[ADVICE] My first OC CoreI5 3570K Ivy @ 4.4 Ghz

[Joxmiguel]

I already lowered the voltage a bit more, what I did was put the LLC on Medium (25%) and the offset stayed at -0.010, (minus 10) the strange thing is that it still has higher voltage at rest, it has 1.264v at rest, under load it has 1.240v - 1.232v. The temperature was reduced by a few degrees, should I keep reducing the offset? or is it no longer necessary, even the Prime doesn't crash xD

[Obione]

Reduce offset until you have less voltage at rest and if it doesn't last 2 hours in custom mode (min and max FFT 1792, 1 pass/min and all RAM in MB) give it one more point of LLC until it's stable.

[Joxmiguel]

Perfect, I'll send you the test results later, thank you very much for your help Obione xD, what catches my attention about this OC, is that at 4.5ghz I can't do almost any movement, the PC always freezes, and at 4.4 I have been able to do many tests, Regards!

[Joxmiguel]

Everything seemed to work perfectly at 4.4Ghz, I'll share my results and photos of what was done.

Temperatures at idle did not exceed 32°c, and under full load using PRIME95 for more than 4 hours of testing did not exceed 73°c, where almost the entire test was maintained at 65-70°c

The Offset method of +0.010 (2 steps up) was used, giving a voltage at idle of 1.008v and under full load to 1.256v (not bad xD)

I attach the images of my bios from my Asus P8Z68-V/GEN3 mobo.

I am very grateful to Obione for his advice and wisdom ;D

Best regards! I hope it serves those who are just starting out in the art of overclocking like me.

[lamberto1972]

This weekend I have assembled my new pc configuration with the following characteristics:

• COOLER MASTER COSMOS 1000
• ASRock Z77 Extreme4
• Intel i5 3570k Ivy Bridge.
• Sapphire Radeon HD 7950 whit boost 3 GB DDR5
• 4 X 2 GB DDR3 TRANSCENT TX2000KLU-4GK 2000 OC
• Corsair Hydro Series H100
  And I will complement it with this..
• NOX Hummer M 750W Modular
• 2 x Aerocool Shark Fan 140mm Black Edition
• 2 x SilverStone FF141 Rejilla con Filtro Magnético

For now I have left the micro at 4500 and I have run the IntelBurnTestV2, the OOCT and I am running the Prime95 version 96.6 and I am getting temperatures that at rest barely exceed 25 degrees and under load passing the prime95 it maintains a temperature between 59 and 60 degrees and with a voltage of 1.8 at most after performing 3 hours of tests

[Obione]

1.8v, are you sure about that value? Look at the Vcore carefully.

[lamberto1972]

@Obione:

¿1.8v, estás seguro de ese valor? Mira bien el Vcore.

1.18 sorry

[PistonS]

@lamberto1972:

1.18 sorry

¿pelin alta la temperatura para tan buen voltaje?,….

saludos

[Obione]

I don't see it as bad for 4.4 with a 212 considering it's an Ivy.

[PistonS]

@Obione:

I don't see it as bad for 4.4 with a 212 being an Ivy.

OK, I saw an H100 in the signature

Regards

[Obione]

Aamijoo.

PD: Bienvenido PistonS

[PistonS]

@Obione:

Aamijoo.

PD: Bienvenido PistonS

muchas gracias Obione,…entonces, ¿es un 212 o un H100)

saludos

[suidai123]

¡Esta publicación está eliminada!