i5, i7 which model?
-
Indeed, without an Ivy processor there is no native USB 3.0 on the Z77, which I did not mention.
Regarding graphics, I have always been pro-nVidia, but certainly ATI are very strong these days, quite economical and fresh, depending on the model. I would go for a 6870 or similar, I have the 5850 Xtreme and it is a delight.
Regarding the ASRock BIOS, there are already some captures of the UEFI BIOS out there:!
!Saving on the cooler is what I did, it is a good idea to be able to pull through until you save money.
Ah, the best way to save is to get everything on Amazon, I took advantage of the free premium and the truth is that everything arrived in 24 hours for €2.99 shipping and I saved a lot on all the components.Regards
-
Indeed, without an Ivy processor there is no native USB 3.0 on the Z77, which I did not mention.
Regarding the graphics, I have always been pro-nVidia, but certainly the ATI are very strong these days, quite economical and fresh, depending on the model. I would go for a 6870 or similar, I have the 5850 Xtreme and it is a delight.
Regarding the ASRock BIOS, there are already some captures of the UEFI BIOS out there:!
!Saving on the cooler is what I did, it is a good idea to be able to hold out until you save up.
Oh, the best way to save is to get everything on Amazon, I took advantage of the free premium and the truth is that everything arrived in 24 hours for €2.99 shipping and I saved a lot on all the components.Regards
Wait tell me if I don't put an Ivy, will the usb 3.0 stay as 2.0?
The 2600k is Sandy, so that would happen in this case, I think it wouldn't be worth getting this motherboard then no? what do you think? if one of its strong points is 3.0 and it doesn't have to not allow it the proce… you'll tell me XD hahahaRegards!
-
Native means that the Z77 chipset has them integrated, just like the USB 2 ports are integrated. With Sandy, you will have 2 USB 3 ports with an integrated controller on the motherboard, but as an extra addition to the chipset. With an Ivy, you would have 2 native ones from the Z77 chipset and 2 others from the NEC controller (or whichever manufacturer it is) added.
-
No, no, that's not it, if it wasn't a scam it would be xDD
Native USB 3.0 means the absence of additional drivers, that is, once the board is assembled for the first time and the OS is installed, USB 3.0 works at speed 3.0 with any device prepared for USB 3.0 just by connecting it, without needing to install anything else. I don't have native 3.0 because of my processor, nor PCI-Express 3.0 (same thing, I need an Ivy) but with the drivers USB 3.0 works perfectly for me with an external Samsung Story hard drive, and the speed is really noticeable to be honest
The versatility of the board model lies above all in its expansion possibilities. If any of the latest Ivy (or a future batch) significantly improves the temperature issue and start to succeed, you can always make the jump without changing the board, with the added advantage of everything you gain (USB 3.0, PCI-E 3.0...) apart from continuing to have a very wide capacity for overclocking, as I have mentioned a couple of times.
By the way, the integrated audio on this board is also no joke, eh? It's not the same as a good external sound card, but it gives a good fight :sisi:Regards
PD: I just reiterated what Obione said, but I couldn't see his post, I don't know why. Well, it's backed up anyway xD
-
Ok, perfect, so then if my family doesn't prevent me, I'll proceed to buy it XD
One more question, is there much difference between the 2600k and the 2700k?
Greetings!
-
As Obione told you, they are pretty much the same, it just depends on the micro you get and the performance you can get out of it by overclocking it.
Regards
-
like it depends on the micro that I get? I don't understand that :S not all 2700k are the same?
-
This post is being processed/translated. The original version will be shown:
Ningún procesador es igual. A ver, están fabricados igual, con la misma tecnología, mismos materiales, etc… pero luego hay algunos que salen más overclockeros y otros menos. Algunos piden más voltaje al llegar a cierta frecuencia y otros suben una barbaridad sin tocar el voltaje.
Lo que es seguro es que intel te va a garantizar que todos funcionen igual de bien a frecuencia stock y turbo. Ahora, más allá de esa frecuencia, ya es cuestión de suerte y maña el límite hasta donde llegue.Saludos
-
This post is being processed/translated. The original version will be shown:
de cara al O:C cada micro es un mundo . ya claro …. son componentes que se fabrican en serie con unos altos controles de calidad etc etc , pero es lo que hay , no todos suben igual . suerte
saludos -
This post is being processed/translated. The original version will be shown:
Ok muchas gracias por la aclaracion.
La pregunta que os lanze anteriormente del Cross Fire o el SLI? al final que pasa?
