Overc en la MSI kt333
-
pues viendo el foro de MSI esto es lo que encontre por si a alguno le sirve de ayuda:
BIOS Settings:
LOAD HIGH PERFORMANCE DEFAULTAdvanced Bios Features:
SMART for harddisk : DISABLED / ENABLED when installing WinXPAdvanced Chipset Features:
PCI Delay Transaction : DISABLEDDRAM Timing Control:
Configure SDRAM Timing by : USER
SDRAM Frequency : HCLK
SDRAM CAS# Latency : 2
Row Precharge Time: 2T
RAS Pulse Width: 5T
RAS to CAS Delay: 2T
SDRAM Bank InterLeave: 4
SDRAM Burst Length: 8QW
SDRAM 1T command: Enabled
Fast Command : UltraAGP Timing Control:
all AUTO, Fast Write ENABLED, Aperture Size : 64MB, Master READ/WRITE and SYNC: DISABLEDPNP/PCI Configuration:
PnP OS: YES
PCI Latency Timer : 128 !!!
PCI IDE Bus Master : ENABLEDFrequency/Voltage Control:
all AUTO
***for KingMax DDR user, DO NOT INCREASE THE RAM VOLTAGE . In fact, TinyBGA perform BETTER in low voltage!!
CPU FSB Clock: 150Mhz
Spread Spectrum : DISABLEDMy Rig is :
AMD AthlonXP1600+ LOCKED (not unlocked!)
Alpha PAL8045U with 46.5cfm Delta fan
MSI KT3 Ultra ARU
256MB KingMax PC2400 DDR300
60GB Maxtor D740x
4MB Trident975 AGP 1x
52x Samsung SC-152B (I can't find any firmware for it!!)
Realtek 8139 NIC
SBLive! Value–----------------------------------------------------------------
I managed to maintain stable at 150Mhz SB resulting 10.5 x 150 = 1575Mhz for my XP1600+. I ran more than 1 hour of DivX 5.0 encoding (CPU 100%) to prove its stability.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse