New project Mountain Mods Ascension
-
Today I received a large amount of Bistpower material, but as every day I think something different I will have to buy more…..
Tomorrow I will upload some pictures.
Best regards.
-
I owe you some stuff XD. Here are most of the Bitspower Fitting. I ordered 37 Multi Link 1/4, 2 1/4 caps, 7 multi adapters 1/4, 4 rotary elbows 90º 1/4, 2 3-way blocks 1/4, 2 temperature sensors and 70 UV blue seals. For now, this is most of what I need, but I still need 2 3-way blocks, 2 temp probes and 2 Multi Link Sli.
I also got myself 1 Mountain Mods bay cover and 3 120mm interior grilles from Mountain.
Some pictures of all the Bitspower fittings:
!
Bitspower temperature probe:
!
90º G1/4 Bitspower rotary elbow:
!
G1/4 SLI/CF Multi link Bitspower:
!
G1/4 Bitspower cap:
!
G1/4 3-way block and G1/4 Adapter Bitspower:
!
5-1/4" (Mirror Black) Mountain Mods bay and 120mm interior grille:
!
I checked the grilles more to have them just in case I might need them in the future, or if I change my mind at the last moment and decide to mount them.
Next week I hope another order arrives, which will include the radiators and the acrylic tube.Best regards.
-
Hello,
I have another truckload of Fittings, probes, grilles, and fans :facepalm: I'll leave you a preview of what's on the way.More Bitspower temperature probes, specifically I'm missing 2 to work the R.L with the Aquaero, I'm still thinking about whether to get the "5" or "6", most likely I'll get the 5, because there's stock and the 6 still lacks to have it on any page. What I want to do with the probes is to place 2 per circuit, I would place one at the entrance and the second at the exit, controlled with the flow meter. The function would be to work by dissipated power in watts of heat.
The grilles, I went for a traditional black grille model:
A couple of black switches with blue LEDs, the idea I have about the lighting is as follows:
I want to control the RGB LED channel with the aquaero, on the occasions that it suits to give color to the case. With the switches I'm going to put a black LED for the UV liquid, and the other for a white LED. I would use the second one with the concept of needing light to see inside the case.
The fans, I was undecided whether they should have LEDs or not, whether to get them transparent or colored. The final result has been these: Blacknoise Blue 2000 rpm:
I'm going to light them with LEDs, I still have this a bit stuck, I don't know if to put RGB LEDs, or blue…...I'll have the radiators and the tops soon.
I'll keep updating as I go.
Regards.
-
Gustavo from Pcrelic just sent me some photos. He shows us the EK double and single top. The double top comes with its own bench to place the pumps in a vertical position. The single one doesn't come with a bench, but Pcrelic has already arranged for me to get one for home.
According to what he tells me in the email, I won't have all the material for next week, but soon it will be here.Pcrelic EK D5- DOUBLE Top Bench
From here I send a big hug to Gustavo for his great work.
Regards.
-
Very cool, let's see how it's turning out, lately I see a lot of pcrelic sponsors XD if they pay I want one too :troll:
-
Very cool, let's see how it's turning out, lately I see a lot of pcrelic sponsors XD if they pay I want one too :troll:
Haha we have a premium account with Pcrelic….. To be honest with you it's the second purchase I've made with them, but I can guarantee you, that in terms of liquid cooling advice and as a company they are the best for me.
Thank you very much Tecnho, I hope this October I have all the material I need and I can make a big breakthrough in the thread.
Best regards.
-
Damn man, stop with your mods because then I look at my case and I see nothing but a sad piece of plastic :alone:
-
Damn man, stop with your mods because then I look at my case and I see nothing but a sad piece of plastic :alone:
Haha Obione, I'm a compulsive junkie, and this whole Mod thing is going to destroy me XD. Don't listen to me too much, because if you do you're going to end up like me <:(.
Best regards.
-
This morning I received the NB-Blacksilent along with the grilles and more Fitting.I'll leave you a few pictures of everything that arrived.
!
!
!
!
!
!
!
!
!
Now I'm at work and can't entertain myself much, so I'll give a brief talk later.
Regards.
-
My God, it seems like you are a Noiseblocker distributor :ugly:
-
Mae mía, parece que seas un distribuidor de Noiseblocker :ugly:
He comprado la fabrica NB jajaja, mas quisiera ;D
Son una pasada estos NB, el color azul de las hélices es una pasada. Luego el cable de alimentación PWM viene enfundado de negro, esto no se si lo cambiaré. Me gustaría hacer los paneles de la caja desmontable, lo que haría sería conectar una línea de ventiladores a un conector de manera que desconecto el conector y quito el panel.
Como podéis ver en las imágenes, hay dos tipos de cajas diferentes de ventiladores. Bien resulta que donde los he comprado según página pone que son la Rev 3.0, pero vienen dos diferentes. A simple vista son iguales, pero no es así, unos consumen más que los otros. La Rev 3.0 tienen un Power Wat 4,8 y los otros NB tienen un Power Wat 2,64.
Otro factor que aún lo tengo parado, tengo que ver cómo lo hago si es que lo hago, es meterle iluminación a los Fan NB, en la ocasión que lo requiera, porque tener todo el rato iluminados con luz, molestaría para día a día.
