UEFI tutorial suggestion

[Sylver]

Totally agree with everything Nemo has said :sisi:
I'll also tell you that you can be calm when messing around with your BIOS, since if you configure something wrong or put an incorrect value in any section, you can reset it later and return to the factory settings, besides that with the new security systems it is practically impossible to damage a component by messing with the BIOS, the system almost always turns off automatically as soon as something doesn't work as it should
I even think there must be some section of "saved configurations" in your BIOS, so investigate a little and save there the configuration that gives you the best result, to return to it once you have messed around with all possible combinations. But the main thing is what you were saying before, first a basic summary with the sections of the BIOS and the functions, and then you will enter configuration values and other adjustments.

Best regards!

[Franziskaner]

better that I don't mess around too much with the BIOS so that if something happens you can say: dad Sylver told me that nothing would happen ;D I can already imagine the memories melting due to overvoltage
and if I remember correctly the ASRock Z77 Extreme4 doesn't have dual bios so better capdas understand how your bios works and then mess around with everything you want. and we eagerly await that bios tutorial ;D
regards

[capdas]

Ok don't worry... first the theory and then the practice! Xd
when I have a draft who do I send it to?

[Franziskaner]

@capdas:

Ok don't worry… first the theory and then the practice! Xd
when I have a draft who do I send it to?

well I don't know …... let me think :troll:

you post it on motherboards, for example:
draft guide ASRock Z77 Extreme4

when you have it finished you edit the title and you're ready
greetings

because the other option is that you send it to someone to correct it :troll: but no one will be willing as is logical and normal don't you think? ;D
greetings

[capdas]

Ok! We could make an open tutorial like a wiki. No?

[Franziskaner]

when you have the tutorial guide or whatever it may be (you do it with the text editor you have) you paste it into "motherboards", and if something is wrong or incomplete, surely some forum member will comment on it, then you edit the post and that's it.
regards

[Nemo]

As Franziskaner says, first you write it using a text editor and plan where to put the different images etc,..Then you open a new topic in the corresponding category, and paste the text. You upload the images to an image hosting site like . Then you insert the link of each image in the appropriate place and you make previews to check that everything is correct.
If later you have to touch up something, you can always edit the text.

Best regards

[Bm4n]

Jejeje don't kill yourself too much, start putting things here and if something is wrong someone from the forum will tell you, when everything is compiled and you open a new topic like "[Tutorial] UEFI Asrock", keep it up

[Fassou]

Take screenshots of your BIOS, directly from XBitLabs.

Salu2!

[capdas]

Hello! I have already started the tutorial! and my question is whether I have to cite sources or ask for permission or if it is not necessary if I use "my own words"?
and edit… it will take me a while to do it since all this information is very new to me and I have to cross-check the information...

[Sylver]

I think it's not necessary to cite all the sources, this is not university
As long as the information is well compacted and you put some indicative images I think it will be enough.

[cobito]

This post is being processed/translated. The original version will be shown:

@capdas:

Hola! ya he empezado el tutorial! y mi pregunta es que si tengo que citar fuentes o pedir permisos o si no hace falta si uso "mis propias palabras"?
y edito… me costara un poco hacerlo ya que toda esta información es muy nueva para mi y tengo que contrastar la información....

Siempre que no uses textos literales ni imágenes ajenas, no tienes por qué dar permiso de nada. Ese tipo de información es libre. Aunque los autores en los que te hayas basado seguro que agradecen algo de reconocimiento.

[capdas]

This post is being processed/translated. The original version will be shown:

oido cocina!

[Franziskaner]

This post is being processed/translated. The original version will be shown:

siempre y cuando las fuentes sean orientativas , no es necesario , ahora si haces un copy paste o una simple traducción mejor te lo ahorras . por este y por otros foros siempre para algún "listillo" que realiza un "copy paste" o simple traducción y luego le llueven los puntillos ( y no siempre verdes)
saludos

[capdas]

This post is being processed/translated. The original version will be shown:

Ok!!! Nada de copy paste puro… Con eso entiendo que se puede hacer copy /paste mas comentarios?

[Franziskaner]

This post is being processed/translated. The original version will be shown:

@capdas:

Ok!!! Nada de copy paste puro… Con eso entiendo que se puede hacer copy /paste mas comentarios?

no es que no se pueda es que para eso pones la URL y punto . puedes poner datos copiar datos hacer lo que te de la gana pero hacerlo TU , no copiar el curro de otro y pegarlo , por que eso no seria ni tu tutorial ni tu guía ni nada tuyo .

[capdas]

This post is being processed/translated. The original version will be shown:

Ningun problema!

[Franziskaner]

This post is being processed/translated. The original version will be shown:

@capdas:

Ningun problema!

SIN COMENTARIOS

eso es una firma , el resto …...

[Franziskaner]

This post is being processed/translated. The original version will be shown:

hostis parece que a alguien no le gusta The Doors :mudo:
eso o tiene una extraña facilidad para soltar puntos rojos :troll:

[lforos]

This post is being processed/translated. The original version will be shown:

Veamos. Lo mejor es aplicar sentido común a las cosas y suelen ser bastante fáciles. Si algún contenido lo han desarrollado en otro sitio, puedes hacer copy-paste de todo o de parte. Esto último es lo interesante para que solo muestres lo destacable.

Lógicamente, si copias y pegas, siempre se debe poner la fuente por respeto y el link de forma deseable. Si utilizas fuentes pero no copias directamente, es un detalle nombrarlas y si es cosecha propia pues mejor. En una misma review o tutorial o lo que sea puede que utilices las tres cosas.