• Portada
    • Recientes
    • Usuarios
    • Registrarse
    • Conectarse

    New PC but…

    Programado Fijo Cerrado Movido Procesadores, placas base y memorias
    33 Mensajes 10 Posters 6.0k Visitas 1 Watching
    Cargando más mensajes
    • Más antiguo a más nuevo
    • Más nuevo a más antiguo
    • Mayor número de Votos
    Responder
    • Responder como tema
    Accede para responder
    Este tema ha sido borrado. Solo los usuarios que tengan privilegios de administración de temas pueden verlo.
    • whoololonW Desconectado
      whoololon Veteranos HL @Bm4n
      Última edición por

      An analogy to illustrate the case: convection ovens have a fan that makes the air circulate throughout the oven, distributing the temperature better, which remains more or less constant unless the door is opened.

      In this case, what suits us is to "open the door", lower the temperature, and the method described above is, in my opinion, the cheapest and most effective. And as Bm4n points out, crank up the fan until it blows, it will always be cheaper than a new micro. ;D

      ...me lo dicen las voces...

      hlbm signature

      ferelxyxF 1 Respuesta Última respuesta Responder Citar 0
      • ferelxyxF Desconectado
        ferelxyx Veteranos HL @whoololon
        Última edición por

        if this is your VS4 case, buy a fan for the front that it doesn't come with,

        regards

        SylverS 1 Respuesta Última respuesta Responder Citar 0
        • SylverS Desconectado
          Sylver Veteranos HL @ferelxyx
          Última edición por

          The fan won't be damaged by setting it to maximum. As whoololon says, I lowered the temperature of all the components in my PC by opening the side panels and plugging in a home fan, no underclocking or other stories.

          Another option (more orthodox) is, as they tell you, to mount a few more fans such as:

          -in the front to bring in air
          -in the top back to take out air
          -in a side to bring in or take out air depending on the position of the graphics card and the heat it dissipates

          If you do this, you will improve temperatures and avoid complicating your life with underclocking and other stories.

          Regards

          >> i7-2600K Sandy Bridge @4.4GHz || Noctua NH-D14 || ASRock Z77 Extreme4 || 4x8Gb G.Skill Ripjaws X DDR3 1600MHz || XFX RX 5700 XT 8Gb || SSD Samsung 850 PRO 256Gb & 850 EVO 500Gb || WD Caviar Green 1Tb || Barracuda 1Tb || Corsair TX650 V2 || M-Audio Fast Track Pro || KRK RP8 RoKit G3 || BenQ GW2750 27"
          >> Athlon 64 X2 5600+ Brisbane @2.9GHz || Gigabyte GA-M61PME-S2 || 2x2Gb DDR2 Kingston 800MHz || Sapphire Radeon HD 5850 Xtreme 1Gb || Maxtor 320Gb SATA2 || OCZ ModXStream 500W Modular || TEAC PowerMax 120/2 || Acer X243w 24"
          >> Intel Core2Duo E6600 Conroe @2.4GHz || Asus P5N32-SLI SE DELUXE || 2x1Gb DDR2 Kingston 800MHz || Asus nVidia GeForce 9800GT 1Gb GDDR3 || Seagate Barracuda IDE 80Gb 7200RPM || Linkworld LPK12-35 450W

          JuezDredJ 1 Respuesta Última respuesta Responder Citar 0
          • FranziskanerF Desconectado
            Franziskaner @MaxLG
            Última edición por

            @MaxLG:

            Before playing and after playing, it marks my hard drive between 38-40 degrees,

            It comes with the standard fan, because I couldn't afford a good fan, but anyway, I've had quite a few in stock, and if you don't overclock it, they haven't given me any problems.

            But anyway, I'll wait until summer passes and if it's still the same, I'll get a good heatsink.

            I also have to tell you that the computer has about 6 cm of space on the sides and 10 cm at the back

            in a nutshell : PC boxed :wall:

            the basic thing about a tower is that you have space for the fans to be able to take in air and expel it from the tower, if you put the tower in a drawer, you're creating an oven. Stock coolers are usually crap (maybe too explicit ;D) they're noisy and cool poorly, they practically throw them in with the micro to take up space :eoh:
            for my personal taste, that tower is not worth anything (the case), the decent thing is a case with top fans blowing air out, everything else is a waste of time (and I say this from personal experience )
            regards

            JuezDredJ 1 Respuesta Última respuesta Responder Citar 0
            • JuezDredJ Desconectado
              JuezDred Veteranos HL @Sylver
              Última edición por

              but let's see…. 40º inside.... playing.... without a fan other than the minimum... it's perfect. if you tell me it reaches 80º like I have a p4 it's okay. but at 40º. equipment designed to withstand much more. I've seen nvidia graphics cards at over 75 degrees ventilated by convection and without blinking. that's right. they don't last 2 years. I would worry more if the idle temperature and the maximum of the equipment varied too much. since the motherboard is the one that regulates.

              https://bm.hardlimit.com/result.php?bm=337b052b429b9ff0c9c273d820385d4675

              hlbm signature

              1 Respuesta Última respuesta Responder Citar 0
              • JuezDredJ Desconectado
                JuezDred Veteranos HL @Franziskaner
                Última edición por

                @Franziskaner:

                in a nutshell: PC in a drawer :wall:

                the basic thing about a tower is that you have space so that the fans can take in air and expel it from the tower. if you put the tower in a drawer, you're creating an oven. stock coolers are usually crap (maybe too explicit;D) they're noisy and cool poorly, they practically throw them in with the micro to add bulk :eoh:
                for my personal taste, that tower is not worth anything (the case). the most decent thing is a case with top fans blowing air out, everything else is a waste of time (and I say this from personal experience)
                regards

                I have all my equipment with the stock coolers and no noise. only that the case is a gigabyte and it has good air outlet. and I built that tower last week in 10 computers for a design company and it's very, very well finished. true that it only comes with one fan, but they don't need more.

                https://bm.hardlimit.com/result.php?bm=337b052b429b9ff0c9c273d820385d4675

                hlbm signature

                whoololonW FranziskanerF 2 Respuestas Última respuesta Responder Citar 0
                • whoololonW Desconectado
                  whoololon Veteranos HL @JuezDred
                  Última edición por

                  The funny thing is that, the towers (in general) if instead of the sides that are so boring, they put perforated panels, they would balance ventilation and noise.
                  But come on, nothing that can't be fixed with a couple of trips to the hardware store. ?

                  ...me lo dicen las voces...

                  hlbm signature

                  FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
                  • FranziskanerF Desconectado
                    Franziskaner @JuezDred
                    Última edición por

                    @JuezDred:

                    I have all my equipment with the stock coolers and no noise. Just that the case is a Gigabyte and it has good air flow. And I built that tower last week on 10 computers for a design company and it is very well finished. True that it only comes with one fan, but they don't need more.

                    well, the AMD coolers are pretty bad ;D
                    about the tower, I'm not saying it's not well finished, I'm saying that as ventilation it's terrible.
                    regards

                    1 Respuesta Última respuesta Responder Citar 0
                    • FranziskanerF Desconectado
                      Franziskaner @whoololon
                      Última edición por

                      This post is being processed/translated. The original version will be shown:

                      @whoololon:

                      Lo gracioso es que, las torres (en general) si en lugar de los laterales esos tan sosos, montaran paneles perforados, equilibrarían ventilación y ruido.
                      Pero vamos, nada que no se arregle con un par de viajes a la ferreteria. 🍺

                      Ventilation puede…. Arriesgó de ser un acumulador de polvo
                      Silencioso ...... Pues seguro que no.
                      Saludos

                      JuezDredJ 1 Respuesta Última respuesta Responder Citar 0
                      • JuezDredJ Desconectado
                        JuezDred Veteranos HL @Franziskaner
                        Última edición por

                        This post is being processed/translated. The original version will be shown:

                        @Franziskaner:

                        Ventilation puede…. Arriesgó de ser un acumulador de polvo
                        Silencioso ...... Pues seguro que no.
                        Saludos

                        Tengo una gigabyte como carcasa y el lateral viene perforado. No acumula polvo y apenas hay ruido. El material interno es rugoso y absorbe el ruido. Respecto a los disipadores amd. Tienes de los basicos hasts con varios headpipes. Segun procesador y rango de potencia a disipar. Te pasaria fotos de algunos. Pero ni me molesto. Por cierto. La carcasa de este chico. Viene preparada para refrigeracion liquida, la fuente viene en la parte de abajo y el procesador tiene muy muy buena ventilacion por conveccion.

                        https://bm.hardlimit.com/result.php?bm=337b052b429b9ff0c9c273d820385d4675

                        hlbm signature

                        FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
                        • FranziskanerF Desconectado
                          Franziskaner @JuezDred
                          Última edición por

                          This post is being processed/translated. The original version will be shown:

                          @JuezDred:

                          Tengo una gigabyte como carcasa y el lateral viene perforado. No acumula polvo y apenas hay ruido. El material interno es rugoso y absorbe el ruido. Respecto a los disipadores amd. Tienes de los basicos hasts con varios headpipes. Segun procesador y rango de potencia a disipar. Te pasaria fotos de algunos. Pero ni me molesto. Por cierto. La carcasa de este chico. Viene preparada para refrigeracion liquida, la fuente viene en la parte de abajo y el procesador tiene muy muy buena ventilacion por conveccion.

                          estoy convencido que una torre con los laterales perforados y sin filtros es un templo de la limpieza ( sarcasmo )

                          pues si mejor que no te molestes por que yo siempre e tenido AMD salvo un par de intels y un cirix
                          (actualmente un 965 a 4 Ghz )

                          si si, claro, hoy en dia las hacen dos agujeros para pasar tubos y dicen que están preparadas para RL ;D
                          realmente no se para que hacen los agujeros , si es mas fácil montar uno de estos y puedes decir que tienes RL :risitas: sobre la F.A solo faltaría que se abría comprado una torre de hace una década (+ o - )
                          sobre la disipación de el Micro por convección …... ¿ como has llegado a esa conclusión ? ¿que pasa ? que por que tenga un ventilador de 120 mm en la trasera sacando aire es una virgueria :facepalm: y aun gracias que parece que se pueden montar ventis de 140 mm .

                          saludos

                          P.D sobre el ruido , la unica manera que conozco de aislarlo es o montando ventiladores silenciosos o [URL="http://www.tienda-traxtore.com/tienda/index.php?page=pp_producto.php&
                          md=0&ref=MDD348"]con esto

                          saludos2

                          JuezDredJ 1 Respuesta Última respuesta Responder Citar 0
                          • JuezDredJ Desconectado
                            JuezDred Veteranos HL @Franziskaner
                            Última edición por

                            This post is being processed/translated. The original version will be shown:

                            @Franziskaner:

                            estoy convencido que una torre con los laterales perforados y sin filtros es un templo de la limpieza ( sarcasmo )

                            pues si mejor que no te molestes por que yo siempre e tenido AMD salvo un par de intels y un cirix
                            (actualmente un 965 a 4 Ghz )

                            si si, claro, hoy en dia las hacen dos agujeros para pasar tubos y dicen que están preparadas para RL ;D
                            realmente no se para que hacen los agujeros , si es mas fácil montar uno de estos y puedes decir que tienes RL :risitas: sobre la F.A solo faltaría que se abría comprado una torre de hace una década (+ o - )
                            sobre la disipación de el Micro por convección …... ¿ como has llegado a esa conclusión ? ¿que pasa ? que por que tenga un ventilador de 120 mm en la trasera sacando aire es una virgueria :facepalm: y aun gracias que parece que se pueden montar ventis de 140 mm .

                            saludos

                            P.D sobre el ruido , la unica manera que conozco de aislarlo es o montando ventiladores silenciosos o [URL="http://www.tienda-traxtore.com/tienda/index.php?page=pp_producto.php&
                            md=0&ref=MDD348"]con esto

                            Si no sabes lo que es conveccion…. Tu mismo. La carcasa trae en la zona alta un hueco para instalar dos ventiladores de 12cv y el radiador de agua. Viene con conector usb 3.0. Y tacos de goma para agarrar los ventiladores..... Por lo demas. No entro en discuciones absurdas e inertes

                            saludos2

                            https://bm.hardlimit.com/result.php?bm=337b052b429b9ff0c9c273d820385d4675

                            hlbm signature

                            FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
                            • FranziskanerF Desconectado
                              Franziskaner @JuezDred
                              Última edición por

                              This post is being processed/translated. The original version will be shown:

                              pero donde ves tu un hueco para instalar dos ventiladores ¿?
                              los siguientes modelos SI tiene dos huecos para instalar dos ventiladores en la zona superior :
                              AeroCool Strike-X One
                              AeroCool Strike-X One Advance USB 3.0
                              Aerocool VS-92 Black Edition
                              AeroCool Templarius Ferrum
                              Aerocool Strike One Army
                              en el rango de precios de la caja VS4 que se supone que es la que tiene .
                              saludos

                              P.D sobre :
                              Te noto estresado
                              a mi ciertas personas que van de fantasmas por la vida como que :risitas:

                              saludos2

                              Kernel1.0K 1 Respuesta Última respuesta Responder Citar 0
                              • Kernel1.0K Desconectado
                                Kernel1.0 Veteranos HL @Franziskaner
                                Última edición por

                                This post is being processed/translated. The original version will be shown:

                                @JuezDred creo que te has confundido, el dice tener la Aerocool vs4 nada que ver con la Thermaltake V4.
                                @Franziskaner se pueden decir las cosas de otra manera, Casper.

                                JuezDredJ FranziskanerF 2 Respuestas Última respuesta Responder Citar 0
                                • JuezDredJ Desconectado
                                  JuezDred Veteranos HL @Kernel1.0
                                  Última edición por

                                  This post is being processed/translated. The original version will be shown:

                                  @Kernel1.0:

                                  @JuezDred creo que te has confundido, el dice tener la Aerocool vs4 nada que ver con la Thermaltake V4.
                                  @Franziskaner se pueden decir las cosas de otra manera, Casper.

                                  Pues tienes razon, con tanto trabajo, que si la ambulancia y la informatica a veces uno pierde de vista el modelo de carcasa que esta montando jeje. Somos humanos y equivocarse es algo posible.

                                  https://bm.hardlimit.com/result.php?bm=337b052b429b9ff0c9c273d820385d4675

                                  hlbm signature

                                  M 1 Respuesta Última respuesta Responder Citar 0
                                  • FranziskanerF Desconectado
                                    Franziskaner @Kernel1.0
                                    Última edición por

                                    ¡Esta publicación está eliminada!
                                    packosoftP Bm4nB 2 Respuestas Última respuesta Responder Citar 0
                                    • packosoftP Desconectado
                                      packosoft Admin honoris causa @Franziskaner
                                      Última edición por

                                      ¡Esta publicación está eliminada!
                                      FranziskanerF 1 Respuesta Última respuesta Responder Citar 0
                                      • FranziskanerF Desconectado
                                        Franziskaner @packosoft
                                        Última edición por

                                        ¡Esta publicación está eliminada!
                                        1 Respuesta Última respuesta Responder Citar 0
                                        • Bm4nB Desconectado
                                          Bm4n @Franziskaner
                                          Última edición por

                                          ¡Esta publicación está eliminada!
                                          FassouF 1 Respuesta Última respuesta Responder Citar 0
                                          • FassouF Desconectado
                                            Fassou MODERADOR @Bm4n
                                            Última edición por

                                            ¡Esta publicación está eliminada!
                                            1 Respuesta Última respuesta Responder Citar 0
                                            • 1
                                            • 2
                                            • 2 / 2
                                            • First post
                                              Last post

                                            Foreros conectados [Conectados hoy]

                                            0 usuarios activos (0 miembros y 0 invitados).
                                            febesin, pAtO,

                                            Estadísticas de Hardlimit

                                            Los hardlimitianos han creado un total de 543.5k posts en 62.9k hilos.
                                            Somos un total de 34.9k miembros registrados.
                                            roymendez ha sido nuestro último fichaje.
                                            El récord de usuarios en linea fue de 123 y se produjo el Thu Jan 15 2026.