New PC from an old box

[jmsr]

Here I leave some photos of my new modified PC. I have used an old case (so old that it still has the floppy disk drive slot) and made some basic fixes: painted the interior structure blue, the exterior part white, I opened a side window and placed methacrylate, I also made three circular openings on the top protected with grilles, and I installed the following ventilation: two air intake fans (one on the front and another on the bottom) and three air exhaust (one on the back and two on the top, since the third opening is for the power supply). In addition, I have placed several blue leds and a fan controller on the front.
Since attaching photos has many limitations, here I leave the links to be able to see them:

• Front: http://imgur.com/ZzvuJJE
• Top: http://imgur.com/CR6kXvl
• Side: http://imgur.com/BeCIiIC
  By the way, the wiring has not turned out great, so I accept suggestions on this matter.

[Obione]

Use cable ties to group cables and take advantage of the holes in the case for fastening. You can also use the thicker cables to pass the rest behind them and even cable tie them.

Good recycling, if you can't put the heatsink with reverse flow, which blows air up, with a bottom fan.

Best regards and welcome.

[rul3s]

@jmsr:

Here I leave some photos of my new modified PC. I have used an old case (so old that it still has the floppy disk drive slot) and made some basic fixes: painted the interior structure blue, the exterior part white, I opened a side window and put acrylic on it, I also made three circular openings on the top protected with grilles, and I installed the following ventilation: two air intake fans (one on the front and another on the bottom) and three exhaust fans (one on the back and two on the top, since the third opening is for the power supply). In addition, I have placed several blue leds and a fan controller on the front.
As attaching photos has many limitations, here I leave the links to be able to see them:

• Front: http://imgur.com/ZzvuJJE
• Top: http://imgur.com/CR6kXvl
• Side: http://imgur.com/BeCIiIC
  By the way, the wiring didn't turn out great, so I accept suggestions on this.

Well, man, for starting from an old case, you've worked hard, I like how it turned out, only that you dedicated 10% of the time you invested in relocating the cables, it would be 10! As a suggestion, open some holes in the sheet where the board is held and pass them through the back, it will look more tidy.

Regards!

[amd125]

Congratulations, it turned out pretty good.

[Sylver]

Good job, recycling with these finishes is a pleasure

Enjoy it!

Best regards