New project Mountain Mods Ascension
-
I love that Ruru case, in fact I had a "homemade" one, I don't know if you've seen that mod, I'll leave you a link, so you can get ideas and of course any questions about it, you know where to find me. ;).
This was mine BlackM0d
In my opinion it's perfect for RL, I changed mine because an XL-Atx motherboard wouldn't fit, the Big Bang I have. Being homemade, I didn't think about that when I made it and then modifying it was a big job from the base of the motherboard to the entire panel, so I changed it.
I don't plan to miss this mod, I'm signing up...!!!
Regards...
-
I love that Ruru case, in fact I had a "homemade" one, I don't know if you've seen that mod, I'll leave you a link, so you can get ideas and of course any questions about it, you know where to find me. ;).
This was mine BlackM0d
In my opinion it's perfect for RL, I changed mine because an XL-Atx motherboard wouldn't fit, the Big Bang I have. Being homemade, I didn't think about that when I made it and after modifying it I had a big job from the base of the motherboard to the entire panel, so I changed it.
I don't plan to miss this mod, I'm signing up...!!!
Best regards...
Hi Jotole, yesterday I was talking to pakitoesp about the tower, I was going to call you to ask you about it but paco got ahead of me.
I've been talking to several pages to see if they can get it for me somehow, but apparently there's no way. I've contacted Mountain Mods but I haven't had a response from them yet. From what I understand, if I buy it from the official website, between shipping, customs fees and whatever they want, it will be priced exorbitantly.
This morning I was able to talk to a colleague to see if we can make it ourselves, and from what I understand it seems like we can. I'll see if I can get my act together a bit with work and talk to him about making it. My idea is to make the plate where the motherboard goes XL size, and extend it to divide the case into two. Do you still have it?? He told you that because they sell that plate alone, with the option to mount XL.
For now, I'll leave it here when I have any news.
Hugs.
-
Buenas Jotole, ayer estuve hablando con pakitoesp sobre la torre, iba a llamarte para preguntarte sobre ella pero se adelante paco.
He estado hablando con varias paginas haber si de alguna manera me la pueden conseguir, pero al parecer no hay manera. Me he puesto en contacto con Mountain Mods pero aún no tengo respuesta de ellos. Por lo que tengo entendido, si la compro en la pagina oficial entre portes, tasas duana y lo que se le antoje a ellos se pondrá por un precio desorbitado.
Esta mañana he podido hablar con un colega haber si la podemos hacer nosotros, y por lo que me ha dado a entender parece que si. Haber si me deslío un poco con el trabajo y hablo con el para hacerla. Mi idea es hacer la plancha donde va la placa base tamaño XL, y prolongarla para dividir la caja en dos. La tienes aún?? te lo dijo por que venden esa plancha sola, con opción de montar XL.
De momento que tenga noticias nuevas lo dejare aquí.
Un abrazo.
No, no la tengo, pero como si la tuviera, se muy bien donde está ;). Sí hablaste con pakitoesp, el te dará mas detalles de como hacerla, yo solo le hice un restyling. De todas maneras si necesitas una medida exacta de algo dimelo.
Un Abrazo…
-
Many thanks Jotole, I didn't hesitate for a moment, if I need your help I know where to find you ;).
Best regards.
-
Already on the way!!!!!!!
Hope I'm lucky and have it by the end of the.
Best regards.
-
Do you have it in Madrid in 1 day? and now to wait 3 months for the notarial paper, as happened to me with a hard drive that I sent under warranty to Holland, and that I am still waiting for since May.
Customs crap for the Canary Islands. -
Do you have it in Madrid in 1 day? and now to wait 3 months for the notarial paper, as happened to me with a hard drive that I sent under warranty to Holland, and that I am still waiting for since May.
Customs crap for the Canary Islands.Today I got in touch with ups, and they confirmed that tomorrow during the day I will receive it. It is supposed that I have already passed customs. How can they have a package for 3 months because of the notarial paper….. there are not enough notaries XD, you have to take it with patience because if not :wall:.
If everything goes well, it has taken from the USA to Spain 4 days.
Tomorrow we will know for sure.Best regards.
-
I've already received it!!!!!! I haven't opened the box until tonight when I got home.
For those interested, the Tris sli bridge is already available from EVGA and also the controller Aquaero6.Here is the Mountain
I'll leave you the first impressions when I open the contents of the box. I've had a complicated day, so I'll continue tomorrow.!
!
!
Best regards.
-
¡Esta publicación está eliminada! -
And for that price.. do you also have to assemble it yourself?
It's pure envy :troll:
-
And for that price.. do you also have to assemble it yourself?
It's pure envy :troll:
For this price it should come with something more :osvaisacagar: I know they made a mistake and didn't include it in the package XD, I'll have to claim it ;).
I've been assembling the box structure or (skeleton) XD. I haven't put the melamine panels on it so as not to unwrap the plastic in order not to cause any damage, until the end of the assembly. It's an amazing box, super spacious and not to mention the thousands of configurations that can be chosen, both in panels and the filling of it.
I have to make a modification to the legs where the motherboard panel rests, because in one of the side panels, it almost touches and prevents me from putting fans in that panel from the inside of the case, from the outside I could put them but I want to leave everything inside it.
!
!
!
!
!
!
!
!
! A detail from Mountain…..
!
!
!
!
!
!
!
!
!
!
!Now I have to study a little bit how I'm going to place everything...
Regards.
-
The best part is that it allows you to add a couple of extra fans :troll: and they don't even come with them.
I think the best part is that you can build it however you want, and the placement of the plate for those of us who can't stop gaming is the best.
You can fit a phase change with an RL for each component separately and there's still room for the cat. The only thing I could possibly fault it for is the paint, which if it's aluminum it dulls it a bit, but that's just me being extremely picky. -
Por este precio debería de venir con algo mas :osvaisacagar: Sebe que se han equivocado y no me lo han echado con el paquete XD, tendré que reclamarlo ;).
He estado montando la estructura de la caja o (esqueleto) XD. No le he puesto los paneles de metraquilato para no desenvolver el plástico con el fin de no causar ningún daño, hasta el fin del montaje. Es una pasada de caja super espaciosa y por no mencionar las miles de configuraciones que se pueden elegir, tanto en paneles como el llenado de ella.
Tengo que hacerle una modificación a las patas donde apoya el panel de la placa base, debido a que en unos de los paneles de los laterales, se queda casi tocando y me impide poner ventiladores en ese panel por dentro de la caja, por fuera si los podría poner pero quiero dejarlo todo dentro de ella.
!
!
!
!
!
!
!
!
! Un detalle por parte de Mountain…..
!
!
!
!
!
!
!
!
!
!
!Ahora me toca estudiar un poco como voy a colocar todo…...
Saludos.
Simplemente ESPECTACULAR…........... :love::love::love:
Me encanta esa caja, que radiadores le vas a meter??
A disfrutar el montaje.. ;).
-
The best part is that it allows you to add a couple of extra fans :troll: and they don't even come with them.
I think the best part is that you can build it however you want, and the placement of the plate for those of us who are always overclocking is the best.
You can fit a phase change with an RL for each component separately and there's still room for the cat. The only thing I could complain about is the paint, which dulls the aluminum a bit, but that's just me being overly picky.Up to 26 FAN:facepalm: A few extra ones... You see how it is, there's room for the cat, the neighbor's dog, and I still have room to mount the RL.
It's aluminum and it does dull it a bit, but the good thing is that you can take it apart and repaint it, and it looks like new.Just SPECTACULAR... :love::love::love:
I love that case, what radiators are you going to put in it??
Enjoy the build... ;).
I'm also in love with it ;D
I'm looking into the possibility of putting 3 Black ice gt in the front for the GPUs and in the back Black ice sr1 for the CPU-PCB.
This morning I was talking to my friend Gustavo to place an order for all the Racords, tubes, radiators, etc...
I'm going to use 12/10mm acrylic tubing, and there are a few other things I still need to get...
Let's see if they get back to me about everything and I'll keep updating.Best regards.
-
Ami also has me in love ;D
I am looking into the possibility of putting 3 Black ice gt in the front for the GPUS and in the back Black ice sr1 for the CPU-PCB.
This morning I have been talking to friend Gustavo to place an order for all the Racords, tubes, radiators etc…
I will use 12/10mm acrylic tube, and more things that I have pending....
Let's see if they give me an answer to everything and I will keep updating.Best regards.
Good choice, Praimus has got some Black Ice too, and they are wonderful radiators, more expensive than the "normal" ones, but worth every cent….....
And about the choice of the store, what can I say to you ;). I think they are the best professionals of RL, that you can find........!!!
Just know that I follow you............... ;).
A hug...
-
Good choice, Praimus has picked up some Black Ice ones too, and they are a marvel of radiators, more expensive than the "normal" ones, but worth every cent….....
And about the choice of the store, what can I say to you ;). I think they are the best professionals in RL that you can find........!!!
Just know that I follow you............... ;).
A hug...
I have this a bit on hold due to lack of material, specifically the Fitting Bitspower for the acrylic tube. Let's see if materials arrive and I update the thread.
Has Pramius created any thread about the radiators to see them??
What can I say that you don't know about Pcrelic, I had barely dealt with them until now, they have been very attentive and solve any RL query.
Best regards.
-
I have this a bit stalled due to lack of material, specifically for the Fitting Bitspower for the acrylic tube. Let's see if I get materials and I update the thread.
Do you have any thread created by Pramius about the radiators to see them??
I'll tell you what you don't know about Pcrelic, I had barely dealt with them until now, they have been very attentive and solve any query of R.L.
Best regards.
He has one from the tower, let's see if he updates it, I'll give him a little tug of the ear….......xD. Worklog - Caselabs STH10
Don't worry, that's the problem we always have in the Rl's, that we spend ;), the material. But don't worry that Gustavo keeps you up to date with everything that arrives….
A hug.
-
He got one from the tower, let's see if he updates it, I'll give him a little ear pull….......xD. Worklog - Caselabs STH10
Don't worry, that's the problem we always have with Rl's, we spend ;), the material. But don't worry Gustavo keeps you updated on everything that comes in….
A hug.
Ok, thank you very much. I'll go there to see how it's going and ask him about it :wall:.
Best regards.
-
Hello, as you know, I have this stopped due to lack of material, if nothing happens by the end of next week or the beginning of the other one, I hope that some orders will arrive for me.
Thanks to Gustavo from Pcrelic, he has made it easier for me to bend the acrylic tubes. First of all, we need the right tools for it, which consists of a saw, sandpaper and silicone cord 10x12mm, hot air gun. We have to apply oil to it so that it slides, so that we can take them out after bending the tube.
A video from PrimoChilll where they teach us how to do it:
EK tool set: link
Best regards.
-
Hello:
16€ for the bending kit seems like a rip-off to me. If you fill the tube with sand you get the same result, and it's easier to remove. At least that's how I did it.
To cut the tube with a disc very slowly or with a metal saw and that's it.
What they say in the video is to be careful not to give it too much heat because depending on the type of acrylic you can form bubbles and crystallize and break more easily. If it's the extrusion type (XT) it forms bubbles much more easily and with casting unless you overdo it it will never form them.
