[Help] Intel Core i7 3930K + Asus Rampage IV Extreme

[gamingpy]

Please I need you to give me a little help so I can overclock my processor, I have my hardware configuration in my signature. I must clarify that I have never done an OC to a micro so I will ask for patience from those people willing to help me.. I have already read the basic guide but I would like you to give me a suggestion before I dive into this whole topic, thank you very much.

Regards

[Jotole]

@gamingpy:

Please I need you to give me a little help so I can overclock my processor, I have my hardware configuration in my signature. I must clarify that I have never done an OC to a micro so I will ask for patience from those people willing to help me.. I have already read the basic guide but I would like you to give me a suggestion before I dive into this whole topic, thank you very much.

Regards

Hi gamingpy, which guide have you read??

Bye…

[gamingpy]

@Jotole:

Hola gamingpy, que guia te has leido??

Salu2…

Hola Jotole que tal como estas, pues veras he leido la guia basica que ponen aqui en el foro y tambien esta que es un poco mas completita y con imagenes.

[Fassou]

I remove the link because you are very heavy with the "other forum".

Best regards!

[gamingpy]

My idea is not to spam at all, I was just indicating where I read it, just as an informative, but well, if that is already breaking rules, I respect the decision. I just want you to help me overclock this micro that I have in normal mode, so to speak, without taking advantage of the overclocking that I could be doing...

Regards

[Jotole]

@gamingpy:

Hello Jotole, how are you? Well, you see, I've read the basic guide that's posted here in the forum and there's also one that's a bit more complete with images.

If you've read that guide, you already know some basic concepts, like it's your first time doing oc, and you have a processor with multi unlocked. We're not going to pretend to go into more than 4.5 Ghz.

Put the oc in manual and the processor's multi to 40 without touching anything. Tell me if it boots up, with a gpu-z monitor the voltage that the board sets automatically and tell me.

Leave the rest of the values in auto.

Regards….

[Obione]

You messed up by giving it your all on the bitches xD

Besides cpu-z, you have OCCT, it's very good because it shows you the minimum, maximum and graph of the voltage.

[Jotole]

@Obione:

You dropped a 'g' when it comes to giving it to the bitches xD

Besides cpu-z, you have OCCT, it's very good because it shows you the minimum, maximum and graph of the voltage.

Right, what was I thinking about…..:ugly:

Thanks for the tip..!!

Best regards

[kpablo]

First of all, which heatsink are you using?

[gamingpy]

@kpablo:

First of all, what cooler are you using?

H100 my compatriot Kpablo ;D

[Jotole]

@gamingpy:

H100 mi compatriota Kpablo ;D

Did you try what I told you above??

Salu2…

[haoya]

¡Esta publicación está eliminada!

[gamingpy]

@Jotole:

Did you try what I told you above??

Salu2…

No yet my friend Jotole I will try it as soon as I have time, it's that lately due to work issues I am short of time just because of that, but as soon as I do it I will be uploading a screenshot to be able to see the results.. Thanks for the help

Regards

[gamingpy]

By tweaking some settings I've arrived at the following.

Forgive my ignorance but I don't think I see any change or is it just me?? any help with this preview with the oc..

[gamingpy]

Do you think the core voltages are over or not?

[Jotole]

@gamingpy:

I think the core voltages are set too high or not?

That's because it's on automatic, now with that configuration you have, set voltage to 1.33v. Without touching anything else, let's see how that proce... ;).

If Win starts up with that voltage, (which it should), run prime 95 for 20 min. Monitor temp, the most important ones are always at full. The ones you have set in idell are normal...

If it crashes after prime, keep increasing voltage by 0.01v each time, and checking stability.

No need to thank me for the help, man,

Regards...

[Obione]

If you want help, make it easy, write voltage and frequencies or upload a photo in good condition, crop until it can be read comfortably.

[gamingpy]

@Jotole:

That's because it's on automatic, now with that configuration you have, set voltage 1,33v. Without touching anything else, let's see how that proce…......... ;).

If Win starts with that voltage, (which it should), run prime 95 for 20 min. Monitor temp, the most important ones are always at full. The ones you have set in idell are normal...

If it crashes after prime, keep raising the voltage by 0.01v each time, and checking stability.

No need to thank me for the help man,

Regards...

After making the adjustments you told me Jotole it looks like this..

What do you think of the temperatures, voltage, etc…

Many thanks for your great help Jotole without you I couldn't have done it

Regards

[Jotole]

@gamingpy:

After making the adjustments you told me, Jotole, it looks like this...

!

What do you think about the temperatures, voltage, etc...

Thank you very much for your great help Jotole, without you I couldn't have done it

Best regards

The voltage is not bad, there are worse ones. ;). Let's see if we can lower it a bit more. Lower it to 1,31v and do the same test as before.

The temperatures, are at the limit for my taste, of course it's an H100, and passing prime, playing I doubt you'll go over 60º. Which is a more moderate temperature.

But if we are looking for the nice figure of 4.5 Ghz we have to scrape all the voltage we can. Since that H100 will limit our OC.

Salu2...

[gamingpy]

@Jotole:

The voltage is not bad, there are worse ones. ;). Let's see if we can lower it a bit more. Lower it to 1.31v and do the same test as before.

The temperatures are at the limit for my taste, of course it is an H100, and passing prime, playing I doubt you will exceed 60º. Which is a more moderate temperature.

But if we are looking for the nice figure of 4.5 Ghz we have to scrape all the voltage we can. Since that H100 will limit our OC.

Salu2….

Updating to 4.3 as I know until what voltage can I lower? because as I understand it the less voltage you use the better.