Al final voy a tirar por el Aquaero6 que trae control PWM y 30Wat por canal. Estaba mirando la posibilidad de montar 2 Aquaero6 y poner uno de esclavo, pero no es posible con este con el "5" LT si es posible….. De esa manera me saldría más barato que comprar todos los PA2 necesarios.
Edito: Os tengo que contar que he recibido otro paquete pero hasta esta noche no podré abrirlo...... jajajjaaj ¿Qué será??'
Saludos.
-
I hope those NB's are not as good as the silent-X that I bought one day because they were wonderful, and that after three months they were broken.
Let's see what they brought you... -
I hope those NB are not as good as the silent-X that I bought in their day for being a marvel, and that after three months they were broken.
Let's see what they brought you….Don't scare me, I hope not because after the fortune they cost me….... :muerto: I hope that at least they processed an RMA for you.
For now I won't be able to show you the last order that arrived. I'm a bit busy due to lack of time, until the end I won't be able to keep updating.
Best regards.
-
Don't scare me, I hope not because after the fortune they cost me.......:dead: I hope that at least they processed Rma for them.
For the moment I won't be able to show you the last order that arrived. I'm a bit busy due to lack of time, until the end I won't be able to keep updating.
Best regards.
Wow, what material you're getting yourself............... :ugly::ugly: Of the highest quality.....
I'm still following, to see how this all ends. ;).
Best regards
-
Vaya material te estas agenciando…............ :ugly::ugly: De primerisima calidad.....
Sigo atento, a ver como termina todo esto. ;).
Un Saludo
Y que lo digas Jotole, entre la configuración de la caja y la R.L se me esta yendo de las manos.
Os dejo un pequeño avance, hasta mañana no podre subir todo lo que me llego de Pcrelic.
Me he decidido en adquirir los Backplates Coldzero Gtx Titan y el puente 3 Sli EVGA Horizontal.
Tenía dudas si comprar el Backplate o no, debido a la salida de las Nuevas AMD y me diera por cacharrear.
Imagen del Backplate Coldzero Gtx Titan claro negro; de estos he pedido 3 unidades para cada Gpu:
!
Sobre el puente, de momento voy aplicarle esta placa EVGA, hasta que me haga del dichoso puente SLI con Led:
!
Mañana actualizare con mas material.
Un saludo.
-
As I promised I bring much of the requested material on Pcrelic. They would be the following:
EK-RES X3 - Anticyclone
EK-RES X3 - TUBE 150 Cylinder shaped tank body, Ø60x104mm this one is on the way…..
EK-RES X3 - TOP
EK-D5 X-RES 100 CSQ - Acetal - Top with reservoir for D5 pump
Koolance LIQ-702 High performance coolant 700ml UV blue
Acrylic - Tube 12/10mm Clear - 50cm
Hardware Labs Black ICE GT Stealth 360 XFlow - Radiator 3x120mm
Hardware Labs Black ICE SR1 360 - Radiator 3x120mm
EK-D5 Dual TOP CSQ - Acetal
EK-D5 Dual X-RES Link CSQA small advance of all the material together:
The stand for the single top made by Pcrelic:
!
!
Koolance LIQ-702 UV blue coolant 700ml:
!
!
Hardware Labs Black ICE GT Stealth 360 XFlow radiator:
!
!
!
!
!
!
!
!
!
!Hardware Labs Black ICE SR1 360 radiator:
!
!
!
!
!
!
!
-
Here we have the Tops, bodies, and anticyclones EK:
Top EK-D5 X-RES 100 CSQ - Acetal - Top with pump reservoir D5
EK-D5 Dual TOP CSQ - Acetal
EK-D5 Dual X-RES Link CSQ
EK-RES X3 - TOP
EK-RES X3 - Anticyclone (LONG)
Finally, Acrylic - Tube 12/10mm Clear:
!
!
!
!
!
This is everything so far, if nothing happens next week I will have the Backplate and the EVGA Sli support.
Regards.
-
Aquí vamos haber Los top, cuerpos y anticiclón EK:
! Top EK-D5 X-RES 100 CSQ - Acetal - Top con depósito para bomba D5
!
!
!
!
!
!
!
!
! EK-D5 Dual TOP CSQ - Acetal
!
!
!
!
!
!
!
!
!
!
!
! EK-D5 Dual X-RES Link CSQ
!
!
!
!
!
! EK-RES X3 - TOP
!
!
!
! EK-RES X3 - Anticyclone (LONG)
!
!
!Por último Acrílico - Tubo 12/10mm Clear:
!
!
!
!
!Esto es todo hasta el momento, si no pasa nada para la semana que viene tendré los Backplate y el soporte Sli Evga.
Saludos.
:love::love::love: Vaya Material….......!!!
Deseando ver el montaje.........!!
-
:love::love::love: Vaya Material….......!!!
Deseando ver el montaje.........!!
The build is going to be delayed a bit, until I have the Aquaero6 which I suppose will be here soon XD, and I want to make some modifications to the case one of them you already know what it is, remove the support of hell :wall:
Saludos.
-
Hi, yesterday I received new acquisitions from Coldzero, in which I bought the Backplate and the 3-Sli bridge support.First of all the Backplate Titan.
!
!
!
!
!
!
!
!3-SLI EVGA bridge plate.
!
!
!That's all for now, I will update as new ideas come to me and I receive more material that something is on the way XD.
Regards.
