• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Problems with a RAM slot on the motherboard

    Programado Fijo Cerrado Movido Procesadores, placas base y memorias
    12 Mensajes 3 Posters 8.3k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • A Desconectado
      apocalypse_888
      Última edición por

      Definitive, you were right, the problem is the fourth module in dispute. I have tried the 3 kingstons together in any of the 4 slots, and the computer works perfectly. As soon as I add the fourth module, before it did not start, but now it starts, it reads it as if it were 512 Mb instead of 1Gb, it passes the POST, but the operating system does not start.
      Solution, spending more money to buy a fourth module of Kingston, what a pain. They are not expensive, you can get new ones for 15€, but it annoys me having one that already works…
      I suppose (and I see it more and more evident) that the problem is that, since the board supports a total of 4Gb, and in turn supports modules of up to 2Gb, so it is not a problem of compatibility with the board, but between memories...
      If no one comes up with anything different, I will have to buy another module... goodbye

      SylverS 1 Respuesta Última respuesta Responder Citar 0
      • SylverS Desconectado
        Sylver Veteranos HL @apocalypse_888
        Última edición por

        I suspected it would be that from personal experience, I have already learned the lesson that mixing memories is not a good idea.
        If you are going to buy a new module, try to get one that is identical to the one that is now orphaned (the one you originally had before expanding) because if it is a different voltage model or with a different frequency, you already know what will happen. I almost think it is more advisable to buy a pair that is the same as the one you have recently bought, you ensure full operation and 100% free of instability or failure.
        As for the module you have left over, try to sell it second-hand, so the hassle of buying a new module is less, although selling the two modules I mentioned and putting a new pair is a better option.

        Regards

        >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
        >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
        >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

        A 1 Respuesta Última respuesta Responder Citar 0
        • A Desconectado
          apocalypse_888 @Sylver
          Última edición por

          Thanks for your answers. The three modules I have are identical, Kingston value ram DDR2 667, a pair bought on amazon now, and the third module 3-4 weeks ago at a computer store in my neighborhood. The CPU-Z and Aida64 say that these three modules are identical, only the weeks of manufacture change, for everything else they are the same. What I will do is try to sell this one on ebay, to see if I can get something out of it, and recover as much as possible of what the new module will cost me, which I will buy another from Kingston, obviously. Goodbye! Agur

          SylverS 1 Respuesta Última respuesta Responder Citar 0
          • SylverS Desconectado
            Sylver Veteranos HL @apocalypse_888
            Última edición por

            If that's the case then no problem. Good luck with the sale of the module and you'll let us know how it goes with the new one.

            Regards

            >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
            >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
            >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

            A 1 Respuesta Última respuesta Responder Citar 0
            • A Desconectado
              apocalypse_888 @Sylver
              Última edición por

              A little question...
              Even with 4 GB, XP is supposed to not recognize all the memory. In my computer for example, it only recognizes 3.25 GB. This means that even with 4 GB, only 3.25 GB are usable? That is, if my sister's computer now has 3 GB, I buy a fourth module to have 4 GB and I will only gain 0.25 GB at most, maybe it's not worth it, right? Or am I wrong? Goodbye! And thanks...agur
              FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
              • FranziskanerF Desconectado
                Franziskaner @apocalypse_888
                Última edición por

                correct, you would have to migrate to 64B or to W7
                or I would opt for W7 64B
                regards
                A 1 Respuesta Última respuesta Responder Citar 0
                • A Desconectado
                  apocalypse_888 @Franziskaner
                  Última edición por

                  But, would that fourth ram module be of any use to me? I will use it completely, even if the system only shows that I have added 0.25Gb? Because if not, I leave it as it is... the thing is that with a free slot, there won't be dual channel, of course...
                  SylverS 1 Respuesta Última respuesta Responder Citar 0
                  • SylverS Desconectado
                    Sylver Veteranos HL @apocalypse_888
                    Última edición por

                    It will always be better with 4 than with 3, that goes without saying. If you install a 64-bit OS, in theory it will recognize all the memory and will be functional at its full capacity.

                    Regards

                    >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                    >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                    >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                    A 1 Respuesta Última respuesta Responder Citar 0
                    • A Desconectado
                      apocalypse_888 @Sylver
                      Última edición por

                      Hello!
                      Today the fourth module arrived at home and it is already assembled. The computer started up without any problems, the CPU-Z recognizes the 4 modules of 1Gb perfectly, and the OS shows me 3.25Gb of RAM available, so the problem is solved.
                      I must admit that the computer feels a bit lighter, it takes less time to start up and to shut down, and in general, compared to how it was before (at the very beginning, with only 1Gb of RAM) to how it is now, there is a chasm!
                      It was worth the outlay of money… goodbye, and thank you for your advice! Agur

                      SylverS 1 Respuesta Última respuesta Responder Citar 0
                      • SylverS Desconectado
                        Sylver Veteranos HL @apocalypse_888
                        Última edición por

                        It was to be expected that it would now work perfectly.
                        So enjoy it and take a look around the forum every now and then ?.

                        Best regards

                        >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
                        >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
                        >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

                        1 Respuesta Última respuesta Responder Citar 0

                        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                        With your input, this post could be even better 💗

                        Registrarse Conectarse
                        • 1 / 1
                        • First post
                          Last post

                        Foreros conectados [Conectados hoy]

                        0 usuarios activos (0 miembros y 0 invitados).
                        febesin, pAtO,

                        Estadísticas de Hardlimit

                        Los hardlimitianos han creado un total de 543.6k posts en 62.9k hilos.
                        Somos un total de 34.9k miembros registrados.
                        delkunaguero1 ha sido nuestro último fichaje.
                        El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.