processed/translated. The original version will be shown:
jaja, yo en cuanto tenga mi nueva gráfica (sea cual sea) le doy al 3 :D:D
con los drivers de ati y nvidia conjuntos, se puede configurar bien para que la fiísica la mueva la 260 y quitar totalmente de ese trabajo a la ati?. Siempre he tenido nvidia y tengo curiosidad por cambiar jeje
y por lo que dices de que algunas ati no se pueden, como diferencio las que si, y las que no? -
This post is being processed/translated. The original version will be shown:
yo al 3 empezare a darle el 10 ( cuando cobro ) :D:D:D
sobre las que se puede y las que no e leído por la red que con algunas no se puede ( o es mas complicado ) pero seria cuestión de tirar de SR google :D:D -
This post is being processed/translated. The original version will be shown:
Yo de esas rebajas navideñas no me fiaría ni media, ya que la tendencia en Navidades es subir los precios por la cantidad de compras "obligadas" que hay. Seguramente lo que hagan es subir los precios paulatinamente hasta Navidades para entonces hacer "ofertas", y que se queden los precios como están ahora, o incluso más altos, pero claro… cuestión de márketing

Alomejor me equivoco, pero vamos... no creo, ya que todos los años es la misma historia

Salu2
-
This post is being processed/translated. The original version will be shown:
en nombre de todos : GRACIAS AGUAFIESTAS :D:D:D:D
-
This post is being processed/translated. The original version will be shown:
jajajaja :risitas::risitas::risitas::risitas:
Pues con todos los comentarios y sin más espera, ya he hecho el pedido. Ala, en camino una GTX560Ti
http://www.amazon.es/MSI-N560GTX-Ti-Twin-Frozr-OC/dp/B004K8R8AI/ref=sr_1_1?s=electronics&ie=UTF8&qid=1319904689&sr=1-1
Ese precio de Amazon y con el envío gratis…, no he podido resistirme:mudo:Gracias a todos por sus comentarios, ya les contaré

Saludos
-
This post is being processed/translated. The original version will be shown:
Ya tengo la gráfica en mis manos muahaha. Amazon perfecto, mensajería de UPS super rápido. Pongo foto
:

y con la GTX260 para physx:

Hasta aqui todo bien, ahora vienen los problemas:
Cuando enciendo el pc, lo primero que observo es que el ram utilizable me ha bajado a 2,75 Gb. Tengo pinchados 2x2Gb y el Windows 7 es de 64 bits. :|:|:| Que yo sepa deberia reconocer los 4 Gb, y las dos gráficas tienen memoria dedicada (si no es asi corrijanme).
Entonces se me ha ocurrido quitar la 260, y el ram utilizable sube, ahora tengo 3,37Gb. Cosa que me sigue pareciendo raro, debería tener los 4Gb no? ¿Cómo arreglo esto? :verguen:
Ayuda porfa!:eoh:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse