Problem with CPU cooler and high profile RAM
-
Try to relax the voltage because you are going too high for 4GHz, in fact I wouldn't go above 1.3. If it continues to have high temperatures, you will have to consider reinstalling.
-
Well, I don't have the PC at hand from work but I'll keep you updated.
I'll try it today without OC to see how it goes. I run stress tests with Linx, and I use CPU-Z and Core temp to check. I must say that this is the first OC I've done... I've studied a lot of tutorials online.
I do remember that the MB temp is about 25ºC, the ambient temperature is about 19ºC. I've seen the HR-02 fan max out at about 1200 and a bit rpm.
The case has 4 auxiliary fans: one at the base next to the power supply that brings in air, another at the front near the HDDs that also brings in air, one at the top next to the RAM that blows air out, and one at the back next to the CPU fan that also blows air out, plus an assistant fan 50x50 on the motherboard.
It's true that the CPU voltage is a bit high when looking at OC reviews, I guess that with that voltage I should be stable at 4.5ghz... the recommended limit for air cooling is 1.4V ~ 1.42V right?
I'll play with offset, etc., to lower it and see how it performs.
I'll do all these tests this weekend and I'll let you know, and yes... CNCBCN, I'll post the photos!! xDD -
Well, I've returned from work, and set the factory settings. Without OC, I've done 1-hour tests with the following results:
IDLE = 34º and FULL = Oscillates from 46º to 52º with core voltage at 1.232V.
Ambient temperature 19ºC and Mb temperature at 27º constant during the tests.
I let myself be advised by experts
-
The fan on the HR-02, do you have it blowing air in or blowing it out near the memos?
It seems strange to me because the latest temperatures are the same as I have with the i7 860 which is much hotter than the sandys.
You might want to reconsider the reinstallation as Obione says, with a quality paste.
Best regards -
in the bios how do you have the fan configured? silent, normal or "full blast" I don't know why you have it on silent and you get those temps for that, at idle I see it a bit high and at full it would be 46, throw in what you have but more … :nono:
-
This post is being processed/translated. The original version will be shown:
El venti lo tengo por Bios a TURBO, le he cambiado la pasta, a mi parecer habia puesto demasiada…
Ahora las temperaturas han mejorado ligeramente...estoy en OC probando a 3,8Ghz, y con temperaturas Idle a 31ºC, full a 56ºC y un Core voltage de 1,272V. Iré poco a poco para encontrar las configs perfectas.
Sigue sin convencerme, a lo mejor me estoy exigiendo demasiado, ya que solamente para jugar va sobradamente y comprobando con el Cpu-Z y Core temp a los juegos con que tiramos, rara vez llega a estar al 70% de carga y con temps de 48ºC.
De todas formas gracias a todos por las recomendaciones, tambien por las que podáis seguir dando. -
This post is being processed/translated. The original version will be shown:
bueno , de momento vas mejorando con OC en idle le has quitado 3 grados en full aumentas ( pero con OC ) mas o menos bien ( falla la temps de full , un poco alta ) como te preguntaba Nemo ¿ el ventilador lo tienes metiendo o sacando aire ?
-
This post is being processed/translated. The original version will be shown:
El del Cpu? sacando… vamos como de serie...
Ignorar lo dicho...metiendo aire, siento la rápida e imprecisa respuesta, es que el pc es de mi hermano y le tengo que llamar para comprobar xD
-
This post is being processed/translated. The original version will be shown:
:D:D:D esos dedos veloces :D:D:D
si tienes un ventilador por casa de 140 ideal y sino de 120 te sirve ( para probar ) puedes ponérselo sacando aire ( tendras un pull push ) y bajaras unos cuantos grados ( tampoco 10 :D:D ) -
This post is being processed/translated. The original version will be shown:
;D Grácias por el consejo, de paso… ¿crees que debería plantearme cambiar la pasta por una en condiciones?
He leido que baja entre 3º y 5º, en concreto he visto:
Artic Silver, Noctua Nt-h1, Ocz Freeze extreme y Scythe Elixer... Paso? o sino por cual os decantariais? -
This post is being processed/translated. The original version will be shown:
Comparativa de 80 pastas térmicas en Benchmarkreviews.com - HardLimit
Comparativa de Pasta Térmica - XbitLabs - HardLimites mas interesante el segundo que el primero
sobre cambiar la pasta térmica …. no se ¿ que tienes ? pasta dentífrica :D:D según lo que tengas puedes ganar algo pero , depende de lo que tengas
-
This post is being processed/translated. The original version will be shown:
Le he puesto la pasta que llevaba el cooler, de compuesto siliconado parece ser, totalmente blanca.
Por cierto, he leido acerca de como orientar el Cpu Fan, muchos recomiendan orientar "el que mete aire" en la parte trasera, junto al fan trasero de la torre, y no como sale en muchas reviews, es decir, donde estan las rams, ya que en esa zona, si vas por aire, chupa aire caliente de Ram y Vga.
Puede haber una diferencia de 5ºC!!! :verguen: alguien ha probado esa configuración?
CNCBCN te puedo decir que me han recomendado mucho el Push&Pull pero…putada del HR-02, es que incluye un set de clips para un solo Fan, y al ser genéricos, no se de donde podria sacar otros para el otro fan...:nono: -
This post is being processed/translated. The original version will be shown:
si es una chill factor III pocas cosas mejores podrás encontrar , con la nanoxia ganarías 1,6 grados pero es cara de cojones ( precio * gramo ) y no merece la pena si te pasas el día desmontando el disipador . ahora si tienes una cosa rara puedes comprarte algo mejor tipo chil o artic mx
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Registrarse Conectarse