ILLEGAL SUMOUT con 200 de FSB
-
tengo un barton 2600+, en una placa Abit NF7-s 2.0 y unas memorias kingston HyperX 3200 con el BH-5, el caso esta en que por mucho voltaje que ponga, no me tira a 200 de FSB, y el micro esta probado en otra placa base, el prime me da el siquiente error
ILLEGAL SUMOUT Possible hardware failure, consult the readme file
y esto es lo que me pone
If the message "Possible hardware failure, consult the readme file."
appears in the results.txt file, then prime95's error-checking has
detected a problem. After waiting 5 minutes, the program will continue
testing from the last save file.Could it be a software problem? If the error is ILLEGAL SUMOUT, then
there is a good chance that this is a software problem. A device driver
or Vx D may not be saving and restoring FPU state correctly. The good news
is that prime95 recovers very well from ILLEGAL SUMOUT errors. Try seeing
if the problem occurs only when a specific device is active or a specific
program is running.a las memos les he pasado el memtest y todo perfecto, ni un error,
el step del micro es bueno, un AQZFA numero 36 de su serie, y esta comprobado que sube a 2300mhz con 1.7 de Vcore, xo a mi me es imposible incluso con el Vcore a 1.85, como soluciono este error? A device driver
or Vx D may not be saving and restoring FPU state correctlyla bios que tengo instalada es la ultima, la 22
-
Could it be a software problem? If the error is ILLEGAL SUMOUT, then
there is a good chance that this is a software problem. A device driver
or Vx D may not be saving and restoring FPU state correctly. The good news
is that prime95 recovers very well from ILLEGAL SUMOUT errors. Try seeing
if the problem occurs only when a specific device is active or a specific
program is running.Creo que te dice bastante claro que casi seguro que es un problema del software, parece que algun driver te la esta jugando.
O que algun programa que se está ejecutando al mismo tiempo que el prime le está afectando durante su ejecución
-
ya lo comprobe, 3 formateos distintos, tras el format, una vez instalando drivers, otra vez a pelo directamente, y la otra solo con los de la nforce, el resultado… el mismo en los 3 casos, no es ni por drivers ni por software... el problema esta o en las memos o en la placa :S
he probado timmings de 2-2-2-5, 2-2-2-11, 2-3-3-7, 3-3-3-7, amos para todos los gustos (las memos vienen por defecto a 2-2-2-5) y lo max q consigo es que en vez de salir ese error, directamente pete en el 1º calculo con el prime o me de pantallazo azul
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login