• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    Help with drivers

    Programado Fijo Cerrado Movido Procesadores, placas base y memorias
    11 Mensajes 6 Posters 1.8k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • C Desconectado
      cinusara
      Última edición por

      Hello I have an old PC I just installed Windows XP but when I turn it off it stays on the computer is turning off and does not turn off completely. The only problem I find is the sound drivers.
      The computer is already old and I do not have it connected to the network,
      The motherboard is a MATSONIC MS8137C.
      I have tried downloading the sound drivers from the internet to install them via USB but there is no way
      to download them, in all the sites I have tried they download installers to install via the internet someone can help me, how and where could I download the drivers to install them via USB on the other PC.
      I have tried it on the matsonic page and it is the same.
      Can someone help me and tell me how I could solve this problem.
      Thanks.

      1 Respuesta Última respuesta Responder Citar 0
      • F Desconectado
        fjavi
        Última edición por

        Bad luck, I have one of those Matsonic but with Intel and years ago there were no drivers, they closed many years ago, I would look for the chipset on ViA here in this link look for the KT266A, that's the driver for the chipset and audio I think, mine was SIS the chipset and install everything together.
        VIA Download Center - VIA Chipsets - VIA Technologies, Inc.
        The same one serves you.
        If it doesn't put the audio look here and for AC 97, you will have to look for each component
        6 (5.1) channels audio output capability (compliant with AC'97 2.2 specifications)
        Intel® AC97(Rev 2.2) compatible, meeting Microsoft® PC2001
        http://www.matsonic.com/Computer-Desktop-Support/Models/ms8167c.php
        although it says 8167C it sends me from the 8137C+ maybe you find it easier where that 8167C is
        regards
        L C 2 Respuestas Última respuesta Responder Citar 0
        • L Desconectado
          lanweidana @fjavi
          Última edición por

          ¡Esta publicación está eliminada!
          1 Respuesta Última respuesta Responder Citar 0
          • C Desconectado
            cinusara @fjavi
            Última edición por

            Hello Fjavi, and thank you for responding, the board you mention is almost the same but the one I have is
            an APLOLO KT266A via

            Built-in Ac97 PCI audio
            Supports built-in AC97 Digital Audio. Dual full-duplex Direct Sound channels. H/W Sound Blaster Pro DOS Legacy compatibility. FM Synthesis for legacy compatibility. Supports game or MIDI port

            well I have tried to look at this link you gave me but the truth is I am not very familiar with these things but I will try thanks.

            C F 2 Respuestas Última respuesta Responder Citar 0
            • C Desconectado
              cinusara @cinusara
              Última edición por

              Hello again, I have gone to the page and looked for the chipset, the page is this

              VIA KT266A - VIA Technologies, Inc.

              but I have looked and I do not see where I can download it, the links they give are for images, can you tell me how to download these drivers, thank you.
              FassouF 1 Respuesta Última respuesta Responder Citar 0
              • FassouF Desconectado
                Fassou MODERADOR @cinusara
                Última edición por

                You can also check out the website of VIA Arena, where they usually have everything about VIA products.

                Salu2!

                Intel i5 3570k / ASRock Z77 Extreme 4 / G.Skill F3-12800CL9D-8GBRL / Sapphire HD5850 / Samsung HD103UJ / TR TrueSpirit / NZXT Source 210 / OCZ ZS550W
                Intel i5 4570 / ASRock H87 Pro 4 / 2x G.Skill F3-14900CL8-4GBXM / Samsung 850 EVO 250Gb + ST1000DM003 + ST2000DM003 + HGST HDS723020BLA642 + Maxtor 6V250F0 / CM Seidon 240M / Zalman MS800 / CM MWE 550
                AMD Ryzen 7 1800X / B350 / 2x8GB Samsung DDR4-2400 CL17 / NVIDIA GTX 1070 8GB / SSD 120GB + ST4000DM004 + ST6000DM003 / EVGA Supernova 650 G2

                hlbm signature

                krampakK C 2 Respuestas Última respuesta Responder Citar 0
                • krampakK Desconectado
                  krampak Global Moderator @Fassou
                  Última edición por

                  I think VIA Arena is no longer what it was Fassou ?

                  Mi Configuración
                  hlbm signature

                  1 Respuesta Última respuesta Responder Citar 0
                  • C Desconectado
                    cinusara @Fassou
                    Última edición por

                    Well, thanks to both of you, but I've looked and looked again, the truth is that I'm not very familiar with these things, but I'm going to have to give up, I've been looking for those damn drivers for 4 days for nothing, it would be cheaper for me to buy a new board.
                    Thanks

                    1 Respuesta Última respuesta Responder Citar 0
                    • F Desconectado
                      fjavi @cinusara
                      Última edición por

                      @cinusara:

                      Hello Fjavi, and thanks for responding, the board you mention is almost the same but the one I have is
                      a VIA APLOLO KT266A

                      Built-in Ac97 PCI audio
                      Supports built-in AC97 Digital Audio. Dual full-duplex Direct Sound channels. H/W Sound Blaster Pro DOS Legacy compatibility. FM Synthesis for legacy compatibility. Supports game or MIDI port

                      well I've tried to look at this link you gave me but I'm not very familiar with these things but I'll try thanks.

                      Look at this I think it's the audio one.
                      VIA Vinyl Audio Codec 5.80c

                      This should work on a KT266A

                      http://www.microsofttranslator.com/BV.aspx?ref=IE8Activity&a=http%3A%2F%2Fdownloads.guru3d.com%2FVIA-AGP-Driver-4.10b-download-346.html

                      I would try these.

                      download from Guru3D.com

                      On the Matsonic page if you go to socket A and open down you can see the MS8137 but when you click it sends you to the other with KT333, that's why, but that audio driver says it's for boards with SB 8233A usea that should work for me and the others should work the same, I put one of those on my board a long time ago and they work even if it's for Intel.

                      From here you could also download even if it's Gigabyte the drivers are similar having the same chipset and the same SB, they usually work.
                      http://es.gigabyte.com/products/page/mb/ga-7vtx-p/download/

                      If your board has Realtec sound it's the same as this.
                      http://es.gigabyte.com/products/page/mb/ga-7vtxe_plus/download/

                      regards

                      C 1 Respuesta Última respuesta Responder Citar 0
                      • C Desconectado
                        cinusara @fjavi
                        Última edición por

                        Thanks fjavi for responding, I went to the guru page and unfortunately they no longer have those files
                        but I am downloading the ones from gygabyte and will try to see if there is any luck if not what are we going to do.
                        Thanks
                        If they work I will let you know.

                        Y 1 Respuesta Última respuesta Responder Citar 0
                        • Y Desconectado
                          yellopendo @cinusara
                          Última edición por

                          ¡Esta publicación está eliminada!
                          1 Respuesta Última respuesta Responder Citar 0
                          • 1 / 1
                          • First post
                            Last post

                          Foreros conectados [Conectados hoy]

                          0 usuarios activos (0 miembros y 0 invitados).
                          febesin, pAtO,

                          Estadísticas de Hardlimit

                          Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                          Somos un total de 34.9k miembros registrados.
                          roymendez ha sido nuestro último fichaje.
                          El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.