Super PI Test (The 30 fastest PCs from HardLimit)

[Redesoft]

@incrediboy:

could you take a picture to see what batch that processor has? (the big sticker on the box)

it's under the barcodes and it says something like "BATCH#: A123B456C"

I don't have the box. The thing is that I bought it from alternate in a version that doesn't come with a box. It came in a tiny blue box, without barcodes or anything. The thing you're talking about is also engraved on the processor but of course, you have to have the balls to disassemble that noctua that weighs half a kilo XD.

Is there no way to see it through software?

[incrediboy]

@Redesoft:

It's that I don't have the box. The thing is that I bought it from alternate in a version that doesn't come with a box. It came in a tiny blue box, without bar codes or anything. What you say is also engraved on the processor but of course, you have the balls to disassemble that noctua that weighs half a kilo XD.

Is there no way to see it through software?

noctua? half a kilo?… I find it strange that it weighs so little.

about seeing it through software that I know of it's not possible, you can only know by looking at the box or the ihs (the plate where the thermal paste is applied)

[Redesoft]

@incrediboy:

noctua? medio kilo?… me extraña que pese tan poco.

sobre lo de verlo por software que yo sepa no se puede, solo se puede saber mirando la caja o el ihs(chapita donde se echa la pasta termica)

Realmente no sé cuanto pesa. Solo se que si se me ocurre cerrar la torre eso lleva a 70 grados así que tiene que estar destapada y por otra parte creo que me costó unos 70 euros … que luego he visto por algunas tiendas kits de refrigeración liquida que valen mas o menos lo mismo... si lo llego a saber antes me compro un kit de esos

[Tecnho]

The RL kits are a bit messy, and that 70º something is very wrong there, because with that voltage and being a sandy it can't be, look at that heatsink because you must have it placed incorrectly.

[Redesoft]

That is if I close the box and overclock it and process it for a while, that normal...

I don't care about the frequency it sets, it goes to X45 normally although for the super pi I set it to X48, I can still increase it a little more by playing with the voltage but it becomes tremendously unstable. I think the problem is the memory that is 1333, the same as having it at 1600 wouldn't explode so soon.

[Xevipiu]

@Redesoft:

Bueno. Acabo de registrarme después de haber estado mirando algunos posts sobre overclock. La verdad es que se me da bastante mal porque se me ha pegado el pc 34853974593 veces XD menos mal que estas GB se "resetean" solas.

En fin, ya que estaba he hecho un superpi de mi equipo.

Un saludo a todos XD

**No tiene fé, eso es un BUG, me pasa lo mismo con la MSI en muchas ocaciones, en cambio la M4E marca el real xD

**

[rul3s]

Well, here I am posting my superpi, with which I place myself in second place

Air cooling with a noctua nhu12, and Gskill 1600 cl7 7-8-7-24 memory

Best regards!

[Sylver]

I was smelling it when I saw the other post on "Eating sandya", but I wasn't sure…

Congratulations on the climb!

Best regards

[Xevipiu]

With a little more time, I hope to improve it

[krampak]

Is RL or is that already 1-phase?

Rules, hang me an image with a resolution that I can read xD

[rul3s]

@krampak:

Still RL or is that already 1-phase?

Rules, hang me an image with a resolution I can read xD

Here you go!!

[krampak]

Do you have info on the speed and timings of the memories?

[Xevipiu]

@krampak:

Still RL or is that already 1-phase?

**Ostia, I can't remember if it's the micro that I used under RL or with the LS, in any case put under "Phase" The physical limitation is the same under RL as LS

Ahh, tomorrow I'll pass by your town, I have a road bike outing from Girona to Vallter2000, so I'll definitely stop by your town xDD**

Carrer del Riu Terri to Carrer desconegut - Google Maps

Salut fiera

[krampak]

Well without decent memory and with a somewhat vague CPU I think for now I leave it here xD What voltages do you use in the memory those who go to cas 7-7-7? To me at 8-8-8 it wouldn't start anymore, that is if interleave / bank and 1T are activated, although perhaps the first thing would be to remove 2 modules.. which with 4 has always been more complicated.

[Tecnho]

Another sandy ehh, you're heating up my head, you'll see in the end I end up with a 2600k of those XD.

[_Neptunno_]

@Tecnho:

Another sandy ehh, you're heating up my head, you'll see in the end I end up with a 2600k of those XD.

Lol, the last day you'll see me with one Anyway Krampak was coming from a 775 it was time for a change and more coming from him, with what has been tinkering around these forums hehe.

Greetings!!

[Tecnho]

Well, I'm already looking at z68 motherboards, so I'll probably get one this month and get rid of my precious 920 and XDD set

[Obione]

Overclocking memories have never been very important and in the Sandy they are very little noticeable. Don't worry, we are old enough to not bother with benchmarks :chuckles:

On the other hand, I think you have put a lot of voltage in it, I hope it is not more than to pass a SuperPI. If I were you, I would not go beyond 1.4 in normal mode.

From what I have read, there comes a point when it asks for a lot of voltage or it does not go beyond a certain frequency. I have tested up to 4.5GHz and the demand for voltage is linear. I leave you the OC/Vcore graph I made, along with a table that also has temperatures. As you can see, the temperature does shoot up from 4 and a half but well, we are talking about pretty cool micros, nothing to worry about with a quality/price cooler, not to mention price. What cooler did you put in it?

http://imageshack.us/f/14/12219012.jpg/

[Bm4n]

Watch out krampak, at those speeds you're going to have to play with the rest of the CPU voltages, and then if you disable a couple of cores it will also help.

[Obione]

Cierrtoo, good point. From 4.8, it's time to cheer up PLL but watch out for overvolt eh

To give it a go with memories, VTT can also help, I think it's on Gigabyte for VCCIO.

Editing: My board is very sad with the voltage adjustment. It has Vdroop, I can only touch Vcore/vRAM, I don't have dynamic voltage for micro and the PLL adjustment is an on/off :hangover:

One of these days I'll try the latest BIOS, a user of the MSI GD65 told me it improved the Vdroop.