• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    And now what?

    Programado Fijo Cerrado Movido Hardware
    33 Mensajes 8 Posters 4.0k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • NemoN Desconectado
      Nemo Veteranos HL @Kernel1.0
      Última edición por

      First of all, check the warranty. Because regenerating that can take a few days of repair without being able to touch that computer. So if you don't have a warranty, be patient.

      Best regards

      Mis equipos

      cobitoC Kernel1.0K 2 Respuestas Última respuesta Responder Citar 0
      • cobitoC Desconectado
        cobito Administrador @Nemo
        Última edición por

        Indeed, you will have to dedicate a PC exclusively to that task for a few days. In fact, it is recommended to go through several passes until there are no more "delay" sectors (accessible without problems but with access time higher than expected).

        Toda la actualidad en la portada de Hardlimit
        Mis cacharros

        hlbm signature

        1 Respuesta Última respuesta Responder Citar 0
        • Kernel1.0K Desconectado
          Kernel1.0 Veteranos HL @Nemo
          Última edición por

          @Nemo:

          First of all, check the warranty. Because regenerating that can take a few days of repair without being able to touch that computer. So if you don't have a warranty, be patient.

          Best regards

          Too late, calculating with the first few minutes... about 7 days.

          @cobito. If it finally works, it's not a problem, it's not in a hurry.

          Edit
          Well, in 8 days I'll tell you how it goes ;D.

          Bm4nB 1 Respuesta Última respuesta Responder Citar 0
          • Bm4nB Desconectado
            Bm4n @Kernel1.0
            Última edición por

            If it's any consolation, hard drives in laptops don't last very long, so I would replace it, otherwise you run the risk of losing your data.

            hlbm signature
            ↳ Mis componentes

            Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
            • Kernel1.0K Desconectado
              Kernel1.0 Veteranos HL @Bm4n
              Última edición por

              Come on, we have to be positive, the disk is almost new, it will have twice the hours of use when the program ends that it didn't have before xD.
              18H 25M 51S
              8.82% 26932Mb
              0 bad sectors
              14247 delays
              cobitoC 1 Respuesta Última respuesta Responder Citar 0
              • cobitoC Desconectado
                cobito Administrador @Kernel1.0
                Última edición por

                @Kernel1.0:

                Come on, we have to be positive, the disk is almost new, it will have twice the hours of use when the program ends that it didn't have before xD.
                18H 25M 51S
                8.82% 26932Mb
                0 bad sectors
                14247 delays

                I haven't said it before, but I hope you are running the program in "ms-dos mode" with a bootable CD or USB. If you run it from Windows, the wait will be much longer. I say this because when it starts with the bad sectors, the delays will seem like lightning to you.

                Toda la actualidad en la portada de Hardlimit
                Mis cacharros

                hlbm signature

                Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
                • Kernel1.0K Desconectado
                  Kernel1.0 Veteranos HL @cobito
                  Última edición por

                  ? Don't joke that this can go slower.
                  It's good to know. Yes, I'm transferring it from a cd.

                  Kernel1.0K Bm4nB NemoN 3 Respuestas Última respuesta Responder Citar 0
                  • Kernel1.0K Desconectado
                    Kernel1.0 Veteranos HL @Kernel1.0
                    Última edición por

                    ¡Esta publicación está eliminada!
                    1 Respuesta Última respuesta Responder Citar 0
                    • Bm4nB Desconectado
                      Bm4n @Kernel1.0
                      Última edición por

                      18h in 5 years? I can do that in a day with a laptop :troll:

                      hlbm signature
                      ↳ Mis componentes

                      Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
                      • Kernel1.0K Desconectado
                        Kernel1.0 Veteranos HL @Bm4n
                        Última edición por

                        @Bm4n:

                        18h in 5 years? I do that in a day with a laptop :troll:

                        18 hours in 5 years…. I'm dying :ugly:. if it was used so little, a cybercafe would be a better option.

                        Bm4nB 1 Respuesta Última respuesta Responder Citar 0
                        • Bm4nB Desconectado
                          Bm4n @Kernel1.0
                          Última edición por

                          No, it's just that my mechanical disks in laptops last very little because I give them a lot of shaking (literally full throttle), in a day (or literally a few weeks) I can already have relocated sectors and for sure if I ran the program on a disk with 2 years of use from some laptop I would take more than 18h. Thank goodness that the one I have now uses SSD, because I don't trust disks... as soon as they start having problems they tend to get worse and degrade a lot in performance and if the old 2.5" disks weren't already great, apart from being a danger, they are a despair. Many laptops lose a lot of performance because of the disks.

                          PD. Also it's a good excuse to get a cheap SSD ?

