• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Overclock I5-3570k + Gigabyte Z77X-D3H

    Programado Fijo Cerrado Movido Overclock
    8 Mensajes 5 Posters 2.2k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • sebas1980S Desconectado
      sebas1980
      Última edición por

      Hello fellow forum members, I have overclocked my micro, I have set it to 4.5ghz, but I have managed to stabilize the vcore at 1.47v, I have the load line in extreme mode.
      in normal mode the micro reaches about 50º, with a prime test it can reach temperatures of 100º.

      How do you see it?

      1 Respuesta Última respuesta Responder Citar 0
      • Kernel1.0K Desconectado
        Kernel1.0 Veteranos HL
        Última edición por

        Frito, I see it.
        What heatsink do you have?

        sebas1980S 1 Respuesta Última respuesta Responder Citar 0
        • sebas1980S Desconectado
          sebas1980 @Kernel1.0
          Última edición por

          Tomorrow I'll install a Corsair H75 cooler on it, to see if I can get the temperature down.

          FassouF 1 Respuesta Última respuesta Responder Citar 0
          • FassouF Desconectado
            Fassou MODERADOR @sebas1980
            Última edición por

            For now, I would tell you that the signature should not exceed 4 lines (I see 5), and that the source is not very reliable for such an aggressive OC <:(

            Otherwise, control the cooling because summer is very bad, and I fear that the Corsair H75 is not enough for the TDP watts you want to dissipate :facepalm:

            Regards!

            Intel i5 3570k / ASRock Z77 Extreme 4 / G.Skill F3-12800CL9D-8GBRL / Sapphire HD5850 / Samsung HD103UJ / TR TrueSpirit / NZXT Source 210 / OCZ ZS550W
            Intel i5 4570 / ASRock H87 Pro 4 / 2x G.Skill F3-14900CL8-4GBXM / Samsung 850 EVO 250Gb + ST1000DM003 + ST2000DM003 + HGST HDS723020BLA642 + Maxtor 6V250F0 / CM Seidon 240M / Zalman MS800 / CM MWE 550
            AMD Ryzen 7 1800X / B350 / 2x8GB Samsung DDR4-2400 CL17 / NVIDIA GTX 1070 8GB / SSD 120GB + ST4000DM004 + ST6000DM003 / EVGA Supernova 650 G2

            hlbm signature

            garfieldG 1 Respuesta Última respuesta Responder Citar 0
            • garfieldG Desconectado
              garfield Veteranos HL @Fassou
              Última edición por

              Take off that oc if you don't want to be left without a micro. Overclocking issues. If you keep the micro at such high temperatures and that voltage, one day it will just die, and it will be faster the smaller the manufacturing system is.
              Be careful and lower it now until you at least have the h75, see how low you can go, try the lapping issue on that micro so it settles better and increase it little by little and with the lowest voltage possible.

              hlbm signature

              ObioneO 1 Respuesta Última respuesta Responder Citar 0
              • ObioneO Desconectado
                Obione Veteranos HL @garfield
                Última edición por

                There are people who have one like yours and haven't overclocked it, but for me it far exceeds the sensible limit. Overclock it to 4.2GHz and keep adding multi points to see where the voltage demand kicks in and if the temperatures are acceptable, and get the H75 but already :ffu:

                Fractal Design Define R4 - 4 x Servo Gentle Typhoon - Be Quiet SilentWings USC 140 - BitFenix Formula Gold 550W - Asus Crosshair VI Hero - AMD Ryzen 5 3600 - Thermalright Macho Rev.B - 2x8GB Crucial Ballistix Sport AT 3200 - MSI GTX 1070 Gaming X - Corsair MP510 480GB - Seagate 7200.14 1TB - Yamaha HS 7 ♫ ASUS Xonar DGX ♫ Beyer Dynamic MMX-300 - LG 23MP57VQ-P - Oculus Rift CV1 - Logitech G27 - Zalem V2

                sebas1980S 1 Respuesta Última respuesta Responder Citar 0
                • sebas1980S Desconectado
                  sebas1980 @Obione
                  Última edición por

                  I think it's ready, I've managed to stabilize it at 4200mhz with 1.24 vcore.
                  I've put the corsair h75 on it and with high performance games it doesn't reach 60º

                  Do I push it a bit more?

                  Regards.

                  ObioneO 1 Respuesta Última respuesta Responder Citar 0
                  • ObioneO Desconectado
                    Obione Veteranos HL @sebas1980
                    Última edición por

                    Well, try it at 4.3 but, think about the maximum under stress test. It's not good enough for it to spike but for it to stay at 60 and a bit with a game. Let's see if you're going to start decompressing something big and give it a good warm-up.

                    Fractal Design Define R4 - 4 x Servo Gentle Typhoon - Be Quiet SilentWings USC 140 - BitFenix Formula Gold 550W - Asus Crosshair VI Hero - AMD Ryzen 5 3600 - Thermalright Macho Rev.B - 2x8GB Crucial Ballistix Sport AT 3200 - MSI GTX 1070 Gaming X - Corsair MP510 480GB - Seagate 7200.14 1TB - Yamaha HS 7 ♫ ASUS Xonar DGX ♫ Beyer Dynamic MMX-300 - LG 23MP57VQ-P - Oculus Rift CV1 - Logitech G27 - Zalem V2

                    1 Respuesta Última respuesta Responder Citar 0
                    • 1 / 1
                    • First post
                      Last post

                    Foreros conectados [Conectados hoy]

                    0 usuarios activos (0 miembros y 0 invitados).
                    febesin, pAtO,

                    Estadísticas de Hardlimit

                    Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                    Somos un total de 34.9k miembros registrados.
                    roymendez ha sido nuestro último fichaje.
                    El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.