H100 for my Cabinet?

[gamingpy]

Hello friends of hardlimit, I wanted to ask you a question or rather make a suggestion, because as the title says, I am wanting to mount an H100 to my Gs6500-b Burton case and I don't know if it will fit in it... I can't test it because I haven't bought the H100 yet and I don't want to spend more money on a new case... As you can see, this case has two coolers on top, the question is, will it fit there instead of the ones that come by default, the radiator of the H100 with its respective fans. I've looked at videos on YouTube and I haven't found one that has this model installed in this type of case and honestly, I'm worried that I'll buy it and then it won't fit in there. Any suggestions, guys?

[Fassou]

The Corsair Hydro H100 radiator, according to its official page, measures: 122mm x 275mm x 27mm

Salu2!

[Obione]

H80 / H80i & H100 / H100i Case Compatibility Thread (Page 1 for full listings)

"H100 push-only config fits in a Sentey Burton GS-6500R case with MSI Z68A-GD65 mobo, with heavy modding (lots of extra holes drilled for the top vent)."

[gamingpy]

It's true, I hadn't noticed that, thanks, I'm going to cut a piece of paper with those measurements to try it out :sisi:

[gamingpy]

@Obione:

H80 / H80i & H100 / H100i Case Compatibility Thread (Page 1 for full listings)

"H100 push-only config fits in a Sentey Burton GS-6500R case with MSI Z68A-GD65 mobo, with heavy modding (lots of extra holes drilled for the top vent)."

But if the GS6500-R is the same as the 6500-B I'm referring to the size itself especially in that part at the top where the coolers are, the only difference there is the focus of each one, the 6500-b is blue and the other is red

[gamingpy]

I have decided people I am going to buy it since with the tpc 812 my cpu heats up a lot when it is at 100% load even reaching 80 degrees, considering that my micro does not have any OC configured or anything like that. I have only read that the H100 makes a lot of noise, referring of course to its maximum potential in the water pump.. I hope this improves the temperature a lot, although as I said before it could be because of the common ram memories that produce more heat and exceed the stability of my current cooler.

[gamingpy]

Topic Closed! unfortunately it won't work for you guys, I already tried it with an H100, it will fit but there are connector problems and it won't be able to connect. I just told you so that someone might find this useful

PD. I'm going to buy a Corsair 600t ;D