-
that's why I'm disappointed, ddr4, at 1066?
But hombreee!! In cpu-Z it shows 1066, but since it's ddr (double data rate) the final speed is 2133 Mhz.
Is that the frequency of your DDR 4? 2133 Mhz?
Everything is correct, even you have them in quad channel.
What I don't understand is how little it performs in Wprime.
Run another benchmark program like Intel Burn Test. Let's see how many gigaflops your Micro gives.According to your photo, my Fx 8350 was faster than your I7. That's not normal...
Wanautentico - AMD FX 8350 (Vishera) 4,0@4,3Ghz - 8,359" / 258.719"
-
Sorry, but I think I'll take a look at that x5960x :facepalm:
-
You should put nutella on it to dissipate better
Would you use Nutella as thermal paste for your processor? - Engadget in Spanish -
I finally managed to solve the problem, I have already achieved my purpose in life! haha
Twikzer- i7-5960X 3.0@ 4.2 Ghz - 7,344" / 102.872"
Troll proposal: could someone put the test with four Xeon E7? :troll::troll:
Question: can the intel phy (I think that's how it's spelled) or the nvidia tesla be used in this test?
-
Question: can the intel phy (i think that's how it's spelled) or the nvidia tesla be used in this test?
Well yes, it would be interesting to see what result it gives, just put two tests, with and without, to compare
Sent from my iPad using Tapatalk
-
finally I managed to solve the problem, I have already achieved my purpose in life! haha
Twikzer- i7-5960X 3.0@ 4.2 Ghz - 7,344" / 102.872"
Troll proposal: could someone put the test with four xeon E7? :troll::troll:
Question: can the intel phy (I think that's how it's spelled) or the nvidia tesla, be used in this test?
Isn't 32M a very high time?
-
Isn't 32M a bit high?
It's because of the NB's speed... that OC is misconfigured and there's a bottleneck... it's slower than if it were stock... in fact it's half as fast on the 32M :facepalm:
Intel i7 5960X Haswell-E CPU Review - Overclockers :mudo:
-
It's because of the NB speed... that OC is misconfigured and there's a bottleneck... it's slower than if it were stock... in fact it's half as slow on the 32M one :facepalm:
]ok, I'll look into doing a better OC when I feel like entering the bios, even though it'll already be worth it for this test :V
Edit: by the way, the one in the picture has an OC at 4.6 :V
-
Edit: by the way, the one in the picture has an OC at 4.6 :V
Yes, that screenshot is with OC… there is only one table in the review by default and it is still faster:
In fact, a 4770K which is a quadcore at 3.5Ghz is faster at 32M
At 4.6ghz it is stable OC… for testing they put it at 4.8ghz:
That said, that OC is wrong… check it or leave it by default... sometimes a badly done OC is worse than leaving it by default because either there is some parameter misconfigured or the instability generates failures that are solved by the system's error correction system (by software)... this makes the performance plummet... it's like repeating an addition over and over again until it comes out right (to give an analogy)
-
In fact, a 4770K which is a quadcore at 3.5Ghz is faster in 32M
one thing I don't understand, I started testing with the wprime, and if I put 12 threads, it gives me a better result in the 32M than if I put 16, why? if I put 8 it comes out a little but if I put 16, but only approx 0.100 -
De echo un 4770K que es un quadcore a 3.5Ghz es más rápido en 32M
una cosa que no entiendo, me puse a probar con el wprime, y si le pongo 12 threds, me sale mejor seultado en el de 32M que si le pongo 16, por que? si le pongo 8 sale un poco pero que si le pongo 16, pero solo 0.100 aproxYa te lo he contestado antes
… tu OC está mal echo y para colmo seguramente no es suficientemente estable... pasa con Wprime, con CINEBENCH y con muchos benchmarks... es señal de una mala configuración en Bios o de que el OC es poco estable.En tu caso puede ser que al reducir el numero de hilos de ejecución el CPU se calienta menos y por tanto el OC se resiente menos pero vamos que es tan facil como pasar Prime95, OCCT o el LinX
Personalmente recomiendo LinX pero simpre es mejor empezar con Prime95…OCCT lo bueno es que tiene monitorización de parametros y registra el comportamiento durante el stress test pero el LINPACK que trae no está actualizado a la ultima versión por lo que no exprime Haswell ni Skylake al máximo… una pena porque es un programa muy bueno pero que no se está actualizando. :llorar:
Por resumir... BENCHMARKS CON RESULTADO RARO-> OC MAL HECHO O INESTABLE ;D
Si te pierdes con el tema estabilidad mirate estas guias:
**- Intel Core i7 5960X Extreme Edition S-spec QFRA CPU Overclocking Guide
- OC Guide: bringing Haswell-E to its limits
**
EDITO
ojo.. no se pueden comparar dos versiones distintas:
Pese a ello tus resultados son anómalos.
