Overc en la MSI kt333

[davish]

pues viendo el foro de MSI esto es lo que encontre por si a alguno le sirve de ayuda:

BIOS Settings:
LOAD HIGH PERFORMANCE DEFAULT

Advanced Bios Features:
SMART for harddisk : DISABLED / ENABLED when installing WinXP

Advanced Chipset Features:
PCI Delay Transaction : DISABLED

DRAM Timing Control:
Configure SDRAM Timing by : USER
SDRAM Frequency : HCLK
SDRAM CAS# Latency : 2
Row Precharge Time: 2T
RAS Pulse Width: 5T
RAS to CAS Delay: 2T
SDRAM Bank InterLeave: 4
SDRAM Burst Length: 8QW
SDRAM 1T command: Enabled
Fast Command : Ultra

AGP Timing Control:
all AUTO, Fast Write ENABLED, Aperture Size : 64MB, Master READ/WRITE and SYNC: DISABLED

PNP/PCI Configuration:
PnP OS: YES
PCI Latency Timer : 128 !!!
PCI IDE Bus Master : ENABLED

Frequency/Voltage Control:
all AUTO
***for KingMax DDR user, DO NOT INCREASE THE RAM VOLTAGE . In fact, TinyBGA perform BETTER in low voltage!!
CPU FSB Clock: 150Mhz
Spread Spectrum : DISABLED

My Rig is :
AMD AthlonXP1600+ LOCKED (not unlocked!)
Alpha PAL8045U with 46.5cfm Delta fan
MSI KT3 Ultra ARU
256MB KingMax PC2400 DDR300
60GB Maxtor D740x
4MB Trident975 AGP 1x
52x Samsung SC-152B (I can't find any firmware for it!!)
Realtek 8139 NIC
SBLive! Value

–----------------------------------------------------------------
I managed to maintain stable at 150Mhz SB resulting 10.5 x 150 = 1575Mhz for my XP1600+. I ran more than 1 hour of DivX 5.0 encoding (CPU 100%) to prove its stability.