[ADVICE] My first OC CoreI5 3570K Ivy @ 4.4 Ghz

[Joxmiguel]

Thanks for your response Obione, the EIST is enabled on the mobo, in the LLC I have it set to Auto. I will try with LLC in medium.

In Medium it increases the temperature of the processor very quickly, and it stays at 4.4ghz even when idle.

[Obione]

Try enabling C-States then.

Man, of course it will increase, it will give you more voltage under load. The thing is that you have to compensate by relaxing with offset. What you shouldn't do is have more voltage at rest than under load.

[Joxmiguel]

I already lowered the voltage a bit more, what I did was put the LLC on Medium (25%) and the offset stayed at -0.010, (minus 10) the strange thing is that it still has higher voltage at rest, it has 1.264v at rest, under load it has 1.240v - 1.232v. The temperature was reduced by a few degrees, should I keep reducing the offset? or is it no longer necessary, even the Prime doesn't crash xD

[Obione]

Reduce offset until you have less voltage at rest and if it doesn't last 2 hours in custom mode (min and max FFT 1792, 1 pass/min and all RAM in MB) give it one more point of LLC until it's stable.

[Joxmiguel]

Perfect, I'll send you the test results later, thank you very much for your help Obione xD, what catches my attention about this OC, is that at 4.5ghz I can't do almost any movement, the PC always freezes, and at 4.4 I have been able to do many tests, Regards!

[Joxmiguel]

Everything seemed to work perfectly at 4.4Ghz, I'll share my results and photos of what was done.

Temperatures at idle did not exceed 32°c, and under full load using PRIME95 for more than 4 hours of testing did not exceed 73°c, where almost the entire test was maintained at 65-70°c

The Offset method of +0.010 (2 steps up) was used, giving a voltage at idle of 1.008v and under full load to 1.256v (not bad xD)

I attach the images of my bios from my Asus P8Z68-V/GEN3 mobo.

I am very grateful to Obione for his advice and wisdom ;D

Best regards! I hope it serves those who are just starting out in the art of overclocking like me.

[lamberto1972]

This weekend I have assembled my new pc configuration with the following characteristics:

• COOLER MASTER COSMOS 1000
• ASRock Z77 Extreme4
• Intel i5 3570k Ivy Bridge.
• Sapphire Radeon HD 7950 whit boost 3 GB DDR5
• 4 X 2 GB DDR3 TRANSCENT TX2000KLU-4GK 2000 OC
• Corsair Hydro Series H100
  And I will complement it with this..
• NOX Hummer M 750W Modular
• 2 x Aerocool Shark Fan 140mm Black Edition
• 2 x SilverStone FF141 Rejilla con Filtro Magnético

For now I have left the micro at 4500 and I have run the IntelBurnTestV2, the OOCT and I am running the Prime95 version 96.6 and I am getting temperatures that at rest barely exceed 25 degrees and under load passing the prime95 it maintains a temperature between 59 and 60 degrees and with a voltage of 1.8 at most after performing 3 hours of tests

[Obione]

1.8v, are you sure about that value? Look at the Vcore carefully.

[lamberto1972]

@Obione:

¿1.8v, estás seguro de ese valor? Mira bien el Vcore.

1.18 sorry

[PistonS]

@lamberto1972:

1.18 sorry

¿pelin alta la temperatura para tan buen voltaje?,….

saludos

[Obione]

I don't see it as bad for 4.4 with a 212 considering it's an Ivy.

[PistonS]

@Obione:

I don't see it as bad for 4.4 with a 212 being an Ivy.

OK, I saw an H100 in the signature

Regards

[Obione]

Aamijoo.

PD: Bienvenido PistonS

[PistonS]

@Obione:

Aamijoo.

PD: Bienvenido PistonS

muchas gracias Obione,…entonces, ¿es un 212 o un H100)

saludos

[suidai123]

¡Esta publicación está eliminada!