• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Help PC problem "noise"

    Programado Fijo Cerrado Movido Configuraciones completas
    5 Mensajes 3 Posters 1.5k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • K Desconectado
      Kornex
      Última edición por

      Good morning:

      I am writing because something strange is happening to me and I would like to know if someone who knows can help me out.

      I have had this computer since the summer of 2013 (in pieces) and it is starting to fail me, that is, it is slow
      (and it is not a matter of the internet) since on the mobile I have no problem with the 100Mb from ONO (via WiFi when the PC is wired)
      and sometimes it makes a little noise, which I do not know if it is from the fan or the heatsink…

      It turns out that I have it on a platform shaped like a 'U' under my desk and when I accidentally hit it the other day
      it froze.

      The fact is, the PC in question is this:

      ATX tower "Cooler master"
      Intel core i5-3750K 3.4GHz (64 bits)
      ATI Radeon HD 6850
      Asrock z77 pro3
      Cooler Master Hyper 412S
      Corsair Vengeanence 8GB

      I must say that when it has been running for a long time it starts to heat up brutally.
      Does anyone know where I could start to orient myself and start checking?
      I know I do not help much with the data I put, but I would like not to touch anything without knowing.
      Thank you very much.

      1 Respuesta Última respuesta Responder Citar 0
      • Bm4nB Desconectado
        Bm4n
        Última edición por

        If it is caused by a blow, it is most likely that the hard drive or the processor cooler has come loose ?

        hlbm signature
        ↳ Mis componentes

        K 1 Respuesta Última respuesta Responder Citar 0
        • K Desconectado
          Kornex @Bm4n
          Última edición por

          I took the opportunity to disassemble the PC and cleaned it with a soft brush and compressed air.
          I removed the old thermal paste from the processor and the heatsink with paper and alcohol and tightened the screws that were a bit loose.

          For now it seems quiet like at the beginning (just after I installed all the parts)

          It seems to have been solved, well, in a couple of days I will come back to comment on how it is going in case there has been any problem.

          Many thanks Bm4n!

          ClipperC 1 Respuesta Última respuesta Responder Citar 0
          • ClipperC Desconectado
            Clipper @Kornex
            Última edición por

            Hello
            I take it for granted that you have applied new thermal paste to it, right?
            Regards
            P.D it is something very obvious, but I have seen bigger nonsense
            Regards2

            K 1 Respuesta Última respuesta Responder Citar 0
            • K Desconectado
              Kornex @Clipper
              Última edición por

              Of course, man, I went down to the APP on purpose to buy it because they close at 2.
              She told me that the tube that is perfectly closed is good for two uses.

              1 Respuesta Última respuesta Responder Citar 0
              • 1 / 1
              • First post
                Last post

              Foreros conectados [Conectados hoy]

              1 usuarios activos (1 miembros y 0 invitados).
              febesin, pAtO,

              Estadísticas de Hardlimit

              Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
              Somos un total de 34.9k miembros registrados.
              roymendez ha sido nuestro último fichaje.
              El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.