I need a micro atx case, cheap pc

[Sylver]

Man, if you do the "thermal toothpaste" trick in a tiny, tiny amount... we won't say anything, and at least you try it today, tomorrow you'll buy the good toothpaste... :ugly:

Nah, it's better to do it right from the beginning, I'm with you... The thermal toothpaste thing is a pain :wall:

Regards

[Gaiteiro]

Haha toothpaste!!!

If the main issue is the heatsink, I once assembled everything and left the micro and the heatsink for last, then it turned out that the tabs (the ones that go into the 4 holes of the board) didn't fit well and I had to disassemble everything to access the back of the board and make the job easier :facepalm:

Nah, there's no rush as it's for Christmas, but I already had a plan and now it's time for a movie, I have "The Bourne Legacy" on hold here, or maybe I'll waste time watching nonsense on youtube :alone:
Regards.

[Sylver]

@Gaiteiro:

Na, that there's no rush that it's for Reyes, but I already had a plan and now it's time for a movie, I have "The Bourne Legacy" here to watch, or maybe I'll waste time watching nonsense on youtube :alone:
Regards.

Jajajaja +1, besides it's true, it always happens… I have my average stuck at 2:00 AM... I can't watch the movie before that, I get tangled up looking for synopses, trailers, nonsense... How evil the internet is in innocent hands... :alone:
xD

[Tecnho]

@Gaiteiro:

Jajaja pasta de dientes!!!

Si es que el tema más que nada es por el disipador,en una ocasión monté todo y dejé para el final el micro y el disipa,luego resulta que no encajaban bien las pestañas(esas que van en los 4 orificios de la placa) y me tocó desmontar todo para acceder a la parte trasera de la placa y facilitarme la labor :facepalm:

Na,que no hay prisa que es para Reyes,pero ya tenía planning y ahora toca una peli,tengo por aquí la de "El legado de Bourne" pendiente,o igual pierdo el tiempo viendo gilipolleces por youtube :alone:
Saludos.

Vaya tela, bueno mejor hoy que no te pase el sábado pero te jodaste el rato relax, yo me voy a ver la del legado ahora mismito por cierto y después al sobre.

[deeiivid]

@Sylver:

Jajajaja +1, además de verdad, siempre pasa… yo tengo clavada la media en las 2:00 AM... antes no soy capaz de ponerme la peli, me lio buscando sinopsis, trailers, pamplinas... Que maligno es internet en manos inocentes... :alone:
xD

Pues teneis suerte… Yo llevo unas semanas que las 4 o 5 no me las quita nadie u.U tengo el horario totalmente descolocado.

sobre lo de la pasta termica, pues no eres al unico que le ha pasado, a mi me paso cuando me traje aqui el PC, le quite la RL y todo contento llego con todo, me dispongo a montar y... ***** la pasta termica. La compro por la tarde, me dispongo a montar y... ***** la sujecion del disipador... Donde estara... tampoco tenia la sujecion de los ventis al disipa... al final hice un "apaño" doblando unos clips para los ventis y luego para el disipador use otras sujeciones tambien improvisadas... :ugly::ugly::ugly:

[Nemo]

@Gaiteiro:

If the main issue is the heatsink, I once **assembled everything and left the micro and the heatsink for last,** then it turned out that the tabs (the ones that go into the 4 holes of the board) didn't fit well and I had to disassemble everything to access the back of the board and make the job easier :facepalm:

Well Gaiteiro, that's a rookie mistake, it usually only happens once, until you discover that the best and most comfortable thing to do is to mount the heatsink (especially if it's one of the big ones) outside and then mount the board in the case.

Best regards

[Sylver]

@deeiivid:

Well, you're lucky... I've had 4 or 5 sleepless nights for weeks now u.U my schedule is totally messed up.

about the thermal paste, you're not the only one it happened to, it happened to me when I brought my PC here, I removed the RL and was all happy with everything, I got ready to assemble and... ***** the thermal paste. I bought it in the afternoon, got ready to assemble and... ***** the heatsink bracket... Where is it... I also didn't have the fan brackets for the heatsink... in the end I did a "quick fix" by bending some clips for the fans and then for the heatsink I used other improvised brackets... :ugly::ugly::ugly:

Haha it happens to me every now and then too, but at least at 2 am at the earliest... xD

And when it comes to improvisations you're just like me... here we are, making do with what we have, making flexos with cardboard, brackets with clips, case fronts with cardboard, thermal toothpaste... Up yours for the quick fixes! :ugly:

[deeiivid]

@Sylver:

Jajaja I also have that from time to time, but at least at 2 am at the earliest... xD

And about improvisations you are like me... here we are making do with what we have, making flexes with cardboard, clips for fasteners, tower fronts with cardboard, thermal toothpaste... A thumbs up for the improvisations! :ugly:

If improvisation is the thing NEW HTPC Exteme. - HardLimit

my philosophy is, If you can't fix it with duct tape, you just need more duct tape!

[Sylver]

You'll tell me... Testing the ingenuity is so much fun... :ugly:

[Franziskaner]

@Sylver:

Ya me dirás… Poner a prueba el ingenio es tan divertido... :ugly:

Pero que bestia eres …...
Cómo eso se suelte metes las tijeras para sacarlo
SALUD

[Sylver]

Scissors? That's for the weak, man! You unplug it from the wall and pull it out with your hand, body and all, without removing the weights! :ugly: :ugly: :ugly: :ugly: :ugly:

[Franziskaner]

iCP is called ICP you are able to have "plumbs" with thread ….

[Sylver]

@Franziskaner:

iCP is called ICP you are capable of having "plumbs" with thread ….

I haven't reached that point because I haven't touched the plumbs, but if something ever gets messed up, get ready for what the repair will be like… :ugly: