Overclock E8400

[fenixer]

Me gustaria saver si esta configuracion que tengo puesta es buena y como podria subirla asta los 4Ghz
Ahora es Estable a 3.6Ghz

Imagen:

Mi Equipo:

OverCLocking Core 2 Duo E8400 3.0 Ghz @ 3.60 Ghz
Mother ASUS P5K Premium
Pasta Termica Artic Silver 5
Cooler Silent Knight II
Memorias Kingston 2x2GB DDR2 800 PC2-6400 (4Gb Total)
Grafica Asus Nvidia Gforce 9800 GT 512
HD 2 x Maxtor Sata 2 500Gb , 1 x Maxtor Sata 2 200Gb (1200Gb Total)
Grabadora 3 x LG sata
Fuente Alimentacion Tacens Valeo II 600W

Configuracion Bios:

1. AdvanceàJunpeFree Configurationà

AI Over Tuner____________________________ (Manual)
CPU Ratio Setting_________________________ (09.0)
FSB Strap To Morth Bridge________________ (400Mhz)
FSB Frecuency ___________________________ (400)
PCIE Frecuency___________________________ (100 )
DRAM Frecuency_________________________ (Auto o DDR2 800Mhz)
DRAM Comande Rate_____________________ (2N)
DRAM Timing Control_____________________ (Manual) 5-5-5-15/5-5-5-28

CPU Voltage______________________________ (1.2500V)
CPU PLL Voltage_________________________ (Auto)
FSB Termination Voltage___________________ (Auto)
DRAM Voltage____________________________ (2.20V)
MB Voltage_______________________________ (1.40V)
SB Voltage________________________________ (1.05V)
Clock Over – Charging Voltage_______________ (Auto)
Load Line Calibration______________________ (DESACTIVADO)
CPU GTL Voltage Reference________________ (Auto)
MB GTL Voltage Reference__________________ (Auto)
CPU Spread Spectrum______________________ (Desactivado)
PCIE Spread Spectrum_____________________ (Desactivado)

2. Advance à CPU Configuration à

CPU Ratio Setting_________________________ (09.0)
C1E Support______________________________ (Desactivado)
Max CPUID Value Limit____________________ (Activado)
Vanderpool Technology_____________________ (Activado)
CPU TM Function_________________________ (Activado)
Execute Disable Bit_________________________ (Activado)