-
The heatsink is what it will bring I suppose the micro is an amd am1 the cheapest one I've seen for 38 euros 4 cores 2ghz I have another one in my pc but I don't know if it's worth it.
If I lower the power supply to the bottom it will hit the floor or the table and won't pull air?
Ahh I ruled out the graphics card up there, in the drawing it appears down
The idea is not to make many holes so that the case looks nice.
I don't care about the back.
By the way the whiteboard is great
Sent from my JY-S3 using TapatalkThe power supply pulls air from the bottom…
Are you going to put legs on it or some protectors like those on chairs to raise it between 10 and 15 mm?Edit: The idea may not be to make many holes, but consider the side better than the top, if something spills, gravity will finish it off.
-
Well, if it helps you, you can get ideas like this:
Aerodyne
Level Twelve
You should, before you start, create a 2D design in AutoCAD or at least in SketchUP… something more professional and easier to use is Autodesk Inventor or SolidWorks.
With the latter two, in addition to being able to appreciate the visual aspect it will have, you can generate the manufacturing plans for all the parts.
BONUS: If you need 3D parts for your case, you have the website GRABCAD where you will even find motherboards in maximum detail, sockets, screws, hard drives, etc…
-
Thank you very much for your response
but I think it will take me longer to design it than to make it, let me see if I install the AutoCAD that I used to handle it years ago, let me see if I remember…I have changed my idea, I think I will put the power supply at the top to take advantage of the fan it has and blow the air out, a front intake at the bottom for cold air and the outlet through the power supply, maybe I will make a slot just above the graphics card on the back to help it evacuate air.
let me see if they bring me the plate already so I can start to see how it would look.
-
Here I leave you the pieces to see what you think
Msi am1 motherboard
AMD am1 5350 micro
Tacens mp600 power supply
Gigabyte n610d3 2gb graphics
8 gb HyperX Fury white RAM
256 ssd that I already had from the other pc and 2 tb hdd
Sent from my JY-S3 using Tapatalk -
I don't know what use you're going to give it, but I don't see the point of putting a low-end graphics card like the GT610 when that APU already includes a more than decent graphics card for multimedia use.
A comparison between the APU's graphics card and several low-end ones, although it's on Linux but it serves as a reference:
http://www.phoronix.com/scan.php?page=article&item=amd_am1_discrete&num=1
R Tape loading error, 0:1
-
It's that I have bad experiences with integrated graphics, the PC loses power and it's not for multimedia use, it's for photoshop and office work, no games
Sent from my JY-S3 using Tapatalk
-
Look at the link I posted earlier, you responded so quickly that I didn't have time to finish editing it. Later on the PC I'll look at it better, but it's possible that the GT610 is worse than the integrated one, and more so if the RAM is fast, which is very noticeable in AMD APUs.
R Tape loading error, 0:1
-
Well that's what interests me, if you see that it's better to have more RAM than to buy a graphics card, because I've seen boards that run on power from a laptop transformer and thus eliminate the power supply.
Please look into it for me, I currently have a PC with a 1GB graphics card, 8GB of RAM, and an AMD x4 631 processor, and it runs Photoshop very well.Sent from my JY-S3 using Tapatalk
-
With Photoshop I have many doubts, because I don't know if it makes use of some type of graphic acceleration (OpenCL or Cuda) and if the Athlon 5350 or the Nvidia GT610 can take advantage of it.
What I have been able to see is that in terms of raw power, the Athlon II x4 631 is more powerful (the bench is from the 630 but they are very similar):
CPU Benchmarks - Compare Products on AnandTech
PassMark - CPU Performance Comparison[]=168&cmp[]=2195So you won't improve or improve performance.
If you are still interested in it for the mod, consumption and other things, here it tells you how the performance of the 5350 scales according to the frequency of the RAM, although again in Linux and especially games, which is not what you are looking for but to have a reference:
DDR3 Memory Scaling Performance With AMD's Athlon 5350 - Phoronix
Anyway we are talking about a micro that performs between the Core 2 Duo and Core 2 Quad, with worse performance per core (but having 4 it is better than the Core 2 Duo), much better integrated graphics, lower consumption and more modern platform, like SATA3 to get good use out of SSDs (although I think that AMD chipsets don't come out well compared to Intel) and USB 3.0 among others.
It's up to you to see what demands you have and if you will be satisfied with something less powerful than what you had.
-
You've left me a bit unsure, because I don't know if I'm worse
I suppose the athlon micros are good for this motherboard
Asrock AM1H-ITX - Motherboard (DDR3-SDRAM, DIMM, Serial ATA-600, 4 x USB, DVI-D, VGA) Asrock AM1H-ITX - Motherboard (DDR3-SDRAM, DIMM, Serial ATA-600, 4 x USB, DVI-D, VGA): Amazon.es: Computers
Which would improve performanceSent from my JY-S3 using Tapatalk
-
I was just told that with photoshop and 8gb it works very well
I'm going to put 16 and ssd,
Well and a comment on amazon that it's not even a micro or a motherboard for photoshop
Sent from my JY-S3 using Tapatalk
