Super PI Test (The 30 fastest PCs from HardLimit)

[Tecnho]

I reached 4.5 but it was too unstable and very hot, I know I could also reach 4.8 but I couldn't in the end, let's see if my little ones from LGA2011 arrive and when I have it with RL I'll give it a fire to see.

[_Neptunno_]

@Tecnho:

I reached 4.5 but it was too unstable and very hot, I know I could also reach 4.8 but I couldn't in the end, let's see if my little ones from LGA2011 arrive and when I have it with RL I'll give it a fire to see.

Jope, I'll have to hurry up, because when you have a few the LGA2011 + those with the 1550 now there won't be anyone who will get close to your results

I only really notice problems when I suspend the computer at 4.4Ghz, and I really haven't tried many things to see if it breaks somewhere.
Anyway, I wouldn't have it always so high, this is just to test, learn and "scare" myself a little, jajaja.

Did yours get very hot?, but you would have HT activated, which according to what I read with that it raises the temperature a lot more.

Greetings!!

[Nemo]

@_Neptunno_:

Anyway, I'm posting my capture, as I'm happy to say that it's the day of my life that I've done the most OC to a micro, and forgive me for saying that I'm like a flan of emotion :risitas:

And what's cool about that feeling huh?…:p. Be careful Neptunno it's addictive :risitas:

[Obione]

Get off the dark path that hardcore OC brings nothing good :nono:

Now seriously, why do you want to reach extreme levels, to get numbers in a bench? I just play a game in rFactor or Gran Turismo, or better yet, a good competition ;D

I started OCing out of necessity with an AMD64 and a mid-range graphics card that couldn't quite move modern games. Now I've done it to give myself the treat of playing The Witcher 2 at full blast, for now without touching voltages. Maybe I'll get a Silver Arrow and give the micro more juice when I get a good graphics card the day I "need" it to play some demanding game, but always looking for a moderate voltage (I calculate that I would do 4.7 or 4.8 with 1.3V, with the E2180 I marked that same ceiling [+0.1]).

[Tecnho]

Obione we do it because we can and I prefer to do this is a toy and you have to play with it, and even if they burn it I'll upload everything I can, just like you with your games XD.

[jordiqui]

intel corei3 2310M@2100Mhz 798x8// 4GbDDR3 665Mhz 9-9-9-24 vcore 0.760 41,523s Aire

[_Neptunno_]

Well, I've tightened the screws a bit more to shave off a few tenths.
I think I'm starting to find the limits. Both mine due to my little experience and wisdom in these matters, and due to limitations of "something". But I don't know if I'll find it :risitas:

I'll try to look for a guide on OC on the 1366 that can help me a bit.

For now, here's my capture:

i7 920(DO) @ 4.53Ghz HT off : 19.937s

Regards!!

[Tecnho]

You have an MP neptunno to see if it helps you anything, regards.

[Patagonian]

Buenas, dejo el mio:

Sandy Bridge 2500K @ 5.73Ghz 1.64V (104.2x55) 1111Mhz @ 8-10-10-28 (Single Stage) -> 15,141''

[Nemo]

Let's go with the tests of my new laptop:

Intel i5 2430M @ 2400Mhz 798x8 // 4GbDDR3 665Mhz 9-9-9-24 vcore 0.760v 31,497s Air

Best regards

[Tecnho]

Let's see if I can give it more of a beating another time, but I haven't had much time to get used to everything that this board has.

Intel i7 3930k @ 4987Mhz 131 x38// 16gb 2100Mhz 9-11-9 vcore 1.656V 16,728s (Water)

[Javier.45]

Hello, I update the AMD one and also increase the Intel one

1- Javier. Phenom II X6 1090T @ 4,76 Ghz 1'57V (258x18.5) 1030.9 Mhz 6-10-6-20 (RL) -> 34,656''

1- Javier. - Sandy Bridge 2600K @ 5.69Ghz 1.68V (105.4x54) 1124.7Mhz @ 6-10-6-24 (RL) -> 14,594''

[krampak]

What bad luck, you've tied at Intel You say the cooling is liquid, but seeing the temperatures I imagine you use chiller no?

[Javier.45]

@krampak:

What bad luck, you've tied at Intel You say the cooling is liquid, but seeing the temperatures I imagine you use chiller no?

Hello, it's not a normal toilet, it's just that the AMD didn't heat anything, I left a

this is the intel

[krampak]

5-9ºC without chiller? I think the temperature probe is broken Unless the world of RL has changed and I haven't noticed, the micro's temperature can't be lower than the water's, right?

Edit: Now I see that you said "it's not a normal toilet", I'm not sure if you left out a comma because what follows the sentence makes me doubt XD

[Tecnho]

Well I see a normal RL and the temperatures are not bad either Krampak, I with my RL and the 920 at 4ghz it stayed at 38-40º.

[krampak]

the temperatures are not bad either Krampak

The Intel ones are not, but the AMD ones?

[Tecnho]

Holy crap lol, I thought it was Celsius, 9º!!! impossible for water and even if I had 5 radiators, that sensor is broken like they said or try another one to measure, it's impossible to have those temperatures without a chiller.

[Javier.45]

@krampak:

Que mala pata, has empatado en el de Intel

No me di cuenta que empate, bueno acá lo tiro de nuevo gracias

1- Javier. - Sandy Bridge 2600K @ 5.69Ghz 1.68V (105.4x54) 1124.7Mhz @ 6-10-6-24 (RL) -> 14,468''

@Tecnho:

Hostia jajaja, pensé que eran celsius, 9º!!! imposible por agua y aunque tuviese 5 radiadores, está mal esa sonda como te dicen o prueba otro para medir, es imposbile esas temperaturas sin chiller.

Hola no había probado con un Athlon II 250 y tenia las mismas temp, al igual q con otros programas para medir las temp, igual ya lo vendí a ese 1090T era bueno.

[Tecnho]

Pues es una RL normal como ya dije, es imposible esas temperaturas si no usas otras cosas.