[Error] Hanging and turning off USB devices

[Franziskaner]

I doubt the source (because of the fan issue). I have a Valeo II 700 with a Phenom 9950 and a GTX 280, plus a RAID 0 with three disks, and the fan doesn't even spin when I want it to (even when I put the whole system under stress). It's true that some Tacens have been bad, but I would be surprised if the problem came from there.
I would go for the BIOS.
Regards

[krampak]

Have you tried turning off automatic restart to see if any BSOD pops up when it restarts? You can find it in system advanced settings, startup and recovery, settings, "automatically restart".

[instantes]

Franziskaner: At first I was surprised about the fan, but then I read that it is normal for it not to activate.
Krampak: Right now I only have Ubuntu installed and I can't test what you're saying. Anyway, when I had Windows, the system at restart didn't say anything or it showed the menu to boot into failsafe mode.

Thanks to both of you

[Franziskaner]

@instantes:

Franziskaner: At first I was surprised about the fan, but then I read that it's normal that it doesn't activate.

Thanks to both of you

as I was telling you, for my computer to activate the fan I have to go through 4 CPU burn and a graphics stress program and my computer consumes a lot more than yours. In this forum and others it has been commented that some tacens fail which is bad, but I don't think that's your problem (although it's true that when they fail they give overvoltage and it could also be that, check in the bios if you have the option of the voltages 9

regards

[Fassou]

Check that the old HDDs are in good health, but it looks like it's crashing because of that power supply.

Do yourself and your computer a favor, and change the power supply, and don't let it be Tacens <:(

Best regards!

[instantes]

@Fassou:

Check that the old HDDs are in good health, but it seems like it's crashing because of that power supply.

Do yourself and your computer a favor, and change the power supply, and don't get a Tacens <:(

Best regards!

thanks Fassou. The HDDs seem to be fine, at least with Crystal Disk Info the result was good. With Gparted the verification is also positive. I don't know if there is another program more suitable to check it.

In case of changing the power supply, can you recommend me a model that works for my computer and has great reliability?
Thank you very much!

[Franziskaner]

look at the watts you need and choose
Power Supply Corsair sale on offer. Online store good discounts and cheap prices
regards

[Franziskaner]

@Franziskaner:

mira los watios que necesitas y elige
Fuentes Alimentación Corsair venta en oferta. Tienda online buenos descuentos y precios baratos
saludos

es muy genérico pero mas o menos te indica los watios que necesitas mejor poner siempre algo demás para el día de mañana ;D
http://support.asus.com/powersupply.aspx?SLanguage=es-es
saludos

[Sylver]

I would put this power supply to that team: Corsair TX650 V2 650W 80 Plus Bronze SemiFanless CP-9020038-EU Power Supply
Or a similar one… Corsair, OCZ, Silverstone... between 600 and 700W

Best regards

[fjavi]

Maybe it's too late but you should try the EHCI hand-off option in the UEFI, which should be where the USBs are, possibly a device you connect via USB has incompatibility and disables it, put it enabled to see if it works for you.

regards

[killyou]

¡Esta publicación está eliminada!