Right, I should have specified that :wall: Well, you see, the motherboard is a P8H67-M with an i3 at 3.30Ghz. As for the RAM, it's DDR3, 2 modules of 4Gb each, which are currently running at 686.8Mhz. The GPU is a GTX 550 Ti... I don't know if you need any more info, buddy.

The thing is that with the auto tuning of turbo V evo, it has set the multiplier to x33 and the bus to 103. When I enter from DOS to the panel to change, for example, the BUS, I save the changes and restart, but it tells me that the overclock didn't come out right... no matter what value I put on the BUS... so I don't know what to do... well, I have an overclock of 3% and from comments from people around here, there are people who have it up to 50% overclocked without apparent problems and of course, I'm envious ;D

Best regards.

Also, a specific question that I've only found in English and I don't understand very well. I changed the RAM from 9 9 9 24 to 9 9 9 27 on the recommendation of a page. Also, is it correct to increase the voltage to 1.65V? Thanks.