Help oc 9800 gtx xxx from xfx
-
Hello everyone! I'm overclocking my old accelerator and I have the following components
ASRock Z77 Extreme4
Lian Li LanCool PC-K62
Intel Core i5-3570K 3.4Ghz
G.Skill Ripjaws X DDR3 1600 PC3-12800 8GB 2x4GB CL9
cooler master hyper 412scombined with my old stuff which is as follows:
tagan tg500-u33
nvida xfx 9800 gtx xxxit's my first serious overclock... since I got this
I went from a 740 to an 840 core
shaders 1850 to 2084
I raised the memory clock to 1190 (I think it hasn't reached the top because I haven't had an error yet)
I went from a 06 bench of 16937 to 18511GPU temperatures at most with the benches have gone up to 71°C
I've read that it has a maximum working temperature of 105°C so with your blessing I'll try to keep it under 80°C? Should I be worried if I've seen any flashing or continuous until I get an error?
I've tested F1 2011 and it also does some weird things but not in the middle. In high it gives me an average of 60 frames and a minimum of 52Needless to say, advice/suggestions are welcome...
-
Hello! I've been googling and it is known that artifacts appear for three reasons
Lack of voltage (if you put a lot of OC and the temperature is low)
High temperature.
Because the memory or core cannot exceed x speed due to lack of voltage or temperature.
Any idea to be able to discriminate what my problem is?
I always use 3dmark 06 to do the tests
Any idea to get possible artifacts out of it... the 3dmark11?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse