Help OC 2500k + GA-Z68AP-D3
-
Hello I'm overclocking my 2500K + GA-Z68AP-D3 but I have some doubts.
I have it at 4.4 the question is that I don't know what values to touch to lower the Vcore because it's very high. I ran prime95 with 1792 for 30 min and everything ok. I have it done with turbo. The Vcore in the bios shows 1,368v in cpu-z 1,356v, but I don't have much idea of what to touch in the bios to lower the Vcore.SCREENSHOTS
!
===
===
===
===
-
Set the CPU Vcore to manual, fixed or dynamic. Look at a guide, you will also have to adjust the multistep load-line to control the drop under load.
-
It's that I can only put it in AUTO, NORMAL or assign it a fixed numbering, and that's why I ask for help because I don't know how.
-
Leave it as default or lower the OC a bit and set it to 1.3 fixed with load-line activated, to see what effective voltage it gives.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse