[VCore] AMD Athlon64 X2 6000+

[hAyO]

It should also be noted that this graphic card, the GT610, has our arch-enemy TURBOCACHE. For example, in my download PC I have the HD4350, and I had to remove HyperMemory using ATI TRAY TOOLS, because when it was on for a long time and I was doing several things, it would eat up the ram in zero point, so the performance drop also depends on your ram.

When I say TurboCache, even though they don't mention it, it might be in the graphic card. In ATI, you can check it, but in Nvidia I don't remember how it was.

Best regards!

[KelM]

Thanks to everyone for responding
The graphics card is a month or a month and a half old since I bought it, with the same intention of solving the lag that I had but nothing was the same
The thing about running Malwarebytes, cclear,… I already ran them a few times but nothing is the same and I already cleaned it, both the fans, I removed the dust that was on the boards, I changed the thermal paste but I only managed to lower its temperature the lag was still there and I don't know what else to do to make it work if you tell me that with the power supply I would have to go well I will buy it...
TURBOCACHE I don't know what you mean by that sorry ^^

[Sylver]

Well look what I found by chance:
http://es.wikipedia.org/wiki/TurboCache

[hAyO]

I reiterate, you should give us the description of your components:

*Source Al: We already know it's the Xilence XP420W
*CPU: we already know it's the 6000+
*Motherboard: ¿?¿?
*Cooling: ¿?¿?
*Amount of Ram: ¿¿??
*Hard Drive: ¿?¿?
*Graphics Card: GT610

Let's see if the issue was somewhere, because you could also try with 3DMark 2001se or another version, in loop mode for a few hours to see if the system crashes or not.

[Fassou]

@hAyO:

Let's see if it was somewhere in the matter, because you could also try with 3DMark 2001se or another version, in loop mode for a few hours to see if the system crashes or not.

As long as I have that source, I wouldn't risk stressing that equipment :nono:

Salu2!

[KelM]

Okay but I don't think the 8500 gt had that, I changed it for the gt 610 and it's still the same so I think it's not the turbo cache or the card's fault. The motherboard I forgot is m2n-mx se plus (asus).
*Dissipation: uff I don't remember and I don't have the box but it's one of these with 3 irons I'll leave a photo I don't know if it helps but anyway…^^ ImageShack - Online Photo and Video Hosting
*Amount of Ram: 4 ram – 2x2Gb ImageShack - Online Photo and Video Hosting
*Hard Drive: Seagate Barracuda 7200.12 500GB ( I think this Seagate Barracuda 7200.12 500GB SATA3 ST500DM002 Hard Drive)

[KelM]

Well I don't know if I did something wrong ( I apologize if that ;D )
Well if you have to buy a power supply I informed myself a little and one of the most important things is the efficiency and the A it has in the 12V, 12V-1 and 12V-2
With an efficiency of 80% it would be fine but how many A (amperes) of input or output is recommended? 40A or so as a minimum?
Thanks and Regards

[Franziskaner]

I got the typical 500w corsair memory card, I think it cost around 50 bucks

[Fassou]

This post is being processed/translated. The original version will be shown:

Viendo una de las imágenes que pones arriba, me surge una pregunta : los dos módulos de memoria que tienes, ¿son iguales?

Salu2!

PD: Si no sabes como mirarlo, usa el CPU-Z (pestaña SPD)

[KelM]

This post is being processed/translated. The original version will be shown:

Perdona por no responder en tanto tiempo pero al ver que nadie respondia….
Pues como no controlo mucho te dejo las imagenes que valen mas que mil palabras ^^
ImageShack - Online Photo and Video Hosting
ImageShack - Online Photo and Video Hosting

[Fassou]

This post is being processed/translated. The original version will be shown:

Por los pantallazos con los dos SPD, se puede observar que las memorias son casi iguales, así que poniendo un voltaje ligeramente superior a 1,8V (1,82-1,85V), podrías descartar a las memorias como origen del problema.

Salu2!

PD: Cambia esa fuente

[KelM]

This post is being processed/translated. The original version will be shown:

Buenas gracias por responder, en cuanto a la fuente tengo pensado cambiarla esta semana, pero nose… tengo entre elegir:
-Nox Sonar 780W
-OCZ 600W stealthxstream
-Nox Pulsar Serie 650W
Nose cual me recomendais, yo en un principio me quedaria con la OCZ.
Saludos