[Worklog] White Timantti (mITX MoD) ~ Smasher
-
Well, I bring you more progress! The cover of the Slim DVD reader:
Fixing all the parts:
I hope you like it, in a few days I will upload more progress!
Regards! -
you've put a good formón bracket on the board to insert the DVD
be careful when painting the edges because the DM sucks a lot and can swell 
-
CNCBCN, I have the impression that it is MDF with a primer layer, not melamine.
And the edges, with a couple of coats of that same primer and then a finish coat, have no problem.
I agree with you about the handle, which can give way, especially because even when empty it weighs something due to the thickness of the wood used, but with the components mounted, I can't even imagine.
Anyway, the project looks very good.Best regards.
-
They are great this project (I didn't see the post at the time), and I like the progress you bring us, I hope you bring more.
Greetings!!
-
CNCBCN, I get the impression it's MDF with a primer coat, not melamine.
And the edges, with a couple of coats of that same primer and then a finish coat, have no problem.
I agree with you about the handle, which can give way, especially because even when empty it weighs something because of the thickness of the wood used, but with the components mounted, I can't even tell.
Anyway, the project looks very good.Best regards.
Nemo, carpenters are very reluctant to use English Medium-density fibreboard - Wikipedia, the free encyclopedia that's the same as DM = medium density
regarding it not being melamine, look at this Melamine catalog
but the best argument I can give you to prove that it is is that if you cut melamine with a jigsaw, it makes splinters (the melamine chips) and if you look closely at the photos, you'll see lots of splinters, which is why they had to "kill" the edges so drastically
P.D. this wasn't for PCs :D: -
Watercooling arrived!
Stay tuned for updates!
-
I would say it's melamine, looking at the holes it has made in the vertical piece, you can see that the wood inside is lighter and that to the sides it is more yellowish... possible glue inside?
-
changing the subject, what about pin-type fittings? considering that all the equipment is left "in the air", safety fittings would look better http://www.tienda-traxtore.com/tienda/index.php?page=pp_producto.php&md=0&ref=RL0595 mainly because you would have to put metal clamps on the pin-type ones and I don't think that would look very photogenic :nono::nono:
-
mostly because you will have to put metal clamps on the spike ones and I don't think that will look very photogenic :nono::nono:
:nono: the metal clamps don't tighten the tubes well and they usually leak, with those fittings the plastic clamps of old or some that are sold specifically for tying those tubes (they are also plastic) work better.
-
WELL valeeeee you're right, they are too wide. but the safety rods look better, more than any of these things with the pin rods http://www.tienda-traxtore.com/tienda/index.php?page=pp_productos.php&md=1&tbusq=1&codf=524&pagact=1 :D:D
-
BUENO valeeeee tienes razón, son demasiado anchas. pero quedan mas guapos los racords de seguridad,mas que cualquiera de estas cosas con los racords de espiga Abrazaderas, Bridas | TRAXTORE :D:D
donde esten estos…
-
This post is being processed/translated. The original version will be shown:
como se nota donde sobra la pasta unos bistpower a 9.90 la unidad :D:D:D vale que no hay color contra los de 2.90 pero …. estamos hablando de 79,2 contra 23,2 y eso es mucha pasta
-
This post is being processed/translated. The original version will be shown:
como se nota donde sobra la pasta unos bistpower a 9.90 la unidad :D:D:D vale que no hay color contra los de 2.90 pero …. estamos hablando de 79,2 contra 23,2 y eso es mucha pasta
pues ni idea de donde sobra la pasta, yo tengo unos racores de compresion de los normalitos comprados de segunda zarpa a tecnho
-
This post is being processed/translated. The original version will be shown:
pues bien que recomiendas los carillos :D:D
-
This post is being processed/translated. The original version will be shown:
Yo también si se puede comprar buenos racores, pero con los EK de compresión son mas que suficientes y buenos rondan los 4 -5 € ahora si quieres unos de 45º me iría por unos feser o bitspower aunque sean caros, pero se nota los acabados.
-
This post is being processed/translated. The original version will be shown:
Yo también si se puede comprar buenos racores, pero con los EK de compresión son mas que suficientes y buenos rondan los 4 -5 € ahora si quieres unos de 45º me iría por unos feser o bitspower aunque sean caros, pero se nota los acabados.
mi opinión es clara : lo único que cuenta son los acabados internos y de las roscas , el resto son pijotadas :mudo: P.D y la calidad de las juntas toricas
-
This post is being processed/translated. The original version will be shown:
mi opinión es clara : lo único que cuenta son los acabados internos y de las roscas , el resto son pijotadas :mudo: P.D y la calidad de las juntas toricas
los bitspower de 90º le dan mil vueltas a todas las demas marcas en acabados internos, mira este:
-
This post is being processed/translated. The original version will be shown:
Pues eso buenos acabados me refiero eso, en ningún momento he dicho "estética" y los bitspower y feser no son caros por pijadas solo si no, que tienen una calidad y un acabado excelentes.
-
This post is being processed/translated. The original version will be shown:
Bueno después de un tiempo de estudio retomé el proyecto y les dejo unos avances, disculpen la mala calidad de las imágenes, no tengo la cámara buena!
Soporte HDD. Gracias a el señor Magerakis por la idea!
Después eso va masillado.
Power button
Cortando termocontraible, todos de la misma medida.
La victima.
Y faltan los demás cables. En la semana updateo! Saludos!
-
This post is being processed/translated. The original version will be shown:
buen trabajo, cada vez va cogiendo mejor pinta
por cierto, de donde eres?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse