Admite ddr2



  • quisiera saber si mi placa base GYGABYTE GA-8I915PM admitira ddr2, gracias



  • ¡Esta publicación está eliminada!


  • gracias asercamoyero, me has ahorrado un dinerillo, ppues mañan iba a comprarme una



  • @cherokee:

    gracias asercamoyero, me has ahorrado un dinerillo, ppues mañan iba a comprarme una

    Habia respondido que no, pero luego he visto que si googleando.

    Como no estoy seguro he borrado el post, si quieres saberlo googlea un rato y lo encontraras facilmente, yo ya paso.



  • ok, gracias otra vez, seguire googleando, un ratito mas, y si no encuentro nada, ya te comentare



  • GA-8I915PM Ver 1.1

    Specifications

    Form Factor

    • µATX 24.4 cm x 24.4 cm Form Factor

    CPU Support

    • Socket LGA775
    • Support Intel® Pentium® Hyper - Threading technology with FMB Performance 2005 support
    • Support for an Intel® Pentium® 4 processor in a LGA775 socket with a 800 MHz system bus, 2.8Ghz to 3.8 GHz or higher.
    • Support for an Intel® Celeron® processor in a LGA775 socket with a 533 MHz system bus, 2.8 GHz or higher.

    System Memory

    • Four 184-pin DDR SDRAM DIMM sockets.
    • Serial Presence Detect
    • Support for single-sided or double-sided DIMMs (DDR 333 / DDR400)
    • Support for up to 4 GB system memory
    • Non-ECC RAM (ECC memory will run in non-ECC mode)
    • Single and dual channel mode operation:
      o Single channel mode with single DIMM, non-symmetrical population or non-identical DIMMs
      o Dual channel mode with 2 or 4 identical DIMMs, populated symmetrically

    Core Logic (Chipset)

    • The Intel 915P chipset

    I/O controller:

    • ITE IT8712F-A

    Fire Wire controller

    • The Texas Instrument (TSB43AB23)

    Audio Chipset

    • Intel® High Definition Audio subsystem using the Realtek ALC880 audio codec.

    Ethernet Controller

    • Realtek RTL8100C PCI/Mini-PCI Single-Chip Fast Ethernet Controller
    • Power Management
    • 10 Mbps, 10 Base-T and 100 Mbps 100 Base-TX support

    En negrita marque que lleva DDR400, NO ddr2


Accede para responder
 

Has perdido la conexión. Reconectando a Hardlimit.