DOUBT G.Skill Ripjaws X 1600 2x4GB CL8 timing configuration
-
Good afternoon,
I am new to the forum, to be honest I have found it interesting and after trying several forums I have decided to make this post here to resolve this doubt I have.
I recently bought another motherboard, an Asus M5A99FX Pro R2.0 along with an FX8350, I come from a 965 BE and an Asus M4A88 EVO motherboard without UEFI BIOS.
Well the issue is that the motherboard by default in AUTO does not adjust the memory timings correctly:
I have looked and in the BIOS there is a utility to view the SPD information of the memory:
I have configured the timings as follows:
I would like to configure the parameters I have in AUTO, but I am not very sure what values they should have.
Apart from that I leave you a screenshot of the cpu-z, since it does not show up in ungagged mode and it also does not show the CR at 2T even though it is configured in the BIOS.
Best regards
-
How much RAM problem lately in the forum
-
How much RAM problem lately in the forum
I've tried to configure it as you tell me, but it only puts the parameters 8-8-8-24 2T and the voltage to 1.5v, the rest leaves them in auto too, even the tRC leaves it at 39 instead of 34 and in the cpu-z I still don't see the CR or the DC mode, what could this be, any other program to see if these parameters are well adjusted?
-
If the automatic setup doesn't go exactly as you want, you can set it up manually. In case you don't know what latency is, you can always search the internet, eg.: RAM timings knowledge base.
