Plate hardware
-
I have a question, the screws that hold the motherboard to the tower must be special or can any be used? I mean, if the screws must have an insulating rubber for the issue of isolating the motherboard and the tower chassis or does that not matter?
-
In the modern ones I don't think you have a problem, but in the old ones, they used a kind of reddish cardboard washers, to isolate the screw head from the plate, and probably also to avoid splintering them with the pressure.
Salu2!
Intel i5 3570k / ASRock Z77 Extreme 4 / G.Skill F3-12800CL9D-8GBRL / Sapphire HD5850 / Samsung HD103UJ / TR TrueSpirit / NZXT Source 210 / OCZ ZS550W
Intel i5 4570 / ASRock H87 Pro 4 / 2x G.Skill F3-14900CL8-4GBXM / Samsung 850 EVO 250Gb + ST1000DM003 + ST2000DM003 + HGST HDS723020BLA642 + Maxtor 6V250F0 / CM Seidon 240M / Zalman MS800 / CM MWE 550
AMD Ryzen 7 1800X / B350 / 2x8GB Samsung DDR4-2400 CL17 / NVIDIA GTX 1070 8GB / SSD 120GB + ST4000DM004 + ST6000DM003 / EVGA Supernova 650 G2 -
In the modern ones I don't think you have a problem, but in the old ones, they used a kind of reddish cardboard washers, to insulate the screw head from the plate, and probably also to avoid splintering them with the pressure.
Salu2!
The plate is from the old ones since as I said I am assembling a basic computer with leftover parts from the oldest ones. And I have the doubt that mounting the plate directly to the case chassis is giving me problems
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse