Sound problems

[gamingpy]

Hello as I said before I have the asus rampage iv extreme motherboard that I just assembled recently, well the issue is that the sound on hdmi works perfectly but on the headphones it acts as if it ignores them and does not detect them, I tried the headphones elsewhere to see if it was not the problem and it turned out that it was not, I have already installed the Audio HD Realtek drivers from the motherboard and still it does not recognize it.

What could be the problem or am I forgetting to connect something? This is to clarify that I have already connected the front panel of the case to the motherboard and I have also tried with the rear connection and still it does not work. Please help

[Franziskaner]

and in the OS how do you have it (sound configuration)
regards

[gamingpy]

@Franziskaner:

and in the OS how do you have it (sound configuration)
regards

and by default it has the LCD TV HDMI that I have connected as a monitor, I already tried to change the default configuration to the supposed output with which it should work and it doesn't sound anything or recognize that the headset is connected

[Fassou]

You will have the connector of the front connectors cable incorrectly placed, or they will be of different standards (HD / AC97).

Salu2!

PD: Put the jumpers back on the pins, as they come from the factory and test the rear connector.

[gamingpy]

@Fassou:

You have the connector of the front connectors cable incorrectly placed, or they are of different standards (HD / AC97).

Regards!

P.D.: Put the jumpers back on the pins, as they come from the factory and test the rear connector.

Hello, sorry, which jumpers are you talking about? What I connected was the HD audio pin from the front output to the board, since this board, if I'm not mistaken, only supports that input...

[Franziskaner]

but it is possible that the tower cable is not compatible with the connector of the board as Fassou tells you
regards

[gamingpy]

@Franziskaner:

but it is possible that the tower cable is not compatible with the connector of the board as Fassou tells you
regards

If it is compatible with the cabinet friend. The Cabinet is sentey gs 6500-b and has outputs for AUDIO HD and AC 97

[gamingpy]

Cabinet

Audio/Mic. HD / AC97 Ports

Motherboard

Audio : Realtek ALC898 7.1-Channel High Definition Audio CODEC

[Fassou]

Well, if it supports both, check that you're using the correct connector, and enter the BIOS, in case you have to specify the standard you will use in it, as happens with some motherboards.

Salu2!

PD: In AC97, there are usually two jumpers, bridging the front connection pins, which are removed when you put the front connector.

[gamingpy]

In the setup of the board configuration, HD Audio is set by default. I don't think the motherboard is the problem, nor the headphones or the case, so I don't know what else to think it could be.

For the moment, I am not near my PC, but when I am, I will take a picture of the connection so that the audio connection can be seen better. But it should work on the back if the drivers are installed, but even there they don't recognize it...

[gamingpy]

I still have problems, guys :wall::wall::wall:

[ferelxyx]

if you have HDMI activated, the sound of the equipment does not work, you have to go to Control Panel/sound and put it like this

regards

[gamingpy]

thanks for the print screen friend.

look it only shows me this and cost that the headset is plugged into the cpu

[Franziskaner]

@gamingpy:

thanks for the pren screen friend.

look I only get this and I think the headset is plugged into the CPU

man …. I don't think it's the CPU :troll:
regards

[gamingpy]

@Franziskaner:

hombre …. I don't think so to the CPU :troll:
greetings

sorry I didn't understand your answer hehe

[Fassou]

@Normas:

2.5 Signatures
To facilitate the reading of messages, the format of signatures allowed in our Forums will be as follows:

The format of the Signature must contain only text and be limited to a maximum length of 4 lines at a resolution of 1,280x1,024.
Images cannot be included in Signatures, although BBCode is allowed.
Offensive words or distasteful comments will not be allowed.

[gamingpy]

I would like to know if there is a problem with my images in this moderator topic or did you just put that there as a reminder? Oh, and I am still waiting for your response Ferelxyx

[Franziskaner]

@gamingpy:

I would like to know if there is any problem with my images in this moderator topic or did you just put that as a reminder? Oh and I am still waiting for your response Ferelxyx

read point 2.5
General Rules (updated to 06/08/2009) - HardLimit
regards

[Sylver]

:facepalm::facepalm::facepalm::facepalm:
What Fassou has tried to make you understand is that your signature CAN NOT exceed 4 lines, and currently it has 8…

Asus Rampage IV Extreme
DDR3 1600 MHZ 8GB RAM
ATI HD 7770 Black Edition 1GB
LG 32 LCD
Extra 1TB SATA 3 Hard Drive
Corsair Forge 120GB SSD
Cooler Master TPC 812
Sentey GS-6500 b

All that (which is your signature, in case you still haven't understood it) you must distribute it in 4 lines at most. I even take the trouble to give you an example in case it still doesn't get clear:

Asus Rampage IV Extreme - DDR3 1600 MHZ 8GB RAM
ATI HD 7770 Black Edition 1GB - LG 32 LCD
Extra 1TB SATA 3 Hard Drive - Corsair Forge 120GB SSD
Cooler Master TPC 812 - Sentey GS-6500 b

This way YES Have you understood it?

Regards

[Fassou]

@gamingpy:

I would like to know if there is any problem with my images in this moderator topic or did you just put that as a reminder?

I think it's pretty clear, but it's to remind you that you accepted some rules, and you are breaking the one about the signature. Fix it, or we will have to do it ourselves, and "reward" you for your neglect.

@gamingpy:

Oh and I am still waiting for your response Ferelxyx

That, hurry up to answer, that if not this time you also don't pay for the consultation :facepalm:

Salu2!