What do you think?
-
Thanks for the reply Franziskaner.
I'm going to measure everything well and see if it fits. If it doesn't fit by 1 cm or so how could I remove that red cover to change the hard drive location? I can't see any screws or anything :S
By the way the issue of assembling the PC is always handled by my brother but he's going to be traveling for a while and to assemble the graphics card and my power supply I only have one doubt.
When changing the power supply again and connecting everything, in the first photo of the 2 below (there are 3 above and 2 below) that I've posted there's a black cable that goes to the case cover. There are 2 fans there and that cable is the one that powers them. Well that adapter that connects to the fans how can I remove it? I've tried pulling it out by the middle but it's hard and I'm afraid to pull like an animal and mess it up.
Thanks and regards
I'm going to measure everything well and see if it fits. If it doesn't fit by 1 cm or so how could I remove that red cover to change the hard drive location? I can't see any screws or anything :S
as a rule they use rivets, you could use a drill to "eat" the head (they are usually aluminum)
When changing the power supply again and connecting everything, in the first photo of the 2 below (there are 3 above and 2 below) that I've posted there's a black cable that goes to the case cover. There are 2 fans there and that cable is the one that powers them. Well that adapter that connects to the fans how can I remove it? I've tried pulling it out by the middle but it's hard and I'm afraid to pull like an animal and mess it up.
that's a four pin molex, they tend to be a bit hard, don't pull on the cables ;D do the "señorita", reverse and it will come out for sure.
regards
P.D ask anything -
I'm going to measure everything properly and see if it fits. If it doesn't fit by 1 cm or so, how could I remove that red cover to change the hard drive's location? I can't see any screws or anything :S
As a rule, they use rivets. You can use a drill to "eat" the head (they are usually aluminum)
When it comes to changing the power supply again and connecting everything, in the first photo of the 2 below (there are 3 above and 2 below) that I posted, there is a black cable that goes to the case cover. There are 2 fans there and that cable is the one that powers them. So, how can I remove that adapter that connects to the fans? I've tried pulling it out by the middle but it's hard and I'm afraid to pull like an animal and mess it up.
That's a four-pin molex, they usually come out a bit hard, don't pull on the cables ;D do the "Miss" trick, reverse it and it will come out safely.
Regards
P.D. Ask anythingFirst of all, thank you for replying.
Yes, I realized that they do come with rivets (at least the outside part, I couldn't reach the red cover part) Let's see if I remove the graphics card I have now and measure everything properly and comment.
Regarding the molex. The truth is that it is indeed hard but I don't know what you mean by "Miss". I thought that maybe you had to press some kind of trigger or something for it to come out. If you could explain the process better, I would appreciate it.
And another thing about the graphics card, what's your opinion? Since you're helping me, I'd like to know your opinion.
Thank you very much for everything, really, forgive my novice doubts
-
I think if you remove the other cover of the tower, you will see the screws
http://www.hartware.de/review_1451_4.html -
I think if you remove the other cover of the tower, you will see the screws
http://www.hartware.de/review_1451_4.html+1
greetings -
Well in the end you were right.
On the red cover when I opened it on the other side it said "remove for a long card" so it was already prepared for it I removed it and ready any graphics card fits now.
And I also managed to remove the fan, it was a bit tight but it came out well. Thanks for helping me too
By the way which graphics card do you recommend? the sapphire hd 7950 vapor-x or the gigabyte hd 7950?
Thanks for responding, regards!!
-
This post is being processed/translated. The original version will be shown:
Son casi iguales, rendimiento calcado, así que ve a por la que más te guste, la gigabyte está muy bien refrigerada y la vapor-x es algo mas barata.
Saludos
-
This post is being processed/translated. The original version will be shown:
Muchas gracias por responder.
Al final me he decidido por la sapphire hd 7950 vapor-x.La encargé ayer por la tarde y espero que para mañana o pasado me venga como muy tarde.
Sólo tengo una última duda, y es con el proceso de instalación. ¿Qué tengo que hacer?
Tengo que quitar los drivers de mi antigua nvidia no? ¿Que programa uso para ello?
Luego sería quitar la gráfica que tengo e instalar la nueva. Y una vez que la instale, que tengo que hacer? entro en la página de amd y me descargo los últimos drivers? o puedo ir descargando los drivers ya para cuando la tenga?
Gracias por contestar y saludos!!
-
This post is being processed/translated. The original version will be shown:
hola como es diferente marca no creo que tengas ningún problema, pero bueno , sino puedes ir a panel de control/desistalar un programa y eliminas todo lo de Nvidia . sino puedes provar algo asi :
Solve Driver Problems, Fix Crashes - Driver Cleaner
saludos -
This post is being processed/translated. The original version will be shown:
Pero los pasos que he puesto se llevan a cabo así?osea en quitar programas quito todo lo de nvidia pero todavía con la gráfica antigua puesta no? y luego los demás pasos están bien? perdón por mis dudas de noob.
Gracias
-
This post is being processed/translated. The original version will be shown:
-Te vas al panel de control y eliminas los drivers de tu antigua gráfica, se te quedará la resolución muy curiosa.
-Después apagas equipo.
-Sacas gráfica vieja, pones gráfica nueva.
-Arrancas e instalas los drivers nuevos.
-Reinicias y fin.Saludos
-
This post is being processed/translated. The original version will be shown:
Muchas gracias por las instrucciones.
He quitado todos los drivers y efectivamente se me ha puesto una resolucion curiosa.He encajado la nueva gráfica y ahora la resolución sigue siendo la misma y solo me deja un máximo de 1024x760. Estoy haciendolo bien? Ahora que hago? que drivers me descargo? son estos?
http://support.amd.com/us/gpudownload/Pages/index.aspx
Relleno esas casillas y descargo todo lo que me sale?
Y una vez que se descarguen e instalen ya mi ordenador funcionará con la nueva gráfica?
Perdonar por mis dudas esque no quiero estropear algo y quiero saber que voy por el camino correcto.
Un saludo
-
This post is being processed/translated. The original version will be shown:
Si, vas muy bien. Bájate los últimos drivers de AMD para tu sistema operativo y listo.
La última versión es el catalyst 13.1, para que no te confundas.Saludos
-
¡Esta publicación está eliminada! -
This post is being processed/translated. The original version will be shown:
Muchas gracias!!
Efectivamente fue todo bien gracias a Dios y ya estoy disfrutando de este tarjetón.
Por cierto leí por ahí que tiene un botón para activar la segunda bios o algo así. Yo de momento no he pulsado nada porque directamente no sé donde se encuentra ese botón. ¿Es necesario que lo active para jugar a juegos como el bioshock o el crysis 3? he probado algunos como el tomb raider y el far cry 3 y no bajan de 60 fps en ultra pero no sé si debo activarlo o no. Espero que puedan ayudarme
Muchas gracias y saludos
-
This post is being processed/translated. The original version will be shown:
No es necesario, es un "overclock" automático para subir la frecuencia. Como está de serie te irá bien de sobra.
Saludos
-
This post is being processed/translated. The original version will be shown:
Bueno pues muchas gracias a todos dejaré la tarjeta gráfica de momento así que de momento me juega a todo en ultra y ya iré aprendiendo truquitos y eso para mejorarla..
Muchas gracias a todos por ayudarme. Salu2
-
¡Esta publicación está eliminada!
