• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Problem with ASUS P5W DH Deluxe

    Programado Fijo Cerrado Movido Procesadores, placas base y memorias
    25 Mensajes 5 Posters 5.0k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • C Desconectado
      CNCBCN @CoUgSt
      Última edición por

      I say that if I reset the bios, it will be more than enough (note: first check that your motherboard is compatible with your CPU (when it was released), otherwise you will have to update the bios, as they say)
      my old asus croshair ii had power supply in 24 plus 8 but it could work in 24 plus 4, maybe if you look closely at the wiring of your FA you will find a cable that connects to the 20 and you will have a 24 left ;D
      1 Respuesta Última respuesta Responder Citar 0
      • cobitoC Desconectado
        cobito Administrador @CoUgSt
        Última edición por

        @CoUgSt:

        Well, by firmware I meant bios. You have to download the application to update the bios from the official Asus page, then the latest bios they have released and install it. Although for that you will need an older micro because otherwise you will not be able to start Windows. If it still does not work even with another micro, that motherboard is broken.

        If the system shows no signs of life, it cannot update the BIOS.

        Toda la actualidad en la portada de Hardlimit
        Mis cacharros

        hlbm signature

        P CoUgStC 2 Respuestas Última respuesta Responder Citar 0
        • P Desconectado
          pak-rs4 @cobito
          Última edición por

          @cobito:

          If the system shows no signs of life, it cannot update the BIOS.

          That's what I thought, besides that micro is not new, it's even older than the motherboard, so with a bios reset it should recognize it (I think)
          I repeat about the beep when starting up, it doesn't emit any, not even by removing the memory module, it should sound, right?

          C 1 Respuesta Última respuesta Responder Citar 0
          • C Desconectado
            CNCBCN @pak-rs4
            Última edición por

            Have you located the speaker? Just in case I don't have one and that's why it doesn't beep

            P 1 Respuesta Última respuesta Responder Citar 0
            • P Desconectado
              pak-rs4 @CNCBCN
              Última edición por

              @CNCBCN:

              do you have the speaker located? just in case I don't have it and that's why it doesn't beep

              I asked above, the speaker didn't come in the box, but I don't know if it can be integrated.

              C 1 Respuesta Última respuesta Responder Citar 0
              • C Desconectado
                CNCBCN @pak-rs4
                Última edición por

                it is usually a cylinder about 10 mm in diameter and about 10 mm long with two cables, one red and one black. what is to the right of the intel label (this is soldered) but there are also those that go with a connector.
                Diagnose your PC by the sound of the Speaker ~ Bloggeandolo

                P 1 Respuesta Última respuesta Responder Citar 0
                • P Desconectado
                  pak-rs4 @CNCBCN
                  Última edición por

                  Well, it doesn't have it integrated, I just tried another team's that works and it doesn't say anything.
                  I read about a user from hardh2o who had the same problem but with an e6800 extreme, and by resetting it several times he finally got it to boot, but I've reset it about 250 times and nothing... it boots up, everything starts up and immediately the cpu fan stops, but the graphics and hard drive keep running.:nono:
                  C 1 Respuesta Última respuesta Responder Citar 0
                  • C Desconectado
                    CNCBCN @pak-rs4
                    Última edición por

                    well, within the bad, you have it good ;D like how a "colleague" sold it to you (it reminds me of a certain little song "el coleguita" by LPR

                    ) you either meet at your house or his, and he starts it, and if he says you downloaded it yourself, then you yourself, you have multiple options :D:D the best would be to insert it via the rectal route, with a heat sink and all

                    but I suppose you will reach an agreement / solution without having to resort to violence.
                    P 1 Respuesta Última respuesta Responder Citar 0
                    • P Desconectado
                      pak-rs4 @CNCBCN
                      Última edición por

                      If true? hahaha!! The truth is that the solution I see is that, that he comes back home before Christmas! I was excited about the remote control and stuff but what can we do.
                      Thank you very much for the answers!!

                      incrediboyI 1 Respuesta Última respuesta Responder Citar 0
                      • incrediboyI Desconectado
                        incrediboy Veteranos HL @pak-rs4
                        Última edición por

                        Have you tried to disassemble everything, blow the connectors on the motherboard, clean the contacts on the RAM, graphics... with a cotton swab and alcohol and reassemble it? It wouldn't be the first time that a PC doesn't start up because of a bad contact on something.

                        P 1 Respuesta Última respuesta Responder Citar 0
                        • CoUgStC Desconectado
                          CoUgSt Veteranos HL @cobito
                          Última edición por

                          @cobito:

                          If the system shows no signs of life, it cannot update the BIOS.