SALUDOS!! :DD
-
This post is being processed/translated. The original version will be shown:
Ok muchas gracias por la aclaracion.
La pregunta que os lanze anteriormente del Cross Fire o el SLI? al final que pasa?
SALUDOS!! :DD
pues ….. depende ¿ de que depende ?
mírate esto
saludos -
This post is being processed/translated. The original version will be shown:
Pues que depende de lo subido que tengas el micro y de lo bien que rinda el conjunto en general, más o menos como con los micros, depende de la suerte que tengas (y también de que lo hagas lo mejor posible)
Algún compañero por aquí experimentó un descenso del rendimiento al montar un Crossfire de 5850 y 5850 Xtreme. A priori son compatibles todas las gráficas de una misma serie, por ejemplo 58xx, 66xx, 67xx… pero parece ser que la variación de modelo no ayuda a la hora de obtener buenos resultados en rendimiento final.
La teoría dice que no es necesario, pero en la práctica parece ser mas conveniente que ambas gráficas sean exactamente iguales, o al menos el mismo modelo con frecuencias y capacidades idénticas, para un rendimiento óptimo.PD: La respuesta es que un buen Cross o SLI, bien montado y bien gestionado, aumenta el rendimiento considerablemente, de eso no hay duda.
Saludos
-
This post is being processed/translated. The original version will be shown:
Pues egun entiendo con el link que me pasaste Franziskaner, hacer un cross o sli es tentar a la suerte de que funcione o no fucnione no? jajajajjaja
Yo tenia pensado esto para, en principio, pillar 2 graficas "antiguas" y poder tirar con eso, lo mas que suelo jugar es BT3 y no lo frecuento, yo soy mas lolero ( league of legend ) y adicto a las Dota2 , y para eso no hace falta mucha grafica… es mas dudo si con la integrada en la placa base se podria jugar Full al lol... quien sabe! XD
-
This post is being processed/translated. The original version will be shown:
No . como te dice Sylver, teóricamente con que las gráficas sean de la misma serie basta , pero en la realidad algunos SLI Crossfire dan problemas (microsttutering) funcionar funcionan ,pero algunos juegos están mas optimizados que otros para sacar todo el rendimiento a un SLI Crossfire . No deja de ser un test sintético , pero si miras los resultados de Rules veras ati 5850 O.C = 17076 crossfire 5850 sin O.C 29486 crossfire 5850 con O.C 31085 = a 14009 puntos mas que una sola 5850 con OC . y para finalizar aqui mismo tienes unos cuantos SLI/crossfire y creo que ninguno se queja ;D
saludos -
This post is being processed/translated. The original version will be shown:
Y el microshuttering este, se dan en todas las configuraciones? ( se note mas o menos )
-
This post is being processed/translated. The original version will be shown:
No en todas ni el todos los juegos, tampoco falla tanto, otra cosa es que se aproveche bien. Si no eres muy jugón de querer mover todo a FULL 1080p o funcionar con varios monitores o uno bien caro de mayor resolución, casi mejor que te olvides de multiGPU. Si tienes pela pilla una 670, si miras el rendimiento/precio a lo sumo una 7870.
-
This post is being processed/translated. The original version will be shown:
Ok gracias Obione, si normalmente estoy entre 2 o 3 pantallas, ten en cuenta que cuando haces renderizaciones o diseño, en cada pantalla muestras el detalle que necesitas modificar y necesitas ver como va quedando, es por eso que preguntaba lo de MultiGPU, de todas formas si con 1 puedo manejar 2 monitores (minimo) 1080p seria perfecto.
-
This post is being processed/translated. The original version will be shown:
Con las Nvidia serie 600 y ATI serie 5000 o superior puedes mover 3 monitores, la tercera salida debe ser Displayport pero puedes usar un adaptador activo a DVI.
-
This post is being processed/translated. The original version will be shown:
EDIT: Madre mia, me edito por que me a cosa lo que puse… T__T
Tengo problemas con la grafica, la que me recomendais de 200€ se me sale mucho del presupuesto y no puedo estirar mas, pero par un futuro medio, quizas consiga mas pasta.
Que tal seria pillar la HD 7770 y en un futuro, vender esta y tirarme a por gama mas alta? esta vale 126 y segun tengo entendida es guerrillera
http://www.pccomponentes.com/gigabyte_radeon_hd_7770_oc_1gb_gddr5.html
Ilustrarme
-
This post is being processed/translated. The original version will be shown:
Eso ya es una tarjeta para echar vicios.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse