• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Oc a i7 3820 en x79

    Programado Fijo Cerrado Movido Overclock
    8 Mensajes 3 Posters 2.4k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • J Desconectado
      jonabatero
      Última edición por

      GREETINGS. I HAVE BEEN FINE-TUNING THE OVERCLOCK FOR MONTHS. stability tested x 2 hours in prime95 v2.86 in custom settings ftt1792
      AND IT HAS REMAINED LIKE THIS:

      SOME COMMENTS and opinions are welcome

      1 Respuesta Última respuesta Responder Citar 0
      • J Desconectado
        jonabatero
        Última edición por

        there is a small doubt I think the cpuz has a small defect. it exaggerates the overclock results
        because in reality 1ghz are 1024 mhz
        so if I overclock to 4700mhz in reality I would have 4.58 ghz and not 4.7ghz
        SylverS 1 Respuesta Última respuesta Responder Citar 0
        • SylverS Desconectado
          Sylver Veteranos HL @jonabatero
          Última edición por

          @jonabatero:

          there is a small doubt I think the cpuz has a small defect. it exaggerates the overclock results
          because in reality 1ghz are 1024 mhz
          so if I overclock to 4700mhz in reality I would have 4.58 ghz and not 4.7ghz

          Hello fellow,

          The gigahertz are not like the megabytes, whose equivalence to its previous unit is 1024.

          A gigahertz is a thousand (1000) megahercios just :sisi: therefore the CPUZ does its job well ?

          Regards

          >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
          >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
          >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

          J 1 Respuesta Última respuesta Responder Citar 0
          • J Desconectado
            jonabatero @Sylver
            Última edición por

            . so that's it. the doubt is now dispelled 1ghz=1000mhz.

            on the other hand, what opinions about the overclocking done?

            SylverS 1 Respuesta Última respuesta Responder Citar 0
            • SylverS Desconectado
              Sylver Veteranos HL @jonabatero
              Última edición por

              Well, it doesn't look bad, that temperature is good although I suppose it's not under load. If it has passed the necessary tests to ensure stability and such, congratulations :sisi:

              Regards

              >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
              >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
              >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

              J 1 Respuesta Última respuesta Responder Citar 0
              • J Desconectado
                jonabatero @Sylver
                Última edición por

                Of course, at full load, the temperature is around 66 degrees. What makes me a bit worried is that I had to set the Vcore to 1.385v for it to be stable

                SylverS 1 Respuesta Última respuesta Responder Citar 0
                • SylverS Desconectado
                  Sylver Veteranos HL @jonabatero
                  Última edición por

                  66 degrees is still a good temperature to be at full capacity. The increase in Vcore could slow you down in that sense, but seeing that you don't exceed 70º, you can already run miles happily.

                  Regards

                  >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                  >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                  >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                  amd125A 1 Respuesta Última respuesta Responder Citar 0
                  • amd125A Desconectado
                    amd125 Veteranos HL @Sylver
                    Última edición por

                    Congratulations on the OC, I think it's very good for that micro. You have a micro for a good season. Enjoy that cucumber. ;D

                    PD: If you get bored of the micro and donate it, give me a touch :cry:

                    1 Respuesta Última respuesta Responder Citar 0
                    • 1 / 1
                    • First post
                      Last post

                    Foreros conectados [Conectados hoy]

                    0 usuarios activos (0 miembros y 0 invitados).
                    febesin, pAtO,

                    Estadísticas de Hardlimit

                    Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                    Somos un total de 34.9k miembros registrados.
                    roymendez ha sido nuestro último fichaje.
                    El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.