                          hlbm signature
                          ↳ Mis componentes

                          1 Respuesta Última respuesta Responder Citar 0
                          • NemoN Desconectado
                            Nemo Veteranos HL @Kernel1.0
                            Última edición por

                            @Kernel1.0:

                            ? Don't joke that this can go slower.
                            It's good to know. Yes, I'm transferring it from a cd.

                            When you start repairing them you will tell us what it's like to go slow…:wall:
                            Patience. Above all, arm yourself with patience that it's going to be a long time.

                            Best regards

                            Mis equipos

                            Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
                            • Kernel1.0K Desconectado
                              Kernel1.0 Veteranos HL @Nemo
                              Última edición por

                              You are right, an SSD would be the best option, because the hard drives in laptops are extremely slow, and a SSD also lasts longer on battery. This is more out of curiosity to see how it turns out than anything else.

                              97 hours 16 minutes
                              63.69%
                              0 bad sectors
                              55718 delays detected

                              I will keep you updated.

                              Kernel1.0K deeiividD 2 Respuestas Última respuesta Responder Citar 0
                              • Kernel1.0K Desconectado
                                Kernel1.0 Veteranos HL @Kernel1.0
                                Última edición por

                                Up to here we have arrived.

                                cobitoC 1 Respuesta Última respuesta Responder Citar 0
                                • cobitoC Desconectado
                                  cobito Administrador @Kernel1.0
                                  Última edición por

                                  That disk is falling apart. Normally there are certain problem regions, but having practically the whole disk affected indicates some problem with the heads, the mechanics or the electronics that HDD Regenerator won't fix. Or that, or you've used it a lot on the move (in a car, bus, etc.).

                                  Run it several times until all the delays disappear. If you've treated the disk well, with that amount of errors don't use it for important things.

                                  Toda la actualidad en la portada de Hardlimit
                                  Mis cacharros

                                  hlbm signature

                                  Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
                                  • Kernel1.0K Desconectado
                                    Kernel1.0 Veteranos HL @cobito
                                    Última edición por

                                    Come on, the disk "disappearing" and not finishing the process indicates that it's something serious. I don't know the history of the disk since the laptop is not mine, but it's possible that it went on a trip while in operation, which charged part of the disk and left the heads as foxes (that's my theory), so a new disk and off we go.
                                    Look at the summary, at the second bad sector it found and the disk disappeared, it's clear that instead of ones and zeros it found the Mariana Trench version PC. xD

                                    Bm4nB 1 Respuesta Última respuesta Responder Citar 0
                                    • Bm4nB Desconectado
                                      Bm4n @Kernel1.0
                                      Última edición por

                                      On the bright side, it only has two sectors that are incorrect… which is rare with nearly 60,000 delays, it seems to be a mechanical problem. Out of pure curiosity, do you know if that disk has anti-fall protection?

                                      hlbm signature
                                      ↳ Mis componentes

                                      Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
                                      • Kernel1.0K Desconectado
                                        Kernel1.0 Veteranos HL @Bm4n
                                        Última edición por

                                        This post is being processed/translated. The original version will be shown:

                                        ¿2 sectores?:eoh:. Repito, el programa no ha llegado a escanear todo el disco, ni idea si tiene protección o no, si la tiene baya timo ¬¬.

                                        Bm4nB 1 Respuesta Última respuesta Responder Citar 0
                                        • Bm4nB Desconectado
                                          Bm4n @Kernel1.0
                                          Última edición por

                                          This post is being processed/translated. The original version will be shown:

                                          No hombre lo decía ironicamente, el disco esta para el arrastre, lo he mirado y no tiene sensor de caída libre que aunque parezca una tontería te puede salvar un disco. Es posible que se le halla caído el portátil y pasa que los cabezales se dañan con golpes fuertes…

                                          hlbm signature
                                          ↳ Mis componentes

                                          Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
                                          • Kernel1.0K Desconectado
                                            Kernel1.0 Veteranos HL @Bm4n
                                            Última edición por

                                            This post is being processed/translated. The original version will be shown:

                                            A vale, es que no se pillan bien las ironías por Internet, creía que te lo habías mirado mal.
                                            Si, algo así habrá sido por que por horas de uso no va a ser, definitivamente esta camino de convertirse en un original pisapapeles.

                                            Gracias a todos por la ayuda.

                                            cobitoC 1 Respuesta Última respuesta Responder Citar 0
                                            • 1
                                            • 2
                                            • 1 / 2
                                            • First post
                                              Last post

                                            Foreros conectados [Conectados hoy]

                                            0 usuarios activos (0 miembros y 0 invitados).
                                            febesin, pAtO,

                                            Estadísticas de Hardlimit

                                            Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                                            Somos un total de 34.9k miembros registrados.
                                            roymendez ha sido nuestro último fichaje.
                                            El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.