                          That's why I say it would need a micro from the previous ones, so that it shows signs of life ?

                          1 Respuesta Última respuesta Responder Citar 0
                          • P Desconectado
                            pak-rs4 @incrediboy
                            Última edición por

                            @incrediboy:

                            has probado a desmontar todo, soplar a los conectores de la placa, limpiar los contactos de ram, grafica… con un bastoncillo y alcohol y volver a montarlo? no seria la primera vez que por un mal contacto de algo no arranca un pc.

                            No lo hice pero la grafica arrancaba y si el problema viniese de la ram tendria que emitir el tipico pitido continuo y no hacia absolutamente nada.

                            C 1 Respuesta Última respuesta Responder Citar 0
                            • C Desconectado
                              CNCBCN @pak-rs4
                              Última edición por

                              I'm not sure if CoUgSt is right, but if he is, you would need an "old" micro to be able to update the bios, it surprises me a little but...

                              CoUgStC 1 Respuesta Última respuesta Responder Citar 0
                              • CoUgStC Desconectado
                                CoUgSt Veteranos HL @CNCBCN
                                Última edición por

                                This post is being processed/translated. The original version will be shown:

                                Hombre sé de lo que hablo básicamente porque tuve una P5W-DH Deluxe. Y para instalar el E2160 me hizo falta actualizar la bios, ya que de serie no admite los micros con 200Mhz de FSB (como ese E4600).

                                Otra cosa es que la placa esté jodida y aún con la bios actualizada no funcione, pero hasta que no la actualices o pruebes con otro micro anterior no sabremos eso 😉

                                P 1 Respuesta Última respuesta Responder Citar 0
                                • P Desconectado
                                  pak-rs4 @CoUgSt
                                  Última edición por

                                  This post is being processed/translated. The original version will be shown:

                                  @CoUgSt:

                                  Hombre sé de lo que hablo básicamente porque tuve una P5W-DH Deluxe. Y para instalar el E2160 me hizo falta actualizar la bios, ya que de serie no admite los micros con 200Mhz de FSB (como ese E4600).

                                  Otra cosa es que la placa esté jodida y aún con la bios actualizada no funcione, pero hasta que no la actualices o pruebes con otro micro anterior no sabremos eso 😉

                                  Lo acabo de desmontar y estaba confundido, es un e4400, aunque practicamente es lo mismo, he entrado en la web de asus y cada micro requiere una version de bios, como puedo saber que version de bios trae la placa? Lo he buscado en los manuales que trae la placa pero no encuentro nada.

                                  C 1 Respuesta Última respuesta Responder Citar 0
                                  • C Desconectado
                                    CNCBCN @pak-rs4
                                    Última edición por

                                    This post is being processed/translated. The original version will be shown:

                                    para ver que versión es necesitas encender el PC lo pone creo que en la propia bios

                                    P 1 Respuesta Última respuesta Responder Citar 0
                                    • P Desconectado
                                      pak-rs4 @CNCBCN
                                      Última edición por

                                      This post is being processed/translated. The original version will be shown:

                                      @CNCBCN:

                                      para ver que versión es necesitas encender el PC lo pone creo que en la propia bios

                                      Si, en la bios pone la version que es, pero estamos en las mismas.
                                      CoUgSt, que micro montaste para poder actualizar?

                                      CoUgStC 1 Respuesta Última respuesta Responder Citar 0
                                      • CoUgStC Desconectado
                                        CoUgSt Veteranos HL @pak-rs4
                                        Última edición por

                                        This post is being processed/translated. The original version will be shown:

                                        @pak-rs4:

                                        Si, en la bios pone la version que es, pero estamos en las mismas.
                                        CoUgSt, que micro montaste para poder actualizar?

                                        Pues tuve que montar el E6420 que tengo ahora en el segundo pc… tendrás que buscar alguno con 266Mhz de fsb.

                                        1 Respuesta Última respuesta Responder Citar 0

                                        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                        With your input, this post could be even better 💗

                                        Registrarse Conectarse
                                        • 1
                                        • 2
                                        • 1 / 2
                                        • First post
                                          Last post

                                        Foreros conectados [Conectados hoy]

                                        0 usuarios activos (0 miembros y 0 invitados).
                                        febesin, pAtO,

                                        Estadísticas de Hardlimit

                                        Los hardlimitianos han creado un total de 543.6k posts en 62.9k hilos.
                                        Somos un total de 34.9k miembros registrados.
                                        delkunaguero1 ha sido nuestro último fichaje.
                                        El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.