( breakdown ) Computer turns on, and in a few seconds it turns off

[Sylver]

@Cid111:

Wow, great job! XD Discarded… with a clip XDD that's good XD

ok, I'll check it tomorrow, but since it was screwed in, I'm surprised it would have looked bad (if not, I wouldn't have been able to screw it in, right?), although just in case I've been stingy with the paste, I'll put a little more. Tomorrow I'll tell you more

It's a simple but effective testing method

The thing is that some heatsinks can be confusing when mounting them, I'll put here a proof of it so you can understand:

It depends on the processor, but this happened in this same forum and in that case the processor reached 87º, in another it could have burned or not started at all, although with all the safety systems that processors and motherboards have now, it's almost impossible for them to burn.

Best regards!

[Cid111]

Well you give me a joy with the fact that they can't be burned

Tomorrow I'll try to upload a photo, to see if I'm a bit animal with the screwing, and another with my scythe mugen paw that has a touch similar to the one you've shown me in the photo, the anchorage is very different to my regret.

[Cid111]

Hello!

I have already installed the heatsink and mounted my new motherboard and processor, it's going very well at first, I put the injured pin down so that the weight of the heatsink pushes it, and it's working very well, according to the bios it's at 50 degrees +/- I think it's a good temperature but I'm a bit lost with that. I installed everest.. but I don't like it and the 3dmark.. it doesn't tell me what I want.. but well that's another post.

Here I wanted to thank you for your help

P.D: The other pc.. I think it's dead, before it would turn on and off and now it just turns off… anyway...

[Sylver]

I see that temperature as being a bit high for being measured at rest… Try Core Temp, which is a program that shows the temperature of all the cores.

Did you apply the thermal paste and everything correctly, didn't you?

Best regards!

[Cid111]

@Sylver:

I see that temperature as a bit high to be measured at rest… Try Core Temp, which is a program that shows the temperature of all the cores.

Did you apply the thermal paste and everything correctly, didn't you?

Best regards!

Well, I'll look into it tonight, I'm in class right now, it's crazy that such an expensive heatsink doesn't work… yes, I put the paste on it, it's white like the one that came with the core, I've been looking and there are several types of paste :S

It's quite a world..

[Sylver]

Yes, it's a whole world... that's where the business is for manufacturers, and it's not for nothing, but because there are many types of customers.

I very much doubt that this heatsink won't work, because with this type of heatsinks, just by placing them correctly on the processor with a little bit of well-applied paste, even without a fan, they already dissipate a high percentage of the heat, which makes me think that something is not properly mounted there or that there may be a problem with the sensor. When you install Core Temp we will check it.

Regards

[Cid111]

Temperature readings:

¿ Power 11.8 Watts? Solo?
¿ Que is Tj.Max? 98ºC

Core 0: 36ºC
Core 1: 33 ºC
Core 2: 36 ºC
Core 3: 33 ºC

-> These data with 8 hours of being on with little activity, I think it's great.
But I don't control temperature statistics, but let's say that 36 is my body temperature and I don't melt silicon XD

Great program Core temp, thanks

[Sylver]

Friend, that's much better, 50ºC was not very normal at rest that we can say…
Indeed, those temperatures are very good :sisi:

And the TJ Max is the temperature limit that the processor can withstand without suffering damage

Best regards!

[Cid111]

@Sylver:

Friend, that's much better, 50ºC was not very normal at rest that we can say…
Indeed, those temperatures are very good :sisi:

And TJ Max is the temperature limit that the processor can withstand without suffering damage

Greetings!

okay, thank you very much, so the pc is ready for now. I'll wait for the graphics to go down and in the meantime, I'll play

Hugs!

[Sylver]

@Cid111:

vale, muchas gracias, entonces pc listo por ahora. Esperare a que bajen las graficas y mientras a jugar

Un abrazo!

Me alegro de que ya esté listo y todo correcto, y se agradece el regreso para comentarlo una vez resuelto :sisi:
Ahora a disfrutar de tu equipo y para cualquier cosa ya sabes por donde pasarte

¡Un saludo!