Samsung UE37D6530 Led 3D problem

[sioque]

Good afternoon everyone.
2 days ago I bought a 37" Samsung LED 3D, the thing is that the TV looks wonderful as well as the 3D with an incredible definition, the problem arises when I connect it to the computer, the letters are not totally defined, they look a bit blurred, previously I had an LG also 37" and the image of the PC was perfect.
I have tried all the configurations and I am not convinced by the image for PC.
The connection of the computer is from HDMI (output) to HDMI (TV input), they told me that it could be a fault of the HDMI cable (of poor quality), but if it were so, it would have failed me equally with the LG, which was not the case.
I hope you can help me, because I only have 5 days left to make the return.
Thanks in advance.

[Tecnho]

Hello, do you have an Ati-AMD? Have you tried adjusting the format from the catalyst?

[sioque]

Hello, no, I have an Nvidia GTX580 with the latest drivers, but I don't think it's a driver problem.

[Tecnho]

Hello, I did not say that it is a driver problem, but rather that you try to configure the resolution and adjust the fonts in the graphics program itself.

Best regards.

[Fassou]

@Tecnho:

Hola, no he dicho que sea problema de los drivers, si no que intentes configurar la resolución y ajuste de fuentes en el propio programa de la gráfica.

+1 :sisi:

[sioque]

Hello, the graphic configuration I have is 1920X1080 60Mhz, the same as I had with my previous LG, but no,,, something is wrong, they also just told me that it could be the HDMI cable, but damn, it worked fabulously with the LG...

[Tecnho]

look for the options in your Nvidia panel it's like this and you'll have it next to the toolbar and if not in start/programs etc...

[sioque]

hello again, yes I have already looked into setting up everything related to the Nvidia panel, but for now nothing at all, unless there is something hidden in this panel, I know it from experience.
Now I have also connected the Ps3 to try a Blu-Ray movie, and it also looks a bit strange, it's not with those natural glosses and colors and perfect definition.

[Fassou]

Check if the cable supports at least HDMI 1.3, and test other display modes on the TV (16:9, original, scan, etc...).

Salu2!

[sioque]

I bought an HDMI cable that cost me 40€ with gold-plated plugs and its P…M...., but nothing is the same, I have tried all the configurations I have seen and by chance, but no,,,it is not the same definition as with my old LG or by chance, a lot of 3D, a lot of crap,,,but the definition on the PC leaves much to be desired, I think I will make the return and get another LG in 3D, because this only gives me headaches.

[sioque]

Issue resolved, switched to Panasonic and perfect, thanks to all.