Crossfire problem with R9 290x (Solved)

[Lord Asmodai]

There is no way… the program is working fine, but as soon as I try to take a screenshot either through the program or through Windows, the program crashes.
What I have noticed is that when it reaches 94 degrees, it soon drops to 88, goes back up to 94 and then back down to 88, and so on, at regular intervals.
Another thing I have noticed is that the temperature of one graphics card is stable at 40 degrees and the other one is the one that goes up to 94. Is this normal?
Yesterday I tried all the drivers for Windows 10 and Windows 7 and nothing... it always does the same thing.
I have no idea what else it could be.

[Fassou]

Such a difference in temperature between the graphics is not normal, so check the arrangement of the graphics, and if the "hot one" is on top of the other (a photo would help us know how you have it), it is likely that you are blowing hot air on it to "cool" it down and that is why it is not working correctly.

Regards!

[Lord Asmodai]

[Lord Asmodai]

it is not very noticeable, considering that my fingers fit, I would say that there is between 1.5 cm and 1.7 cm between the two graficas.La, the one that gets the hottest is the one on top

[Espinetenbolas]

Well, without a screenshot of Furmark or HWinfo we can't really help you… what I can tell you is that the one at 40ºC isn't working... we would be out of doubts if you could take a screenshot.

By the way, the one above heats up because it's the primary or master and the one that's working.

In any case, try with OCCT to see if it sounds the whistle because that way I can't diagnose anything.

I think a screen shot would be useful if the screenshot issue gives you so many problems… try to take it before it crashes :troll:... in fact, take three: one before the test (everything at rest), one running the test and another just at the moment it crashes. You can even record a video, upload it to Youtube and post it in the forum... it will be by options

It's important as I say to have HWinfo open at all times otherwise we can't know what the hell is going on, or how the hardware is working, the heat dissipated... etc.

Another thing you should try is to test the cards separately... without Crossfire, one at a time with Furmark to see if one crashes or if both do something weird or if the problem is reproduced.

I recommend the application Display Driver Uninstaller to remove and clean all graphics drivers completely and without residues and put the latest version of drivers.

Of course update DirectX… for Furmark it doesn't matter because it's OpenCL but you never know where it might be causing problems.

By the way... have you done all this?

[YOUTUBE-HD]GBHi5JPXfJM[/YOUTUBE-HD]

[Lord Asmodai]

Hello, I've tried it several times, but it just crashes when I want to take a photo or video, right at the exact moment I press the button…
Today I will try again to see if I have any luck.

I tried again the graphics separately and they work perfectly.

The video tutorial you uploaded is the one I watched to know how to do crossfire, the only difference is that after deleting the drivers with programs and features I run the Display Driver Unistaller, with the computer in fault-tolerant mode.
Yesterday I reinstalled the latest drivers and let me play a little bit of The Division, but after a while it crashed.

Could it not be a problem of conflict with something else? The RAM for example. I ask without having any idea, it's desperation hahaha

[Lord Asmodai]

I finally managed to stop it from crashing when taking screenshots, I can't believe it . This is the computer's values at rest This is a screenshot of Furmark halfway through the stress test This is a screenshot of Furmark at the end of the stress test And this is a screenshot of Furmark at the end of the stress test

[Espinetenbolas]

Well the second non-functional GPU … is enabled for Crossfire but it doesn't work... try to enable crossfire for furmark: How to Enable SLI and CrossFire Support for OpenGL Applications Let's see if the whistle sounds.

[Lord Asmodai]

Pues no suena no,jajajaj :wall:

[Lord Asmodai]

Nothing, now I'm trying with Windows 8 drivers, to see if I was lucky, I've also disconnected the frame pacing, which I read could cause problems, and with the Afterburner I've disconnected the ULPS and nothing…

I offer a seafood platter to the one who solves this for me jajajaajaja :cry:

[Lord Asmodai]

I even changed the power supply cables in case the power wasn't reaching it properly

[Espinetenbolas]

My solution… returns the one you bought before the return period expires, justifying that your equipment is not compatible... sell the old one and buy a 980Ti... more powerful in everything, except heat, and without any hassle because Crossfire, SLI, and other crap invented by manufacturers don't configure well.

I think crossfire... for whatever reason, doesn't work well on your equipment, and it's silly to waste time and money trying to get it to work properly.

It may seem like the easy option, but honestly, I think it's the most sensible one and the one that will give you the least problems.

[Lord Asmodai]

Thanks Espinete, the truth is that I can't return it.La I bought the graphics a few months ago, I tried it and left it waiting to have the power supply. Then there's also the fact that as I wanted it for a liquid cooling I also bought the cooling blocks for those cards, which besides the EK blocks have cost me to find because they are discontinued. So if I return it I would lose money

For now I will leave them connected, and in a few days I will fight with them again, to see if there is more luck.

Thanks for everything!!

[Espinetenbolas]

Damn… well in any case you have eBay... you may lose money but you lose more money having something you don't use and that will definitely end up devaluing in a few months when Nvidia and AMD release their new generations with 14nm... half the consumption and double the power... not to mention compatibility with directX12

Believe me in less than a year the whole set of graphics cards and EK blocks that cost you a fortune will not be worth more than 500€ while now you can easily get between 350 and 400€ per card... the blocks apart (add 75-100€ more)... so in total you can recover between 850 and 1000€

That's more than enough to buy yourself a 980Ti and a block... or a Fury X and a block.

That's my most sincere advice because with everything you've tried and seeing the result unfortunately you will never get that Crossfire to work on your computer.

[Fassou]

I also think that the best option is a tactical withdrawal. Sell what you can, and you can already get yourself a nice gift with what they release now in the summer, or you can wait until the end of the year, which is when they will release the artillery.

Salu2!

[Lord Asmodai]

Hello!

At first I can say that I have solved it! :fuckyea:

I have managed to do the 3DMark test and the drivers no longer jump out.
In desperation today I messed around with the BIOS, in my BIOS there is a section for the PCI cards, one of the options was to choose which gen of card I have installed, these were selected automatically, and I left them in GEN2. On the other hand I changed the latency values of the PCI, the factory values come in 32 and I changed it to 128.Al when I tried the 3dMARK I saw that there was an improvement in the operation although the drivers were still jumping, so I kept changing until I left it at 64 and the 3DMARK no longer jumps out.

For now I will continue to test it, to see if I have really solved it.

Thank you very much for giving me a hand!

[Lord Asmodai]

Finally I can put the crossfire score xD

AMD Radeon R9 290X video card benchmark result - Intel Core i7-4770K,MSI Z87-G45 GAMING (MS-7821)